Golf IV R32 :: Clunking Sound From Right Front Suspension When Going Over Bumps
I have a clunking noise from the right front suspension when going over bumps. I've replaced the Strut bushings that were collapsed, the control arm bushings that had play and the noise is still there. There is no play in the links. There is a slight noise in the sway bar bushings when struck with a rubber mallet. I hate to keep replacing parts chasing down this noise.
View 9 RepliesSanta Fe (CM - 2007-12) :: Clunking Coming From Front Suspension When Go Over Bumps
I can't find the obd port on my new 2007 SF. Also there is a clunking coming from the front suspension when i go over bumps, what is the most common cause of this?
View 13 RepliesGolf IV / Jetta IV :: Clunking Noise From Front Suspension
I am trying to find origin of clunking noise, but it is difficult to do as there is no visual signs and no excessive movements in any components.
Little bit of details and video. Noise occurs when moving rapidly steering wheel on stationary car with running engine. Not noticeable when at speed. Wheel is not vibrating and cv joints not clicking. Very tiny free movement in steering wheel about 1mm, but I am not sure if that is related maybe a completely different issue there. Mot tester make an advisory note that steering system slightly rough, but its not that useful to find an issue.
[URL] ....
Elantra GD (2013+) :: Front End Clunking When Going Over Speed Bumps
Clunk in the front end when going over speed bumps? That is the only time I ever get it, never on bumpy roads or anything like that just at speed bumps. It seems to be louder on the drivers side but I am pretty sure its on both sides. I never noticed it until a couple speed bumps were installed along my normal route, but that could be because maybe I never drove over them previously?
View 3 RepliesSonata I45 (YF - 2011+) :: 2013 - Front End Clunking Noise Over Bumps
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
Ford Excursion :: Clunking Noise From The Left Front Going Over Bumps
I need to replace the rubber axle bumper guards. I have a clunking noise from the left front going over bumps. Troubleshooting I found the left front axle bumper guard is missing, right side is missing chunks and dry rotted. I had a question about how they attach. The one that is missing looks like a rusted bolt snapped off. Is it safe to assume a bolt goes right thru the center of the bumper guard into the frame? Couldn't tell on the right side it is in bad shape. Right front bolt may have sheared off on the bottom and just held in on the top by what is left.
View 5 RepliesSilverado :: 2001 - Front Suspension Bumps
I just recently did some work on the front end of my 2001 Silverado 2500HD (Replaced hub bearing assy, rotor and pads), and while working on the front end happen to notice something I need some guidance on. I happen to notice the bump stops are basically crushed as if the vehicle just sits on them all the time. Would it be worth it to replace these and would they just get crushed again, and further, should I adjust the torsion bars a bit to lift the front end up off of these?
I don't want obtain any huge lifts, just want to get off the bumps and maybe improve the ride a little bit in the process. I also did have a bad hub bearing on the drivers side and after seeing this bump stop wondering if that might be why.
Passat (B6) :: Front Suspension - Harsh Over Bumps
I have been working on my front suspension for last 4 to 5 months and not getting any luck getting rid of the harshness over bumps and the large amount of energy from hitting bumps that transmits back into cabin both from the chassis and steering wheel.
I solved one issue that can be read through on my post for "Bad Engine Mounts ?" but still does not feel solid like it should over bumps. So far this is what I have done.
- New LCA Bushings (solid rubber style rear and Whiteline front)
- Koni FSD Shocks
- VW DG Sport Springs
- 034 Density upper strut mounts
- Meyle HD Sway Bar Link
- ECS Sub Frame Bolt Kit
Had VW Dealer put on rack last week and they could not find any looseness any where in front suspension. In desperation I took LF suspension apart yesterday to see if there was anything that I could figure out that would cause the suspension to not absorb the energy and create this harshness I am feeling.
My first thought is to go back to stock upper strut mounts, there is some give in the OEM mount compared to the 034 Density mount, they are rock solid! The other thing I noticed is the sport spring is rubbing on the strut spring perch.
[IMG][/IMG]
Then after look at profile of OEM spring on bottom and new sport spring I noticed they are different, OEM is kinda like a hook and sport spring is round.
OEM matches strut spring perch perfectly.
[IMG][/IMG]
Sport spring is tight
I would consider putting OEM spring back in but really would like to lessen wheel/fender gap and OEM springs look like they have sprung, won't stand up straight on bench cause they are curved after they came out of OEM struts. Also, B6 has no rubber insulators where springs seats into strut, my B5.5 has rubber insulators both top and bottom.
Ford Escape / Hybrid :: Clunking Sound From Right Front Wheel When Going Over Bumps
I have a 2001 Escape XLT, when driving thru a parking lot or otherwise at slow speed and hitting bumps, I can hear a clunking sound from the right front tire. Its especially bad if I drive over cobblestone or on a dirt road. Could this be the CV joint? Ball Joint? How can I tell what it is?
View 4 RepliesPhaeton :: Front Suspension Creaking Sound When Going Over Bumps
Just recently I've been hearing a slight creeking sound coming from the front end when going over bumps. I don't have a lot of suspension knowledge so I'm not sure where to start looking and wanted to see if others had the problem, and what the outcome was? The car is at 60k miles.
View 20 RepliesFord - Taurus :: Rattle / Clunking Sound Coming From Front End When Going Over Bumps / Noisy CV Boot?
'01 Taurus with an occasional rattle/clunking sound coming from the front end when going over bumps. Took it to the local shopping center auto. service dept. (probably 1st mistake I know) They say the only thing they could find was the RH CV boot was bad and was probably the source of the noise. Doesn't sound right to me since the boot is rubber and what I hear is more of a metal sound..what I was thinking possibly a suspension link or tie rod end. I know what a bad cv JOINT sounds like and it's nothing like this. Now if the CV boot is bad I don't mind to replace it, but I don't want to spend the money if it is not going to solve the problem. I've never heard of a boot making noise before.
View 2 RepliesLexus LS 2007+ :: Front Suspension Is Blown / Bouncing When Go Over Bumps
Feels like the front suspension is blown in the front of my car and i got an alignment not too long ago and the sides are feathering already. spoke to couple of my friends and we have confirmed that the front is blown and also when i drive i see the front bouncing when i go over bumps. I just want to ask the people who did remove their stock suspension and see what brand they are.
View 8 RepliesPassat (B5) :: Front Suspension Clatter / Most Apparent Over Sharp Bumps
2003 passat gl; 1.8t w/all new front control arms, replaced to cure suspension noise, now metallic clatter persists, but any (even) light application of brake pedal and noise stops.. it is most apparent over sharp bumps...
View 3 RepliesPassat (B6) :: Front Suspension Squeaking Noise When Going Over Speed Bumps
2010 VW Passat - Sedan
See the attached videos. The first one (night time) was made before I took the car to the dealer the first time. Dealer said that I was going too fast over the speed bumps, so I made another video (daytime) showing the speed (10-13 mph). Both times you can hear a squeaking noise coming from the front that I just started hearing last week. The car has only 23,000 miles on it. I bought it brand new back in September of 2010. I don't know what to do because the dealer (of course) says that they checked everything and there is nothing wrong with the car.
What was the cause of it. I can take it to a mechanic and check it myself and then bring it to VW for repairs and telling them exactly what's wrong and why.
Video 1 .....
Video 2 .....
Passat (B6) :: 2006 - Front Suspension Squeaks Quite Over Bumps When Cold
I've got a 2006 b6 2.0 with about 92k on it. I bought it Cpo at around 68k 3 years ago this December. My auto tech said I'm going to need a new timing belt in about a month, so once this semester is over in a few weeks I'll be taking it in for that. Anyway, to my questions. My front suspension squeeks quite a bit going over bumps, especially when cold. Is this a sign of bad things to come in the future? Now my brakes, when they get wet they give off a very rough feeling, not very smooth. I have to slam on my brakes to 'wake them up'. Is this telling me they need to be replaced?
View 2 RepliesPassat (B5) :: Front Suspension Clunking Vibration At Low Speeds
This just started happening on the driver side. Going over bumps and slight road wobble type imperfections make a medium pitched clunk sound. The sound stops as soon as I press the brakes ( which I just replaced last week). I do have a worn out bushing on the curved lower control arm. Could that be it? Do I need to replace all control arms or can I do just the curved set? If thats the issue.
View 13 RepliesSaab - 9-3 :: Right Front Suspension That Has Been Making A Clunking Sound
Today, I took my 2007 Saab 9-3 2.0T with 67,000 miles on it to a local mechanic to check the right front suspension that has been making a clunking sound when hitting potholes, etc. I was told that the right front coil spring is broken. This afternoon, I looked on line on some of the Saab discussion boards and saw that for cars up 2006 that there was an extended warranty offered for 10 years and 120,000 miles due to multiple cars with this problem caused by an, allegedly, faulty design that allowed the springs to corrode and fail prematurely in snow belt states that salt the roads.
View 3 RepliesSedan :: Clunking Noise In Front Suspension Only Sometimes When Turning
So I got a steering problem and it's got me going crazy. I have a 06 g35 sedan lowered about an 1.5 inches. It's been about 5 months since I lowered it, lately I've been herring clunking noise in front suspension, not all the time but only sometimes when I turn. The other day my steering got really stiff and when I turn the steering won't return to the center. My Power steering isn't making any noise and I'm good on fluid. A lot of people say my ball joints but don't they usually make a lot of noise when they go bad ?
View 18 RepliesPassat (B5) :: Clunking Noise In Front Right Suspension At 67,000 Miles
My 2002 Passat Wagon (2.8L, FWD) has started developing a clunking noise at 67,000 miles in the front right suspension. Based on forum search here, it sounds like a common problem with the control rods, tie rod ends, ...
I looked at the control arm kits available at ECS Tuning. Is this a DIY job for someone with only moderate mechanical skills? I have never performed front end suspension work before. How difficult is it? Special tools needed?
If I had it done (both sides, upper and lower) at an independent repair shop, how much might I expect to pay?
Lastly, is it best to replace all the parts (as provided in these kits), rather than isolating the part that is currently causing the clunk and just replacing what needs to be replaced?