Suspension - Nissan - Sentra :: 2012 - Making Clunking Noise While Turning Wheels Or Parking?
I have 2012 sentra with CVT transmission & 60,000 miles. I just got 60,000 miles service done. Service adviser called me to let me know that I need to have replaced upper strut bearing on the front (left & right) replaced because they are making clunking noise when turn wheels or parking. When I asked for the reason why they should go bed he told me that it's normal, some sand other debris could clog there or water could have damaged it.
View 4 RepliesGolf IV / Jetta IV :: Clunking Noise From Front Suspension
I am trying to find origin of clunking noise, but it is difficult to do as there is no visual signs and no excessive movements in any components.
Little bit of details and video. Noise occurs when moving rapidly steering wheel on stationary car with running engine. Not noticeable when at speed. Wheel is not vibrating and cv joints not clicking. Very tiny free movement in steering wheel about 1mm, but I am not sure if that is related maybe a completely different issue there. Mot tester make an advisory note that steering system slightly rough, but its not that useful to find an issue.
[URL] ....
Passat (B5) :: Clunking Noise In Front Right Suspension At 67,000 Miles
My 2002 Passat Wagon (2.8L, FWD) has started developing a clunking noise at 67,000 miles in the front right suspension. Based on forum search here, it sounds like a common problem with the control rods, tie rod ends, ...
I looked at the control arm kits available at ECS Tuning. Is this a DIY job for someone with only moderate mechanical skills? I have never performed front end suspension work before. How difficult is it? Special tools needed?
If I had it done (both sides, upper and lower) at an independent repair shop, how much might I expect to pay?
Lastly, is it best to replace all the parts (as provided in these kits), rather than isolating the part that is currently causing the clunk and just replacing what needs to be replaced?
Elantra MD (2010-15) :: 2011 - Clunking Noise In Front Suspension
I have been frustrated with my Elantra's handling from the time I purchased. I feel that the car is setup poorly and has design/OEM part issues.
I have improved the rear-end "hop" issue by replacing the OEM rear shocks with the KYB Gas-A-Just's -- a big improvement in handling the bumps. But the rear-end solid axle on such a light car is just crap...
I have developed quite a bit of 'clunking' noise in the front suspension.
I am considering replacing the front-end shock-strut assemblies with KYBs -- I'd love to hear if it made a big difference. Also wondering if I should change-out the 'sway bar link' while replacing the shock/struts.
I'm just so frustrated with the way this car handles (I've driven Subaru's, Honda's, and VW's) compared to other cars. I feel it's a combination of low-quality OEM suspension parts, rear solid axle, light weight, crappy electric steering settings, and tires that are too wide and too low-profile for such a light car. (I have the limited with 17 wheels).
Sonata NF (2006-10) :: Clunking Noise Around Front Suspension / Wheel Arch
I have a 2005 NF V6 Sonata Elite - for some time now there has been a sporadic clunking noise in and around the suspension or front drivers side wheel of my car. It got a lot worse a week ago when I took the car off sealed roads for a short distance, almost sounding like a CV that had gone. However a mechanic checked the car over a few days ago and found the CV was fine, as was the driveline. It seems to clunk more when turning, and when I put the power on or off. I also detect a slight vibration or hum coming from the area concerned when taking gentle bends at moderate speed on smooth roads. I can assume the wheel bearings are fine, although the mechanic I went to perhaps isn't very familiar with the make/model of car. They went around the suspension and tightened some of the struts, which made a small improvement I think, but the car is still making the noise. What was the cause of the noise if known?
View 4 RepliesFord Excursion :: Clunking Noise In Front End Only Happening During Suspension Travel
I have a noise in the front end that is only happening during suspension travel. It is really bad on bumpy roads. I thought it was my sway-bar end links but they are a year old and tight. I have checked the shocks and they are tight. It sounds like a clunking noise. Could the front drive axles be making this noise while not locked in?
View 14 RepliesPassat (B5) :: 1999 - Clunking / Popping Noise From Driver Side Front Suspension?
We have a 1999 Passat GLX 2.8 auto. I recently put on a new inner and outer tie rod as well as a lower forward control arm. The issue that we are experiencing is that when accelerating or braking hard there is a popping/clunking noise coming from the driver front area. When accelerating or braking normally/ smoothly it is fine. But, as I said accelerate or brake hard it will make a single pop or clunk and that is it, just once when braking hard or accelerating quickly.
View 2 RepliesTiguan :: 2012 - Clunking / Rattling Noise Coming From Front Passenger Side Suspension Arm
I just purchased my first VW, a 2012 Tiguan SE in Night Blue Metallic. The level of fit and finish, handling, and general feel are miles ahead of my old '04 Jeep Liberty.
Anyway, I've had the car for about 250 miles and have noticed a clunking/rattling noise coming from what sounds like the front passenger side suspension arm. The noise is fairly quiet but seems to consistently happen when turning left over uneven pavement.
I plan on taking it to the dealer this weekend and it is only a minor annoyance, but a shame since the rest of the vehicle is so quiet and refined.
Ford F-150 (2004-2008) :: Clunking Noise From Front Left When Turning Right Only
I have a 2004 2WD supercab. And am hearing a 'clunking' sound when I turn almost full-lock. Below is a summary of what I have experienced so far:
- My truck used to be lowered 2" (below stock) at the front since new. Last month I lifted it (front and rear) and it now sits 2" above stock on new rancho shocks.
- I installed a camber kit and had the front aligned (toe and camber) after the above suspension work.
- The truck drove beautifully for two weeks until one day a 'clunking' sound was heard from the front-left every time I turned left. The alignment also changed as I had to now hold the steering very slightly to the left to drive straight.
- The alignment shop re-did the toe tracking (the camber did not change) and the truck drove great for about a day. Now I can hear the same clunking sound when I turn right and the tracking is again screwed up meaning I need to hold the steering very slightly to the right to drive straight.
What parts are playing up and what may need replacing?
Ford Super Duty (1999-2016) :: Crunching / Clunking Noise Coming From Passenger Front Suspension
2012 truck, started making a noise today. I cannot tell what it is, but seems to be coming from the passenger front suspension, its a crunching/light clunking sound, happens when going over bumps, when the truck pitches one way or the other turning, and coming to a stop....
Truck has 6k miles, I did a quick visual inspection this afternoon, didn't notice much, but the sway bar endlink looked a bit odd though, not sure if normal, its gota little bend too it and seems to just contact the vac line mounted behind it, seemed unusual...
Maybe its its just one of the crappy rancho branded shocks is junk?
Golf VI R :: Front Suspension Clunking Over Bumps?
Aside from the clutch and gear changing noise, recently I've been noticing something that sounds almost like a rattle when going over bumps, say a series of filled potholes on a highway where they just slightly bump to move your wheel around, it's not that deep thumping you would expect to hear but it sounds like something is loose in terms of the suspension.
Happens on the front and seems like its coming from both sides. To me it sort of sounds like they forgot to tighten something up when they removed the shipping "blocks"/spacers, but I am not exactly sure what to check. I really do not want to visit the dealership at only 600 miles on the clock ...
Escort :: 1997 Sedan - Clunking Over Some Bumps And Turns
Got a 97 Sedan with 207k+ on it. Just did all struts (monroe quick-strut), brake pads, shoes, drums, rotors, calipers, rear and front sway bar endlinks, and lower ball joints. All hardware is tight and secured.
I am getting a clunk when I go over some bumps, but not all of them. I also find that it will clunk when I try to accelerate while turning out onto, say, a main road or something where I need to pick up speed. At times it sounds like it's coming from the passenger and others it sound like the middle or driver side.
Control arm bushings don't look too bad and would probably cause more noise when accelerating and braking. Both wheels are snug and don't move when tugging on them in the air. There is no play in the steering as well.
Golf IV R32 :: Clunking Sound From Right Front Suspension When Going Over Bumps
I have a clunking noise from the right front suspension when going over bumps. I've replaced the Strut bushings that were collapsed, the control arm bushings that had play and the noise is still there. There is no play in the links. There is a slight noise in the sway bar bushings when struck with a rubber mallet. I hate to keep replacing parts chasing down this noise.
View 9 RepliesPassat (B5) :: Front Suspension Clunking Vibration At Low Speeds
This just started happening on the driver side. Going over bumps and slight road wobble type imperfections make a medium pitched clunk sound. The sound stops as soon as I press the brakes ( which I just replaced last week). I do have a worn out bushing on the curved lower control arm. Could that be it? Do I need to replace all control arms or can I do just the curved set? If thats the issue.
View 13 RepliesSaab - 9-3 :: Right Front Suspension That Has Been Making A Clunking Sound
Today, I took my 2007 Saab 9-3 2.0T with 67,000 miles on it to a local mechanic to check the right front suspension that has been making a clunking sound when hitting potholes, etc. I was told that the right front coil spring is broken. This afternoon, I looked on line on some of the Saab discussion boards and saw that for cars up 2006 that there was an extended warranty offered for 10 years and 120,000 miles due to multiple cars with this problem caused by an, allegedly, faulty design that allowed the springs to corrode and fail prematurely in snow belt states that salt the roads.
View 3 RepliesFord Brakes/Suspension :: Clunking And Rattling In Front End
I have had a clunk in the front end that started out as a light clunk that was sometimes noticeable. It has now turned into a clunk that can be heard very often. It sounds like a hollow clunk. I'll try to explain it so it makes sense...If I'm going over a bump or speed bump or something like that it doesn't really do it noticeably. If I'm driving a get to a place where the road is uneven or there is a hole or pothole and the front end seems to "fall into the hole", then the sound is very audible, and I can feel it slightly in the steering wheel and under my feet in the drivers floorboard. So, I've had the front end checked out 4 times and between what they said to do and what I've read on here...here is what I've done so far......
Changed end links with moog end links
Changed sway bar bushings with moog bushings
Undid the bushing mounts from the front frame and wired the sway bar up to keep from flopping around. No change in sounds
Didn't get rid of the clunk....
Had front end shop check out truck... They said ball joints were ok, no play in them. They did say that they could feel some "clicking in the pitman arm pivot" when turning the wheel. Like something was loose in box.
I've changed shocks and bearings.
I can grab a hold of the passenger outer tie rod at the adjustment sleeve and rotate the tir rod and it will rotate around in the socket and hitting on the insertion point and make a metal thud sound.
Again, took into shop and they said that would be normal b/c the tie rods have to have that to keep from binding up in front end.
My thinking is that if the tie rod rotates that much, then it is rotating the drag link which in turn puts stress on the pitman arm which in turn has either broken or sheared the pinion shaft inside the box and then when I go over a hole, it moves and all of the above is put into motion.
Shop (Ford) basically called me an idiot and that wouldn't be the cause.
So, now onto my thoughts and questions....
Radius arm bushings
Axle bushings (????? how many and where are they all located)
tie rods and drag links..
Santa Fe (CM - 2007-12) :: Clunking Coming From Front Suspension When Go Over Bumps
I can't find the obd port on my new 2007 SF. Also there is a clunking coming from the front suspension when i go over bumps, what is the most common cause of this?
View 13 RepliesHonda - Accord - Suspension :: Clunking Sound From Front When Go Over Wavy Pavement Or Dips
I have a 2002 accord 4-cyl with a 5-speed with 89,xxx miles. Just a few months ago, I noticed a clunking sound coming from the front suspension when I go over certain bumps. "Certain" bumps are usually wavy pavement or dips (not wide dips, but short/concise ones), and sometimes certain speed bumps. Sometimes the sound happens regardless of the types of bumps though, but the aforementioned ones usually bring the noise quite consistently. The sound hasn't really gotten worse, but it hasn't been getting better either.
A while back when I had my timing belt done, the mechanic stated that one (or more) of my engine mounts were worn. Is it possible one or more of my engine mounts is the source of this issue (from the engine "rattling" around in the compartment. I'm not sure if that's even possible, just a hypothesis) or is it purely suspension. PS. The sound isn't quite a sharp metal on metal sound. Its more of a "thump" or "clunk" coming from the front end (left or right) as if its bottoming out or a bushing or spacer has worn off. Its just loud enough to drive me crazy, and sometimes I can feel it through the floor.
Chevrolet - HHR :: 2010 - Clunking From Front Suspension On Rough Road / Slow Speeds
2010 chevrolet HHR clunking from front suspension, rough road, slow speeds. Is this typical of worn sway bar bushings or something more expensive?
View 1 Replies