Golf IV R32 :: Transmission - Loud Clunk When Releasing Clutch Pedal
My R has been giving me some trouble lately. First I had some issues, I thought were clutch related.
-A loud clunk when releasing clutch pedal (only when engine running) and sometimes when depressing it too.
-Randomly changing clutch biting point when driving hard. So e.g. when revving through 1st and 2nd gear the clutch would bite much lower than usual. (This was so weird.)
-Whistling sound when changing from 1st to 2nd gear.
Replaced the clutch, flywheel, pressure plate and the TOB and bled the system several times. Also new solid DLI motor mounts and new oem dogbone mount.
There was some side-to-side play on input shaft that I was told is not a big deal. Also this gearbox has always been much louder than other cars Ive driven.
Now that weird changing clutch biting point is gone but other issues are still there. And now, because of the lightweight smf and the motor mounts the gears shatter and whine so much more on low revs and during engine braking. I know 02m s tend to do that but its so loud I am a bit worried.
Camry :: 2007 V6 XLE - Loud Roaring Noise In Engine
Just recently starting hearing a loud roaring noise while driving my 07 Camry V6 XLE. It sounds like the gears are not shifting, like it is staying in low gear. Sometimes the sound will lessen if I'm driving over 15 mins. and some times it doesn't. RPM is around 2 or less, typically 1.5. Tried to check the transmission fluid but could find the stick. The car has about 142,000 miles. I hope the engine is not going.
View 1 RepliesChevrolet - Malibu :: Loud Roaring Noise When Accelerating
What could be causing a loud roaring noise when accelerating. I'm thinking it may be in the transmission but not for sure.1st I thought it was a CV joint going bad. Also acts like it's in 2nd gear. 2006 Malibu Maxx SS , 97,000 miles....
View 6 RepliesSonata NF (2006-10) :: Loud Roaring Noise Coming From Right Front End
I have a 2009 Sonata (4 cyl) with 110,000 miles.I have a loud roaring noise coming from my right front end. Jacked car up several times, all seems very tight and wheel spins smoothly. This has been going on for over 5000 miles and I have been waiting for the ailment to show its self more clearly in order to diagnose. sound does not change when turning in either direction or breaking. sound increases with speed and is quite loud at 55mph. Had to replace a tire and put it on the right front to see if it was tire wear and there was no change. sounds like loud road noise.
View 2 RepliesBMW - 325 :: 1986 - Loud Roaring Noise When Drive On The Freeway Or Even In Town
I have a 1986 bmw325 es. When I drive on the freeway or even in town my car sounds like a bi-plane, a loud roaring noise. A friend of mine suggested that it could be the tires. I took my car into a tire place yesterday and after riding with me, they think I need a new front hub assembly to replace the front wheel bearing. When I called a mechanic he said I should only put in a bmw part, not an after-market assembly. I called another mechanic and he said that bmw parts are made in Germany by not necessarily by BMW. In any case, to you think I should pay more for a bmw/German-made part instead of an after market part. The tire company was going to put in an Citrix assembly, whic his an after-market part.
View 6 RepliesDodge Neon :: 2000 - Clacking Noise At Low Rpm After Releasing Gas Pedal
2000 Dodge Neon clacking noise at low rpm after releasing gas pedal. Around the 2000 rpm range letting off the gas produces a clacking noise. I have listened to the engine with a long screwdriver at idle and revving. The noise is not always present in this condition. Although when it has come up it seams to coming from behind the engine. Does not seem to be valves, connecting rod or main bearings etc.... Only at low rpm 1200 thru 2000 rpm WHEN releasing the throttle. Clacking seams to be timed with the crankshaft as it reduces the sound as the engine reduces rpm, not at the speed of the cams. Sounds fine at idle, going through gears and at freeway rpm's.
View 1 RepliesAccent RB (2012+) :: Creaking Noise On Releasing Clutch Pedal
On releasing the clutch pedal, a creaking noise can be heard, which:
- sounds and feels like a rusty spring being unloaded
- occurs for the entire range of pedal travel, but worse near the bottom
- is louder outside the car than inside
- happens not only when driving, but also when stationary with the engine off
I don't think anything is wrong with the clutch itself, or any bearings, or major components... It just feels like something needs to be lubed. I've lubed the spring above the pedal inside the car, with no real effect.
Honda - Accord :: 2002 - AC Making Loud Roaring Noise When Turned On Full Blast
I have a 2002 Honda Accord coupe with 130K miles on it. A few days ago the AC started to make a loud roaring noise when it is turned on full blast. As you turn it down the noise gets quieter and when the fan is on low the roaring noise stops. Other than making this sound it is running fine and there are no other issues/noises coming from the car. What is causing this noise?
View 3 RepliesPrius (Gen 2) :: Occasional Clunk Noise When Stepping And Releasing Brake Pedal
I get a clunk noise when stepping on and releasing the brakes occasionally but not always. This occurs even with the engine off and the vehicle stationary. I also hear some other noise like some sort of vacuum servo thing is happening.
View 4 RepliesPrius (Gen 3) :: Honking Noise When Pressing / Releasing Brake Pedal And Squeak When Backing Up
I had 2 brake related issues. First was a honking noise when pressing/releasing the brake pedal (covered by T-SB-0363-10, attached below). Second was rear brake squeaks, particularly when backing up (T-SB-0102-11, attached below). I had the squeak issue repaired under a previous TSB a few years ago, but the noise came back after a while, and the updated TSB includes replacing the pads and other parts.
View 8 RepliesFord Excursion :: Passenger Side Seems To Be Roaring At Certain Speeds
So I think I'm having some issues with my front end. The passenger side seems to be roaring at certain speeds (25-40 and 80+). It's getting cold now and I still don't have much in the way of tools since the company that cleaned out our house after the fire ran off with most of them so I'm more than likely going to have to get it done at the dealership. Is it as easy of a job as I remember or am I forgetting something?
YouTube ....
I don't really know how to explain it really. It sounds like there is a motorcycle passing me or like I have a mud tire on that wheel is all. It's normal at the other speeds, but once I hit the "sweet spot" it just drones really bad and I can't even hear the motor. The only way I know to describe it is as a roar, it's really weird.
Ford - Escape :: 2008 - Loud Noise Then Stopped?
yesterday I drove my car and as I was turning the corner (luckily very slowly), all of a sudden I heard a loud noise and the car stopped. The rack pinion, wheel housing and what ever other things there are dropped to the ground because they were rusted through. Never had a warning. Is that a problem with these Fords, of course the car is totaled. Does insurance cover this, does Ford cover this? First time in my life, never buy another Ford again. Also have a Ford focus 2008, looks rusty underneath. Should I get rid of it ?
View 19 RepliesBMW :: 2008 - Stalls Upon Releasing Gas Pedal?
I had a question about a weird symptom that my 2008 BMW 528i is having. When I take my foot off the gas pedal when I'm going 10-30 mph, the car seems to brake/stall momentarily. It almost feels as if the car is jerking for half a second. If I slowly let off the gas pedal this doesn't happen. It also doesn't happen at high mph.
My dealer said this is normal but I have never experienced this in all my time driving a Tacoma or accord. Wondering what could possibly be wrong with the car.
Avalon 2005-12 :: 2006 - Loud / Roaring HVAC Fan Motor
The fan motor has a loud, low drone to it. I assume it is bad bearing "whir." It seems the fan is directly behind the left side of the glove box.
View 4 RepliesFord Excursion :: Shifting From Park Stuck And Not Releasing When Brake Is Applied
Have been getting stuck and not releasing when brake is applied? I know there is a rod that connects and releases this for brakes or something but can it be replaced easy or just bypassed which I would prefer ?
View 11 RepliesPrius C :: Engine Revving Up More When Releasing Gas Pedal
I noticed that when I'm stepping on the gas pedal, revving up, when I release the gas pedal I can hear the engine revving up some more instead of slowing down.
When I release the pedal even if the revolution light on the dashboard shows that it is slowly dropping, the engine is still making the noise as if I am stepping on the gas harder for about a second.
Example: I am at a stop, when I start going from 0 to 30 mph, if I release the gas right away that's when I notice this issue.
This doesnt happen when I'm cruising on the same speed and suddenly release the gas.
I wonder if this is an indication the my tranny is having a problem.
I have a 2013 prius C 2...
Buick - Lesabre :: 2001 Loud Roaring Sound At Morning Startup
When starting my car first thing in the morning, for the first few minutes there is a loud roaring seems like. The sound subsides and the car sounds normally after a little bit. The next issue is when I start the car after it is already warm. It starts very strange...It is a little hard to describe. As soon as you hit the starter it just turns over instantly, seems almost prematurely. And when you go to shut the car off, it just seems like it makes a loud noise and the motor abruptly shuts off. I am not too educated with vehicles, and I am just looking for some input. I just purchased this car a week ago with 82,200 miles on it I have never driven a Buick before so these things may be normal.
View 4 RepliesFord Transmission :: 4R75 - Loud Pop Noise And Reverse Stopped Working
I have had 2 transmissions brought to me, both complaining of no reverse. The first belongs to my nieghbor, its an 2005 F-150 4wd. He says last week it made a loud "POP" noise and reverse stopped working. This is a truck he uses for his work and its got 337K on it. A remanufactured transmission was installed at 70K.
The fluid in this transmission was very dark and dirty. I doubt it had been changed since the reman transmission was installed. Once I got the transmission apart, I found the reverse band was worn and broken. This is cast band, so it would make a rather loud "POP" when it breaks.
The sungear bushing was worn and grooved and scored the snout on the direct drum. The Over drive band was burned and pitted.
Since this is a remanfactured transmission the case is painted gray, the paint is blistering from heat. The torque converter has been so hot the paint blistered and the metal was rusting.
The sealing rings on the pump stator had cut mild grooves into the reverse drum and the snap ring that holds the intermediate one way clutch on the reverse drum was bent and about to fail.
The over drive servo snap ring was broken, which seems to be common on these trucks. The aftermarket replacement snap ring is hardened to resist breaking and is black in color
This transmission will be rebuilt with new gaskets, seals, clutches, both bands and reman torque converter. The overdrive band and low/reverse band will be upgraded with new bands that have a high carbon friction material, that will resist burning, installing a spiral snap ring and replacing the direct drum and sun gear.
The second transmission that lost reverse is from a 2006 F150 4wd. The owner of this truck removed the transmission himself and brought it to me. I am told the truck has a lift kit and larger tire. The residual fluid is clean and bright red. The owner has a drain plug installed in the pan, so I can assume the fluid is changed regularly.
Once I got the transmission part, the only damage I found was a broken reverse band. It appears this band has been broken for a while since 2 of the fingers on the band that would still engage were worn to the metal and and the friction material is burned. The band surface on planetary gear was slightly scored. Everything else in the transmission shows very little wear.
This transmission will be rebuilt with new gaskets, seals, clutches, both bands and reman torque converter. The overdrive band and low/reverse band will be upgraded with new bands that have a high carbon friction material, that will resist burning. Also installing a spiral locking ring on the intermediate one way clutch.
Nissan - Murano :: Brake Squeal When Releasing Pedal
I have a 2005 Murano, 96K.
In Aug 2011, I had the rear disc brakes/rotors replaced. Front ones were replaced in Feb of this year.
For the past month, whenever I release the brake, I hear squealing (no sound when I press the brake to stop). Last about 5 secs, or until I hit about 15-20 MPH. Seems to happen only after the brakes heat up. I've tried to "Google" the answer, but the answers are mostly for drum brakes.