Accent RB (2012+) :: RPM Climbs After Releasing Clutch And Gas?
I've been having some issues with my car lately, 2012 Accent 1.6 manual transmission 36,000km aprox. The RPM climbs after I release the clutch, for example I'm going from 1st gear to 2nd, or 2nd to 3rd or any change of gears around 2,500rpm and when I release the clutch the RPM climbs to 2,800 or so and stays like that a couple of seconds, today the RPM climbed from 2,500 to 3,000-3,200 and stayed like that again for a couple of seconds.
View 5 RepliesPassat (B6) :: Creaking / Groaning Noise From Foot-rest Area When Releasing Clutch
As stated in the title, I've been experiencing a creaking/groaning noise originating from the dead pedal/foot-rest area when I release the clutch as I'm accelerating from first gear. This happens more so when I'm accelerating from a stop on any sort of incline (irrespective of the grade) and primarily in the afternoon/early evening when the weather's at its warmest for the day.
The noise itself originated about a month ago. Although I describe it as a creaking/groaning it sometimes sounds like a slight metal on metal friction noise.
My car's stock with the exception of Driver Gear springs and a BSH 27mm sway bar in the rear. Wheels are OEM 16s. I've had the DG springs on my car for about 3 months before this noise began and mileage was around 9,900Km.
Golf IV / Jetta IV :: Creaking When Pushing In And Releasing The Clutch
I have done some research, but have found no one with the same noise as I am having. My clutch is creaking when pushing in and releasing the clutch. It does not sound like it is coming from the pedal. I have had a new clutch and transmission replace within the past 18 months. Someone mentioned the creak could be "dust on the slave cylinder." What this could be? Should I be worried? It shifts perfectly find and rides fine.
View 3 RepliesAccent RB (2012+) :: 2013 - Car Rolls After Parking / Clunking Noise While Releasing Brake From Stop
2013 accent auto My car rolls noticeably after parking unless the ground is completely flat. Parking brakes prevents it from rolling but I don't use parking brakes every time. Another brake problem I have is thump or clunk noise I get whenever I release a brake from stop.
View 12 RepliesAccent MC (2006-11) :: Brake Pedal Making Creaking Noise When Depressed
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
Accent RB (2012+) :: 2013 - Clutch Pedal Adjustment So That Engagement Isn't So Far Away From The Floor?
In most other manual tranny cars that I have ever driven, the clutch pedal engages/disengages within an inch of the floor. Not my accent. is it possible to adjust the clutch pedal so that engagement isn't so far away from the floor? it pretty much fully engages at the near top of the pedal.
View 2 RepliesGolf IV R32 :: Transmission - Loud Clunk When Releasing Clutch Pedal
My R has been giving me some trouble lately. First I had some issues, I thought were clutch related.
-A loud clunk when releasing clutch pedal (only when engine running) and sometimes when depressing it too.
-Randomly changing clutch biting point when driving hard. So e.g. when revving through 1st and 2nd gear the clutch would bite much lower than usual. (This was so weird.)
-Whistling sound when changing from 1st to 2nd gear.
Replaced the clutch, flywheel, pressure plate and the TOB and bled the system several times. Also new solid DLI motor mounts and new oem dogbone mount.
There was some side-to-side play on input shaft that I was told is not a big deal. Also this gearbox has always been much louder than other cars Ive driven.
Now that weird changing clutch biting point is gone but other issues are still there. And now, because of the lightweight smf and the motor mounts the gears shatter and whine so much more on low revs and during engine braking. I know 02m s tend to do that but its so loud I am a bit worried.
Accent MC (2006-11) :: Brake Squeak When Releasing Pedal
Started a few months ago didn't really bother me until now. Started when I would forget the parking brake is on and would just put the car in reverse & wouldn't move until I released the parking brake. Did it about 5-7 times and now every time I brake without the parking brake on, it squeaks & is really annoying. Is there any way to fix this or is it just gonna be complicated & expensive?
View 10 RepliesAccent LC (2000-05) :: Squeak When Releasing Brake Pedal
2004 Accent 1.6L 5spd
Purchased this car used with 64k miles on it. I am in the process of performing the 60k miles service items and going through typical replacement of worn parts.
I have noticed that my rear passenger brake drum assembly squeaks when I let off the brake pedal. Note that this is not noise when applying brake pressue, but after releasing the brakes. Additionally, the drum happens to be rusted very badly. It took a good amount of brute force to remove the drum in order to inspect the brake assembly. There was a lot of brake dust built up and I thought that cleaning that out would get rid of the noise.
I suspect it could be one of the springs but I cannot be for certain. The squeak does not occur when I release the parking brake.
Accent LC (2000-05) :: Light Grinding Noise When Let The Clutch Out / Pedal Super Hard
Yesterday I was driving home and my clutch started acting up. To start I was unable to press the pedal. The pedal was super hard, then let up but didn't feel right.
I removed the slave and the pedal went down fine. Both the master and the slave have no leaking and fluid levels are good. I haven't been able to have a buddy look at the levels when I press the clutch, but....
Here is a little more, the car shifts fine with the car off, it goes into all the gears, but with the car on it will not shift into gear. Also there is a light grinding noise when I let the clutch out..
I ordered a clutch kit already, but don't want to pull the trans if I don't have to, I would love to hear the issue is with the master or slave.....
2005 Hyundai accent with 138,000 miles
Golf VI R :: Creaking Sound From Pedal / Clutch While In 1st Gear?
I just got my R last week and I noticed that in first gear you can feel and also hear a creaking sound from either the clutch or gas pedal. I've read a few things and it has something to do with the Hinge of the pedal itself and I believe it can be solved with Lithium grease or something like that. Noticed this while in 1st gear?
View 7 RepliesDodge Neon :: 2000 - Clacking Noise At Low Rpm After Releasing Gas Pedal
2000 Dodge Neon clacking noise at low rpm after releasing gas pedal. Around the 2000 rpm range letting off the gas produces a clacking noise. I have listened to the engine with a long screwdriver at idle and revving. The noise is not always present in this condition. Although when it has come up it seams to coming from behind the engine. Does not seem to be valves, connecting rod or main bearings etc.... Only at low rpm 1200 thru 2000 rpm WHEN releasing the throttle. Clacking seams to be timed with the crankshaft as it reduces the sound as the engine reduces rpm, not at the speed of the cams. Sounds fine at idle, going through gears and at freeway rpm's.
View 1 RepliesPrius (Gen 2) :: Occasional Clunk Noise When Stepping And Releasing Brake Pedal
I get a clunk noise when stepping on and releasing the brakes occasionally but not always. This occurs even with the engine off and the vehicle stationary. I also hear some other noise like some sort of vacuum servo thing is happening.
View 4 RepliesFord Excursion :: Loud Roaring Noise When Releasing Gas Pedal Or Stopped
I have a 2000 X 5.4... There is a loud roaring noise when releasing gas pedal or stopped (doesn't matter whether its in park or drive)...noise stops when giving gas...the noise is almost like a bull horn...there are no engine lights on so can't get a code...
View 8 RepliesPrius (Gen 3) :: Honking Noise When Pressing / Releasing Brake Pedal And Squeak When Backing Up
I had 2 brake related issues. First was a honking noise when pressing/releasing the brake pedal (covered by T-SB-0363-10, attached below). Second was rear brake squeaks, particularly when backing up (T-SB-0102-11, attached below). I had the squeak issue repaired under a previous TSB a few years ago, but the noise came back after a while, and the updated TSB includes replacing the pads and other parts.
View 8 RepliesAccent RB (2012+) :: Front End Creaking Sound
So I've noticed in the past 2-3 weeks when I come to a stop I here a creaking sound coming from the Front end, I gotta get someone to stand outside while I stop just to clarify where the creaking is coming from? It only happened when I push down the brakes a little more aggressively to come to a quicker stop, not it's a sound that I shouldn't be hearing that's for sure.
View 3 RepliesPrius C :: 2012 - Revving Noise When Releasing The Accelerator
I've had my 2012 PriusC for about a year now and I'm loving it. As of a week ago the car has started doing this revving thing. I notice that the engine seems louder when I'm accelerating and it seems like I'm getting 30-40mpg instead of the usual 40-50 in cities (but it might just be me).
What worries me is that when I'm driving and I push on the pedal to accelerate, after I release the pedal there is a very loud whirring sound of the engine. It sounds like a MuscleCar or Racecar that is revving it's engine but not going anywhere. This sound happens if I accelerate lightly or severely and the revving sound is louder the harder I accelerate. I notice that if I accelerate and then ease off of the gas slowly, I don't hear the revving sound.
I notice that this seems to happen randomly, as in I start the car and it happens from the start, or I start the car and it doesn't happen at all for that drive.
Accent MC (2006-11) :: Clutch Engages When The Pedal Is Right At The Top
Just bought a 2009 Accent 5 speed I have 2500 miles on it .The clutch engages when the pedal is right at the top. Is there an adjustment on this vehicle I would prefer it to engage about mid stroke.
View 9 RepliesAccent LC (2000-05) :: Stalls In Neutral When Clutch Pedal Released
I have an 00 Accent 1.5 liter 5 speed with about 192000 miles on it. I have put about a tank of gas through it since I've owned it, so I can't give a lot of background on it. When I got it the previous owner told me it was popping out of fifth gear and the clutch fluid leaked.
Upon driving it around a while I noticed it would pop out of fifth and third gears almost at random, but seemed to happen more when I applied throttle. I assumed it was an issue with the shifter not fully engaging the gears, and checked out the bushings under the hood and in the console. All looked good, and I didn't see any extra play.
I drove the car for about 30 miles straight and had to downshift and wasn't able to get the car to go into any gear but fifth. I was moving about 20 mph when this occurred. I was able to limp along to a parking lot where I let the car sit for about ten min and I shifted through the gears when stopped. I headed back home with this problem throughout the trip. There is a sound that happens on occasion (that stops when I press the clutch pedal) that sounds like a bad bearing in the clutch area.
When I'm stopped with the car in neutral and I release the clutch the car stalls like it's in gear. I was able to get the car to move some, but it really doesn't want to it acts like there is something jammed in the gears and popped really loud when I backed it up.
There is fluid for the master cylinder, and I can see the slave cylinder moving when the pedal is pressed. I jacked it up and removed the plug to check for gear oil, and it came pouring out, so I think it has fluid in the gearbox. I'm pretty sure it needs a clutch at the least. I think there may be some internal damage in the tranny, and I'm only into the car for the time it took to power wash a house and don't want to get involved in a big mess.