Chevrolet - Camaro :: 1987 - Clutch Making Rotary Grinding Noise
I have a 1987 Camaro with a 305 TPI V-8, with a 5-speed manual transmission. I rebuilt the transmission, and installed a new clutch, pressure plate, throw out bearing, and had the fly wheel ground (which the machine shop said that it took very little material off to get clean-up). When we first got the car running when the car is moving in any gear (even in neutral) with the clutch peddle down, I get a rotary grinding noise (but only about 30% of the time). If I let the clutch pedal up the noise stops immedately. The transmission shift smooly, in all gear selection. I thought that I had gotten a bad throw out bearing, so we installed an other new throw out bearing, but I get the same noise. Is there something that could cause this noise inside the transmission?
View 8 RepliesGolf IV / Jetta IV :: 2003 - While Shifting Making Grinding Noise - Clutch Or Engine?
noticing a few issues with my 2003 jetta 2.0 when driving/shifting....so first main thing I noticed is when shifting from 1st to 2nd gear often times it will make a grinding sound and not shift smoothly from 1st to 2nd....you have to do it real slow/gingerly ...if I short shift from neutral to 2nd its fine or if down shifting to 2nd its fine...I have changed the gear oil...other sounds idk if its my tranny or engine but if going up hill and you throw into 3rd and not going fast enough its makes a rattling sound and is sluggish I know its a old car 177,000 miles so idk just curious if this is a sign of problems?....Last thing after driving and getting home and putting into reverse gear to park it makes a noise like a chugging sound when reversing and can be finicky going into reverse.
View 1 RepliesLexus GS 2013+ :: 2015 - Passenger Side Front Left Wheel Making Grinding Noise
My 2015 Gs 350 F sport started making grinding noise from the front passanger side wheel. The noise comes from driving and not braking so im assuming its not the brake pads and its not squeaking noises as a worn out brake will sound.
View 14 RepliesElantra XD (2001-06) :: 2004 - Transmission Making Slight Grinding Noise When Putting Into Reverse Only
No codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.
View 1 RepliesLexus RX 2004-09 :: Shot Squawk Or Squeal On Cold Starts
2004 95K. Over the past month or so there is a short squawk or squeal when starting the motor. This has only been happening when the temperature outside is 20 degrees or below. The belts are new, including the timing belt. What would you check first?
View 7 RepliesLexus RX 2004-09 :: Fan On Lower Speed Making Chirping Noise
I'm having an issue where when the fan is set to the lower fan speeds it will make a high pitched, harmonic chirping noise. I've isolated it to the operation of the fan, so I know it's something to do with the HVAC stuff.
View 2 RepliesLexus GX 2004-09 :: Mirror Started Making A Clicking Noise
So I was driving my wife to dinner the other night, it was about 30* F out and the mirror started making a clicking noise (of course, I had no clue it was the mirror until I stopped and looked around). Sure enough, the mirror was clicking and the display was going back and forth between the "188" (the start-up display) and "NW" or "W" or whatever direction we were traveling in.
Obviously the clicking noise is a relay.
Lexus GX 2004-09 :: 2005 - Started Making Clunking Noise?
'05 Gx470 w/ 93k mi. Time for new parts for all orig. frt. suspension? Started having "Clunking" up frt. Assume time for new shocks all around. Also, grease from upper ball joints half-way down steering knuckle arm, so probably dry? Thinking of replacing everything up frt. incl. hub bearings while have all apart and be done w/ it. Notice in FSM that this means replacing both upper and lower control arms that come w/ bushings and ball joints installed. Parts very pricey even w/ discounts ( 27% at myLparts), somewhere around $3,500 +/-, incl. rr. shocks. Rather cry once and hopefully get get another 90K +/- mi. w/o problems. I've always gone w/ OEM parts in past and probably paid the price, but since I'm doing all the work, hopefully evens out in long run.
View 1 RepliesLexus GX 2004-09 :: Power Steering Grinding Noise While In Drive
Experiencing a grinding noise when applying the brakes and the transmission engaged in Drive and applying power left or right on the steering wheel? For example, I am going through drive thru and and wheel are slightly turned to the the left and a grinding/buzzing sound starts..
View 2 RepliesLexus RX 2004-09 :: 07 - Serpentine Belt Tensioner Pulley Making Noise
My tensioner pulley is making noise.I replaced the rear idler pulley (can't get to the front one), but still have the noise. Mention a DIY for replacing the tensioner pulley bearing. A part number for the bearing?
View 2 RepliesLexus GX 2004-09 :: 2005 - System Won't Play CDs - CD Changer Making Noise
Trying to load the CD ... I put in 6 discs I've tried them label up, label down, Compact Disc Digital Audio, and regular CD-RI hear the changer making noise when installed. The system won't play the CDs. It just says "No CD" At one point it put up a "Bluetooth connectivity problem" message. The rest of nav sys seems to work. 2005 Nav Sys Factory Changer. I've never used it and just got the car.
View 8 RepliesLexus GX 2004-09 :: Clutch Fan - Noise Is Coming From The Front Of Motor
About 2 months ago,we noticed a slight noise when first starting the truck in the mornings.The noise was so faint,I could never tell where it was coming from.The noise went away when vehicle warmed. This morning,I drove it for the first time in a while,and its pretty loud now. Its definitely coming from the front of the motor somewhere.I am thinking it sounds like bearings starting to go bad.When looking at the fan spinning from the side of the truck,it does not spin true,there is a very slight wobble. With the motor off and grabbing the fan in the middle,with force,I can very slightly wiggle it back and forth. I should NOT be able to do that,correct?
By the way,truck has 142,000 miles on it and the water pump and timing chain were changed at 117,000 miles.
Lexus RX 2004-09 :: 2007 - Rattling / Grinding Noise While Accelerating From Stand Still?
I have a 2007 RX350 with about 243,000kms on it. I recently purchased this car and everything is great on it except one thing. As of late, I've begun to take notice that when I accelerate from a stand still (for example after stopping at a light/stop sign), a loud rattling/grinding starts and then as I pick up speed and change gears, it fades away. The sound is more rattling than grinding. As if there is a metal bowl with some smalls stones in it and someone is just shaking that. There is also another sub issue that I'm having. There seems to be a clicking noise every time I apply the brakes or even accelerate. The same clicking noise reoccurs every time I put the gear into drive from neutral. However, when I do that, there is only click as opposed to braking/accelerating, where there are many. I'm hoping this is all part of the same issue and not isolated issues.
View 1 RepliesLexus GX 2004-09 :: Grinding Type Noise Coming From Underneath While Driving
I have a grinding type noise coming from underneath. Not there all the time..heard it last night while driving home....pulled over and waited for a while looked underneath could not see anything. Started off again heard it momentarily then it stopped....but I am thinking that this could be axle/wheel related/ball joint? No engine issue coming from the chassis underneath, possible bearing?
I have a 2003 Gx with 245K on it....but overall runs great!
Golf VI R :: Clutch Noise Making Vibrations?
Searched through old threads but didn't come across these in particular, a lot to look through so may have missed in Car has 270 miles on it.
1) When clutch is in all the way and the car is revved, I can feel it in my left foot. This can be felt when car is stationary or in motion - Is this common for MK6/R? I don't recall being able to feel this in my MKV GTI
2) When the car is in motion, I hear a knock noise right after the clutch is pressed in. I can only hear the noise if windows are open and stereo is off, and this only occurs while the car is in motion. - Is this a standard clutch noise for healthy clutch/pp/flywheel/throw-out bearing on this platform, or should there be no noises? It sounds like something I'd expect to hear with a messed up throw-out bearing.
Ford Excursion :: Fan Clutch Making Noise?
I've had a jangling fan clutch for awhile. Would love to get ridbof this. Any tricks to get rid of that noise? Pretty sure its functional, just noisy.
View 10 RepliesHyundai :: New Rear Brakes Making A Grinding Noise Around 15 - 25 Mph
My car came back from the shop yesterday with new brakes and pads and seems to be making some odd noises, both at low speeds and while breaking. I called the shop this morning and they said that this sound was normal for awhile but to come back in a week if it persists. Is this sound advice, or should I be driving my car right back to the shop?
2005 Hyundai Tucson 122,000 miles
Tiguan :: Brakes Making Grinding Noise When Applied
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 RepliesLexus RX 2004-09 :: Power Steering - Pump Started Making Noise And Low On Fluid
I have a lexus rx 330. Pump started making noise and low on fluid. We replaced all the belts and new pump. After installing new pump it was leaking from fill cup cap when driving also making a lot of noise on cold start. Mechanic said new pump was bad so we put in another one. Car ran fine as soon as we put it in and bleed good. Following morning again a lot of noise on cold start and noise goes away about 10 minutes but again small amount of fluid leaking from cap on fill cup. I replaced the rubber ring on cap to get a tight seal but again nothing.
View 6 Replies