Volvo - 240 :: 1992 - Loud Clunk When Flooring The Gas Pedal
When I 'hit the gas' I hear a loud clunk or short scratching noise (definitely metal) before the engine starts revving up. I've researched the issue a bit but found no concrete answers. Motor mounts, timing, transmission issue? No one thing seems to cause it as far as I can tell.
I got my '92 Volvo 240 Non-Turboalmost a year ago and haven't really thought much of the noise, but I'm coming up on a 500mi trip to Northern California. I want to make sure it's in tip-top shape before I leave. [IMG]
Prius (2004-09) :: Loud Creaking Noise When Press Down Brake Pedal
I've a UK 2004 gen ii with 69000 miles on the clock. When coming to a stop and also when at a stand still if I press down the brake pedal I get a rather loud creaking sort of noise. I guess that's friction brake related as no noise with using brakes when driving. Also a high pitch squeal when driving and turning steering wheel slightly to the left that stops when you press the brake pedal.
View 19 RepliesFord - Explorer :: 2002 - Loud Clunk Noise When Put It In Reverse
2002 ford explorer 4x4 150k miles when i put it in reverse a loud clunk noise but when put in drive no clunk noise. But on highway when its shifts a very loud clunk and like a real hard shift !!!!!o/d light is flashing also .transmission shift solenoid ? rear ?
View 8 RepliesVolvo :: 1976 245 Engine Runs But Losing Compression When Press The Gas Pedal
Does this sound like a choke issue? The car starts up fine and runs like a top. It even drives normally for about a mile, but then as the engine warms up it starts losing compression when I press the gas pedal. The engine runs fine when my foot isn't on the gas, but stutters and won't go anywhere when I'm pressing the gas.
View 1 RepliesFord Super Duty (1999-2016) :: 2004 F350 - Loud Clunk Noise In Forward Or Reverse Hi Or Lo When Accelerate
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 RepliesChevrolet - Malibu :: Loud Grinding Noise In Reverse When Gas Pedal Pressed
I have a 2005 Chevy Malibu, automatic transmission. When I put it in reverse and then press the gas pedal, I get a rather loud grinding noise for a couple of seconds. What is causing this, and is it doing any real damage? I have no other problems with the transmission.
View 2 RepliesPassat (B6) :: Reverse Jumping Out Of Gear / Loud Grinding Noise And Pops Back In
I have a problem with my reverse in a 5 speed 105 hp Tdi. It jumps out of place when i try to move the car, makes a loud grinding noise and pops back in, I'm guessing the selectors are worn or maybe the teeth are too. My question is, how hard is it to replace the selectors (if it is the selectors that are worn of course), what is the cost of getting it done in the shop and most important does this sign mean I will have the same problems with the rest of the gear in nearby future?
View 2 RepliesLexus GS 2006-11 :: Brakes Making Loud Squeaking Noise When Go Into Reverse And Back Up Slowly
I just got a 2009 lexus gs 350 everything is perfect except when i go into reverse and back up slowly the brakes make a loud squeaking noise!! Its really annoying and embarrassing. I got the rotors resurfaced and nothing.
View 3 RepliesFord - F150 :: 2006 - Driver Side Power Window Roll Down But Would Not Roll Back Up
I have been having problems with my drivers side power window on my 06 Ford F-150. At first, it would roll down, but wouldn't roll back up, so I replaced the switch. After replacing the entire power window control switch, if you push the switch for the drivers window down, it will start to go down, then stop, and you have to press it about 20 times to get it all the way down. You can definitely hear the switch clicking off. All the other windows work perfect. I took it to get the oil changed and asked about it, and they said to change out the regulator, which I did, but the same thing happens. I checked the fuse and that was fine. Is there a relay or something I should check?
View 12 RepliesPhaeton :: Loud Bang Or Clunk Underneath The Pedal
2005 V8 Phaeton,82,000 miles.
If I ease on the brakes ,no problem but if I hit the pedal there is a loud bang or clunk from underneath,sometimes front and sometimes in the back. It's as if the wheels stopped but the chassis went forward and back slightly. As long as I put the brakes on gradually there is no problem stopping.
When I come off the Interstate and leave the off ramp, the low side of the front end sounds as if there is no shock absorber ,doesn't matter which side is low,they both do it on the low side.
Intermittent problems.
Steering wheel turns and grinding,groaning noises from under the hood, not all the time.
Going over a speed bump in a parking lot causes the same noise I get exiting the Interstate.
Golf IV R32 :: Transmission - Loud Clunk When Releasing Clutch Pedal
My R has been giving me some trouble lately. First I had some issues, I thought were clutch related.
-A loud clunk when releasing clutch pedal (only when engine running) and sometimes when depressing it too.
-Randomly changing clutch biting point when driving hard. So e.g. when revving through 1st and 2nd gear the clutch would bite much lower than usual. (This was so weird.)
-Whistling sound when changing from 1st to 2nd gear.
Replaced the clutch, flywheel, pressure plate and the TOB and bled the system several times. Also new solid DLI motor mounts and new oem dogbone mount.
There was some side-to-side play on input shaft that I was told is not a big deal. Also this gearbox has always been much louder than other cars Ive driven.
Now that weird changing clutch biting point is gone but other issues are still there. And now, because of the lightweight smf and the motor mounts the gears shatter and whine so much more on low revs and during engine braking. I know 02m s tend to do that but its so loud I am a bit worried.
Ford - Explorer :: 2003 - Loud Clunk When Put The Truck In Reverse And Once Hit The Gas
I am trying to track down where exactly a clunk is coming from on a 2003 Explorer 4x4(auto, hi, low). My buddy brought it by my house yesterday and i cannot pin point it. If you put the truck in reverse, once you hit the gas, it clunks pretty loud. If you just put it in reverse, let off the brake, it will not do it until you hit the gas.
I got the explorer up in the air and crawled under it. I had my buddy switch from forward to reverse, and back again. Every time he let off the brake in forward or reverse, it would clunk. The reverse clunk was definitely louder.
It does the clunks in all settings, -auto,hi,low. No flashing dash lights. The dash lights do come on accordingly. One thing he pointed out was the Auto,HI,Low Buttons themselves are not backlit anymore. Not sure if that has anything to do with it?
I cannot narrow it down as the whole transfer case, front driveshaft and front diff, shake with the clunk. U joints don't seem to have play (prying with small prybar). I then went ahead and unplugged the big wire connector at the transfer case and the clunk went away.
Grand Prix :: 2004 - Loud Clunk While Having The Car In Reverse And Power Braking It
In my 2004 Comp G I have an extremely loud clunk when braking. The braking clunk does not happen all the time. There is a clunk while having the car in reverse and power braking it. While holding down the brake and revving hard and fast it make the loud clunk every time. It will not do it all the time in drive though. I can not pin point which side it is coming from. It sounds as if it is mostly the right. It almost sounds as if it is coming from inside the trans near the pan area?
I have replaced the lower control arms, sway bar bushings, stab links, struts & mounts, I have solid engine and trans and top mounts, new inner and outer tie rods, all wheel bearings, etc.... (not for this issue, just for performance/wear).
I am torn between thinking it is a cv axle or internal drive train noise.
Ford - Explorer :: Vehicle Takes A While To Engage In Reverse With A Loud Clunk
I have a Ford Explorer that my mechanic says needs a new trany. The vehicle takes a while to engage in reverse and does so with a loud clunk. Otherwise it runs good. I have 198K mi. It's an "02 4wd. Their asking $2,100 for the rebuilt trans. Wondering if it's worth it? May have reached the end of the line on this vehicle?
View 1 RepliesToyota - Dolphin :: 1977 - Loud Clunk When Shifting Into Reverse Gear
Sometimes when putting the vehicle into first it's almost impossible to get it to go into gear. Sometimes it's super smooth. Also when putting into reverse we hear a loud clunk. That one is most of the time but sometimes it goes in smooth. I was doing some looking around at the pedals because I think I am going to have to replace my master cylinder and noticed that on the inside of the vehicle where the clutch master cylinder comes into the vehicle it's leaking black fluid. Does that automatically mean my clutch master cylinder needs to be changed? Could this be the cause of it being difficult to shift because the clutch isn't fully disengaging?
View 11 RepliesCamry :: Creaking Noise When Press And Depress / Gas Pedal Is Sticky
Ok so I had this creaking noise at first when I press n depress the gas pedal (how normal driving should be) and I sprayed some WD40 and now the noise is gone, but it becomes kind of sticky when pressing and depressing.
It's like when u rub ur finger on a glass window back and forth, there is time when it catches ur finger (sticks) before u can move it the opposite way, it's not smooth as it used to be (my other camrys are smooth).
When pressing a little, then a little more, it has that sticky feel, same thing when depressing the pedal. That's the best I can explain it and it is really noticeable when I'm stuck in traffic.
Do u think I have a bad pedal or some white lithium grease will take care of this?
Prius (2010-12) :: Swoosh Noise When Press The Brake Pedal
I am looking to buy a 2012 Prius and I test drove it. Everything seems ok except each time I press the brake pedal there is a swoosh noise its as if air is being released from somewhere and I can easily hear it. Is this normal? the car is 95000 km on it. The dealer says it might be a normal hybrid noise. I currently have a 2007 Prius but that does not make this noise.
View 5 RepliesDodge - Ram1500 :: 2005 - Squeaking Noise When Press Down On Gas Pedal And Accelerate
Truck is a 2005 Dodge Ram 1500 Quad Cab, 2 wheel drive, automatic transmission. When I press down on the gas pedal and accelerate, an audible squeaking noise is made in the rear of the truck. It sounds like it is coming from somewhere near the rear axle or wheels. The sound is a high pitched metallic squeak, as if metal parts are rubbing against each other. The noise only occurs when I am accelerating. While accelerating, if i momentarily take my foot off the gas pedal, the noise stops. Also, once a constant steady speed has been reached the noise stops. Also, the truck makes the same noise when accelerating in reverse.
View 5 RepliesToyota - Rav4 :: Loud Noise From Rear Of Car When Press On The Accelerator?
I have a 2006 Rav4 and every time I drive my car after it's been sitting for a while there is a very loud noise coming from the rear of the car, the noise usually lasts about 10 to 20 seconds and only happens when I press on the accelerator, and is always when I go forward, never in reverse. The noise is usually louder when it is humid or it is raining.
View 1 Replies