Accent RB (2012+) :: Creaking Noise On Releasing Clutch Pedal
On releasing the clutch pedal, a creaking noise can be heard, which:
- sounds and feels like a rusty spring being unloaded
- occurs for the entire range of pedal travel, but worse near the bottom
- is louder outside the car than inside
- happens not only when driving, but also when stationary with the engine off
I don't think anything is wrong with the clutch itself, or any bearings, or major components... It just feels like something needs to be lubed. I've lubed the spring above the pedal inside the car, with no real effect.
Passat (B6) :: Creaking / Groaning Noise From Foot-rest Area When Releasing Clutch
As stated in the title, I've been experiencing a creaking/groaning noise originating from the dead pedal/foot-rest area when I release the clutch as I'm accelerating from first gear. This happens more so when I'm accelerating from a stop on any sort of incline (irrespective of the grade) and primarily in the afternoon/early evening when the weather's at its warmest for the day.
The noise itself originated about a month ago. Although I describe it as a creaking/groaning it sometimes sounds like a slight metal on metal friction noise.
My car's stock with the exception of Driver Gear springs and a BSH 27mm sway bar in the rear. Wheels are OEM 16s. I've had the DG springs on my car for about 3 months before this noise began and mileage was around 9,900Km.
Golf IV R32 :: Transmission - Loud Clunk When Releasing Clutch Pedal
My R has been giving me some trouble lately. First I had some issues, I thought were clutch related.
-A loud clunk when releasing clutch pedal (only when engine running) and sometimes when depressing it too.
-Randomly changing clutch biting point when driving hard. So e.g. when revving through 1st and 2nd gear the clutch would bite much lower than usual. (This was so weird.)
-Whistling sound when changing from 1st to 2nd gear.
Replaced the clutch, flywheel, pressure plate and the TOB and bled the system several times. Also new solid DLI motor mounts and new oem dogbone mount.
There was some side-to-side play on input shaft that I was told is not a big deal. Also this gearbox has always been much louder than other cars Ive driven.
Now that weird changing clutch biting point is gone but other issues are still there. And now, because of the lightweight smf and the motor mounts the gears shatter and whine so much more on low revs and during engine braking. I know 02m s tend to do that but its so loud I am a bit worried.
Sonata NF (2006-10) :: Rear End Making Creaking / Squeaking Noise While Driving Or Pushing On The Car
About a week ago I went over a dip in the road at about the speed limit and didn't realize how bad it was. Since then my rear end has been making a creaking/squeeking noise while driving or pushing on the car side to side. The struts seem to be ok, there is no bounce in the car. What this could be? I was thinking some sort of bushing somewhere?
View 16 RepliesGolf VI R :: Creaking Sound From Pedal / Clutch While In 1st Gear?
I just got my R last week and I noticed that in first gear you can feel and also hear a creaking sound from either the clutch or gas pedal. I've read a few things and it has something to do with the Hinge of the pedal itself and I believe it can be solved with Lithium grease or something like that. Noticed this while in 1st gear?
View 7 RepliesGolf IV / Jetta IV :: 2000 - Lights Not Flashing When Locking / Unlocking Or Releasing Trunk?
I've noticed that my turn signals/hazard indicators don't flash on my car when I release the trunk or lock and unlock the doors. I have 2 friends, one with a 2000 like mine and one with a 99.5 that do, and all the newer models I encountered at the car lot I used to work at did as well. I always figured it was a mid run model revision until I noticed my one friend's doing it, then I noticed the other.
View 9 RepliesAccent MC (2006-11) :: Shuddering When Pushing The Clutch In At Low Speed
At low speeds before coming to a stop the clutch shudders somewhat when I push it in. When quickly depressing the clutch when coming to a sudden stop....
View 4 RepliesCar Shaking While Releasing The Clutch When In First Gear
I've A Problem With My Car Nissan Tiida 2007
When In First Gear While Releasing The Clutch The Car Shakes
And If I Didn't Release It Fast The Engine Will Stall
Sonata NF (2006-10) :: Clicking Or Crunching Sound When Pushing Clutch Pedal Down
M/T 2010 Sonata. I'm just out of warranty at 102,000 mi. No issues before with clutch. I noticed a clicking or crunching sound when pushing the clutch pedal down. I took a gander and noticed the pedal was traveling farther than it used to because there were indentations in the carpet. So this happens for about 3 days. Then I start the car and cant get it into gear. If I shut it off, it easily goes into gear and I can drive. Usually it is ok after that point but is getting worse. Mechanic briefly tried to bleed it but the pedal stayed on the floor. He was able to get it to its original problem but said if he replaces the master & slave cyl then might as well do a new clutch. Because I had no slippage, no pedal issues or anything prior to clicking. Is 102k miles and 6 years usual time for these components to fail?
View 2 RepliesAccent RB (2012+) :: RPM Climbs After Releasing Clutch And Gas?
I've been having some issues with my car lately, 2012 Accent 1.6 manual transmission 36,000km aprox. The RPM climbs after I release the clutch, for example I'm going from 1st gear to 2nd, or 2nd to 3rd or any change of gears around 2,500rpm and when I release the clutch the RPM climbs to 2,800 or so and stays like that a couple of seconds, today the RPM climbed from 2,500 to 3,000-3,200 and stayed like that again for a couple of seconds.
View 5 RepliesEscort :: 1992 GT - Clutch Pedal Feels Slightly Loose When Pushing To Floor
I have a 92' Escort GT and the clutch started to act up, it's not burnt cause it is fairly new. The clutch pedal feels slightly looser when pushing it to the floor, the feeling like a cable snapped or something?
I'm pretty sure the clutch is a hydraulic one, not 100% .. Is there a hydraulic reservoir that somewhere that might be low?
Subaru - Impreza :: Puff Sound When Accelerate / Slow Down / Shifting And Pushing In The Clutch
Well I just bought my first car about 3 weeks ago, its been in the shop for 2 of those weeks after I discovered that I needed several repairs. The car cost 3300. Anyways I got screwed by the sketchy guy who sold me the car. To get back to the point, the car had transmission problems and did not make a puff noise before the repairs. It creates this sound sometimes on acceleration, slowing, shifting, and pushing in the clutch. It has almost a 100% chance of making this puff when starting the car up. What the problem is? 1999 Impreza Outback....
View 3 RepliesCivic - Honda - Clutches :: Strange Clicking Sound When Pushing Down The Clutch Pedal
I started having a strange clicking sound when pushing down the clutch pedal. I have 43,000 miles on it and I have driven the clutch well(I really don't believe I already worn it up). It goes away and then it comes back. There is no problem on shifting from gear to gear, it works just fine. It is only when I push the pedal that it starts clicking like it pushing against something. The car dealership was so useless, they said I need a new clutch and that warranty does not cover it because I may have been using the clutch badly. Also do you think that they have the right to tell me it is my fault even though I have the extended warranty for 100, 000 miles.
View 6 RepliesGolf IV / Jetta IV :: Rear Wheel Creaking On Rotation?
I am having a creaking coming from my rear wheel i have went back and tightened everything up to correct torques its a creaking like something is loose. I did just put my summer wheels back on with my adapters (h&r) and have tightened everything up to correct specs. I cant seem to figure out what the noise is i am hopefully going to get a video up of the noise. I tightened everything up in the break system (caliper pins/rollers made sure the pads were okay, the pads and rotros are new).
Suspension is tight (coilovers). Just cant seem to figure out the issue i have been through it a thousand times and the noise just gets louder and quicker as I accelerate that how i figure its on rotation.
Ford 6.0L Power Stroke Diesel :: A/C Compressor Clutch Won't Releasing
The clutch in my ac compressor is not releasing causing it stay on all the time and not cycle and get hot and freeze up the system. Also pulley seems to be angled like it's not sitting straight. Can I just replace the clutch on the front? if so what's all involved. I need to do the entire compressor?
View 12 RepliesGolf IV / Jetta IV :: 2003 Suspension Creaking / Clunking Noise
How to diagnose this creaking/clunking noise in my 03 Jetta TDI. It's only coming from the passenger side, and I primarily notice it at low speed on relatively uneven roads. I can replicate the noise by pushing up and down on the front passenger side corner.
For context, this started after I just recently replaced my front and rear suspension, plus some steering parts. I replace all four struts with Koni yellows, front CA bushings (with R32/TT), ball joints, tie rod ends, front strut bushings and bearings, and passenger side CV axle. In response to the noise, I also just did the front sway bar bushings, which definitely needed it, but didn't change the noise. I also removed the CV axle and re-greased the inner CV joint--to no avail.
Also, when I have the hood open and push up and down on the front of the car, I can see the cup where the top strut nut goes into will go up and down separate and apart from the body. The driver's side stays in line with the body when I try to the same on that side. Also, that cup is tight on the passenger side, whereas it will spin fairly freely on the drivers side. So, this has lead me to think that perhaps I didn't torque either or both of the top or inner strut nuts on the passenger side.
Here's a (fairly crappy) video of the noise/strut cup .....
Golf IV / Jetta IV :: Weird Creaking Sound All The Time Except While Turning?
i started hearing this weird creaking noise about a month ago. When it started happening it would only occur at very low speeds and then it would stop, now it happens all the time unless i'm turning. I've heard it could be bushings but I'm not sure. What weirds me out is a lot of the time it'll stop either when I'm turning or if I shift into neutral.
[URL]
Golf IV / Jetta IV :: 2003 - Front End Squeak / Creaking Usually At Slow Speeds
I have a 03 mkIV 2.0 with just over 106k miles. I have been noticing a sqeak/creaking noise coming from the front end usually at slow speeds and going over small bumps or even bad backroads. I can simply push down on the front of the car and hear it and it sounds just terrible. I took it to my local tire shop and they said it could be my sway bay links and bushings, but they look brand new and show no signs of deterioration. My struts and shocks are fine. Could it be ball joints or control arms?
View 6 RepliesGolf IV / Jetta IV :: 2002 GTI Front End Creaking When Accelerate In Second Gear Right After Shifting
I purchased a 2002 gti in Febuary with 161k miles. I believe it was a couple weeks after I bought it - it started making this creaking sound. At first it was more rare to hear it but it occurred going on uneven surfaces like up a steep hill or around an uneven turn or even stopping and going. It basically happened when the front end pitched up/down. It sounds almost like a rubber creaking or even plastic. (Some sort of bushing maybe? I'm no expert) Now it is rare for it not to make the creaking when taking off or slowing to a stop. It only occurs at lower speeds like right when taking off or at the very end of the stop right before the actual stop.
It will even slightly make the noise when accelerating in second gear right after shifting. (This is occasional) When I come to a complete stop and turn the wheel side to side ot will make the sound for a couple of turns and then go away. I have tried rocking the car and pushing down on it to replicate the sound. No luck. I lubricated various bushings and parts with silicon. It seemed to fix it but it only lasted for a few hours. (This could've been coincidental) It doesn't make the sound 100% of the time though. Probably at least 90% though when coming to a stop and going. It seems as the environmental factors (Temp and humidity) have a small effect on the creaking. I have a neuspeed 25mm front swaybar with endlinks.