Golf VI R :: Clutch Noise Making Vibrations?

Searched through old threads but didn't come across these in particular, a lot to look through so may have missed in Car has 270 miles on it.

1) When clutch is in all the way and the car is revved, I can feel it in my left foot. This can be felt when car is stationary or in motion - Is this common for MK6/R? I don't recall being able to feel this in my MKV GTI

2) When the car is in motion, I hear a knock noise right after the clutch is pressed in. I can only hear the noise if windows are open and stereo is off, and this only occurs while the car is in motion. - Is this a standard clutch noise for healthy clutch/pp/flywheel/throw-out bearing on this platform, or should there be no noises? It sounds like something I'd expect to hear with a messed up throw-out bearing.

View 7 Replies

Golf IV / Jetta IV :: 2003 - While Shifting Making Grinding Noise - Clutch Or Engine?

noticing a few issues with my 2003 jetta 2.0 when driving/shifting....so first main thing I noticed is when shifting from 1st to 2nd gear often times it will make a grinding sound and not shift smoothly from 1st to 2nd....you have to do it real slow/gingerly ...if I short shift from neutral to 2nd its fine or if down shifting to 2nd its fine...I have changed the gear oil...other sounds idk if its my tranny or engine but if going up hill and you throw into 3rd and not going fast enough its makes a rattling sound and is sluggish I know its a old car 177,000 miles so idk just curious if this is a sign of problems?....Last thing after driving and getting home and putting into reverse gear to park it makes a noise like a chugging sound when reversing and can be finicky going into reverse.

View 1 Replies

Golf IV / Jetta IV :: Mk4 GTI Making Noise When Put It Into First Gear

Issue with my 2001 gti. When i put it into 1st gear its makes a weird noise and even when i drive in first but once i go to second it goes away and in all the other gears it dosnt make the noise. I think its the throw out bearing.

View 8 Replies

Golf/GTI VII :: Squeak Like Noise When Clutch Engages In 2nd And 3rd Gear

Currently driving a GTI mk7 autobahn 6MT, this is my first manual transmission i have owned.. and have a question about a squeak like noise i hear when the clutch engages in gear 2 and 3.

This does not happen all the time, however i noticed that some / most of the time when i slowly let the clutch out in gear 2 and 3, right after the clutch engages and i let it out the rest of the way, it makes a squeak kinda sound.. almost like springs contract / retracting, i can also slightly feel it in the pedal.

Question is ...is this some what normal? i have never owned a MT car, and cant remember if such a thing happened while driving friends / family MT in the past..

View 4 Replies

Golf IV / Jetta IV :: VR6 5 Speed - Clanking Noise When Letting Clutch Out In Gear

The car runs fine clutch has pressure and everything. I can idle with the clutch pressed down and put into reverse and every gear BUT if I put it in a gear and start to let the clutch out I can hear a clanking or something flying around in there and it doesn't really want to go anywhere and I don't want to really let the clutch all the way out in gear or let it out for too long and screw anything else up worse..

View 2 Replies

Honda - Accord :: Clutch Pedal Making Slight Snap Sound / Hard To Get Car To Engage In A Gear While Sitting Still

My clutch peddle made a slight "snap" sound last night and now it is very difficult to get the car to engage in a gear while sitting still, while moving it does ok, but not nearly as smooth as it should be. The other odd occurrence is that while the motor is running and the car is not moving, you can't shift any gears at all, but as soon as you cut the motor, all 5 gears and reverse are easily accessible. Why the sound at the peddle and the trouble in the gear shift mechanism? I am only an advanced beginner with car repair, but I think think this is really bad... 2007 Honda Accord Manual Transmission

View 8 Replies

Tiguan :: Noise Like Changing Gears In Manual Car Without Clutch Completely Depressed

I have a 2011 Tiguan 125TSI with the 7 speed DSG. When it starts cold, you can hear a noise that sounds like a bad gear change when going from 3th to 4th, and 4th to 5th. It almost sounds like changing gears in a manual car without clutch completely depressed. It has been there since I got the car brand new, but recently it seems to be getting worse.

Once the engine gets warm, the sound goes away and gear changes are smooth.

I've asked the VW dealer about the sound and they tell me it is normal. Is this right? The problem is it is very hard to demonstrate to VW the issue since it may happen only once when the engine is cold. I've left it with the dealer overnight and they were able to reproduce it in the morning... but again, they tell me this is normal.

View 2 Replies

Ford Excursion :: Fan Clutch Making Noise?

I've had a jangling fan clutch for awhile. Would love to get ridbof this. Any tricks to get rid of that noise? Pretty sure its functional, just noisy.

View 10 Replies

Ford 6.0L Power Stroke Diesel :: 2005 F250 Making Noise When Letting Off Accelerator Or Changing From P - D

2005 ford f250 6.0 Started making this noise from front about a month ago, can't figure out what it is. Only happens when letting off accelerator or changing from P - D. The truck acts normal, seems to be louder when the truck is warm.

[URL] .....

View 2 Replies

Ford A/C :: 1996 F350 - Clutch Making A Lot Of Noise

I just got done changing a/c clutch on a 96 f-350 5.8 because it was making a lot of noise. The new one is just as bad. Would the air gap cause this? When I took it off I could see it was hitting the pulley. The gap was 0.21 is that the specs on it.

View 3 Replies

Lexus GX 2004-09 :: AC Clutch Shot - Making Grinding Noise

My 04 GX has about 113k on it and the A/C clutch is shot, making a ton of grinding noise when its engaged (when the A/C is on).

Need to repair or replace there unit because of this? I see online the ability to buy just the clutch pack for the A/C compressor. However Lexus and other sites want to sell me the whole A/C compressor.

Question being, can I get away with buying the clutch pack and installing it onto my OEM a/c compressor? Or do I buy a new compressor?

View 2 Replies

Caprice :: A/C Compressor Clutch Making Lots Of Noise When Working

Pretty sure the a/c clutch on my LT1 is going - making lots of noise when working and also when not.

I've heard on some forums that this could be a bearing? Is it advisable for me to replace the entire clutch or just this bearing?

Either way, I assume I'll have to pull the clutch for which I think I'll need two special tools:

(1) clutch holder tool to break nut loose.
(2) pulley puller.

View 3 Replies

Subaru - Legacy :: 1999 - Clutch Seems To Be Slipping, Making Some Noise In 3rd And 5th

The car has about 142,000 miles. Is the clutch on this car adjustable? My repair files indicate it was "adjusted" a couple times, $40 each time. Now I think I might need a new one: it seems to be slipping, making some noise in 3rd, and in 5th.

View 2 Replies

Ford A/C :: 2003 - Navigator A/C Clutch Started Making Noise?

Here is what happened. I bought the truck used a few years back. The A/C clutch always made a clunking noise when it engaged first thing in the morning but then when restarting later in the day no noise. No noise either once it started up, the compressor ran quietly.

Then I recently went camping, it was just this past weekend and we had a bunch of rain. So I had on the front defrost mode on the heater for the windshield. I let the truck idle for about 15 minutes. The wife noticed that the truck was overheating (I have a Taurus fan installed and the fuse blew on the controller thats another story for another time, I got that fixed. I think it was because the clutch was trying to engage but couldnt and it made the fan controller overheat and the fuse blew) So I popped the hood and it was smoking under the hood. So I turned off the defroster and hear some noise under the hood. The AC clutch was not engaging when on the defroster mode and is making a clunking/grinding noises all the time now.

When I returned home I checked the fuse for the AC clutch and it was blown. So I replaced the fuse and it engaged the clutch by turning on the A/C, the clutch engaged and the compressor sounded fine and the clunking noise went away, it also blew cold air all the time the A/C was on, with this it looks like the compressor is fine.

Then I tried the defroster setting again to simulate what had happened at the campground and the clutch was engaging at first then started to slip and I could smell it burning. So I shut it off. The A/C clutch is still making a clunking /grinding noise noise and wont engage at all now even when turning on the AC.

So for a second opinion from all of you, does it look like I can get away with just replacing the clutch assembly? Also does the clutch assembly come with the new magnet, bearing, and plate?

View 6 Replies

Ford A/C :: Compressor Clutch Making Noise / Would Engage Or Disengage

The A/C in my truck stopped working last year, and this year I intend to fix it. I believe the problem is with the compressor clutch because it was making noise as it would engage or disengage. It was making this noise for a good year or so, and then one day the noise stopped and I have no A/C. So I am only assuming its the clutch.

View 4 Replies

Golf IV / Jetta IV :: Compressor Clutch Bearing Making Sound

I found out that the bearing in the compressor clutch is the one making my car sound like crap... but I have been looking for it and everywhere I call they only sell the whole compressor that is expensive. I was thinking on get the clutch out and lube the bearing up or something but I don't know if I have to discharge the freon for doing it ... How to remove the AC clutch ?? Its an mk4 btw....

View 4 Replies

Chevrolet - Camaro :: 1987 - Clutch Making Rotary Grinding Noise

I have a 1987 Camaro with a 305 TPI V-8, with a 5-speed manual transmission. I rebuilt the transmission, and installed a new clutch, pressure plate, throw out bearing, and had the fly wheel ground (which the machine shop said that it took very little material off to get clean-up). When we first got the car running when the car is moving in any gear (even in neutral) with the clutch peddle down, I get a rotary grinding noise (but only about 30% of the time). If I let the clutch pedal up the noise stops immedately. The transmission shift smooly, in all gear selection. I thought that I had gotten a bad throw out bearing, so we installed an other new throw out bearing, but I get the same noise. Is there something that could cause this noise inside the transmission?

View 8 Replies

Subaru - Forester :: 2003 - Transfer Clutch Assembly Making Noise

I have a 10 year old 2003 Subaru Forester in "very good" condition....except that the transfer clutch assembly is starting to make noise and the repair shop (at the dealer) says, housing has to be replaced also. The car has 130K miles and has had all its regular maintenance for 10 years. The only major mechanical problem we've had are the head gaskets (which on this year's model were NOT part of the recall). Those were fixed 2 years ago. Some of what I see in the online chatter about transfer clutches suggests that this is a slippery slope and the next thing you know there's the "next thing" that needs to be worked on. We were hoping that the 2014 Forester would get really good mileage (this one got 30 when it was younger) but we hear it will only be 32 mpg so we're inclined to "keep waiting" if this car can be kept happy. Is a transfer clutch repair a big deal?

View 7 Replies

Touareg :: Thumping Noise When Changing Gear

Experienced a thumping noise when changing gear (automatic gearing). FOr eg. when i change from P to R or even D, there's a thumping noise which i think comes from either the gearbox or the diff. either way, sometimes the thumping noise is there and some other times, its gone.

I've only done around 1500 kms since new and if there's no solution, i'll just take it to the dealer and get it diagnosed.

View 1 Replies