Ford - Explorer :: 2002 - Loud Clunk Noise When Put It In Reverse
2002 ford explorer 4x4 150k miles when i put it in reverse a loud clunk noise but when put in drive no clunk noise. But on highway when its shifts a very loud clunk and like a real hard shift !!!!!o/d light is flashing also .transmission shift solenoid ? rear ?
View 8 RepliesFord - Explorer :: Vehicle Takes A While To Engage In Reverse With A Loud Clunk
I have a Ford Explorer that my mechanic says needs a new trany. The vehicle takes a while to engage in reverse and does so with a loud clunk. Otherwise it runs good. I have 198K mi. It's an "02 4wd. Their asking $2,100 for the rebuilt trans. Wondering if it's worth it? May have reached the end of the line on this vehicle?
View 1 RepliesExplorer :: 96 Ford XLT Truck Will Shift Into Reverse Only
I Have a 1996 Ford Explorer XLT my problem is my truck will shift into reverse but nothing else. Whats wrong with my truck and how do I fix it...
View 3 RepliesFord - Explorer :: 1999 - Loud Clunk / Thump Noise - Shifts Into Drive And Revs But Won't Move?
My boyfriend bought a 1999 ford explorer, he put about 2,000 miles on it in four months... I believe it now has roughly 110,000... Now the other day, he was pulling out and shifted from reverse to drive, we heard like a loud clunk/thump noise... It shifts into drive, and revs but won't move, it feels like neutral... If you shift to second, first, or reverse it's fine... Tranny fluid is good... O/D is always engaged...
View 3 RepliesFord Super Duty (1999-2016) :: 2004 F350 - Loud Clunk Noise In Forward Or Reverse Hi Or Lo When Accelerate
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 RepliesFord Transmission :: Loud Grinding Noise When Put Truck In Reverse
Chasing down a grinding noise. I have done a lot of research but nothing quit matches up with what I am hearing.
I have a 1979 F250 4x4. A few days ago I put the truck in reverse and as I was backing up it was like the drivetrain locked up. After that I put the truck in gear and started on my way. As I got up in speed a pretty loud grinding noise was coming from the tranny. 2nd and 3rd gear aren't bad but when I get up to 40+mph it sounds like crap. If I push in the clutch the grinding is still there. While driving I also put the transfer case in neutral, kept the tranny in gear, pushed in the clutch and the grinding stopped.
I also took the lid off, inspected the forks and thoroughly cleaned the inside but noise still continues.
Grand Prix :: 2004 - Loud Clunk While Having The Car In Reverse And Power Braking It
In my 2004 Comp G I have an extremely loud clunk when braking. The braking clunk does not happen all the time. There is a clunk while having the car in reverse and power braking it. While holding down the brake and revving hard and fast it make the loud clunk every time. It will not do it all the time in drive though. I can not pin point which side it is coming from. It sounds as if it is mostly the right. It almost sounds as if it is coming from inside the trans near the pan area?
I have replaced the lower control arms, sway bar bushings, stab links, struts & mounts, I have solid engine and trans and top mounts, new inner and outer tie rods, all wheel bearings, etc.... (not for this issue, just for performance/wear).
I am torn between thinking it is a cv axle or internal drive train noise.
Toyota - Dolphin :: 1977 - Loud Clunk When Shifting Into Reverse Gear
Sometimes when putting the vehicle into first it's almost impossible to get it to go into gear. Sometimes it's super smooth. Also when putting into reverse we hear a loud clunk. That one is most of the time but sometimes it goes in smooth. I was doing some looking around at the pedals because I think I am going to have to replace my master cylinder and noticed that on the inside of the vehicle where the clutch master cylinder comes into the vehicle it's leaking black fluid. Does that automatically mean my clutch master cylinder needs to be changed? Could this be the cause of it being difficult to shift because the clutch isn't fully disengaging?
View 11 RepliesVolvo :: Loud Clunk Noise In Reverse - Roll Back When Press The Pedal
When I put my car (04 s60 2.5t) in reverse it hesitate, then when I press the pedal it roll back with a loud clunk noise. But if I put the car in drive before putting it in reverse everything goes smoothly.
View 2 RepliesFord - F250 :: Loud Whining Sound / Truck Refused To Go On When Shifted From Drive To Reverse
I am not the sharpest tool in the box. I was driving my 1979 f250 with a full load of fire wood going about 45mph when I shifted it from drive to reverse (I thought I was in 1st) the truck mad a loud whining sound then refused to go on. Now when I shift it in gear it feels like it wants to move and if I revved up high it will rock back and forth. A friend jacked up the rear end with the wheels off the ground the tiers spun in all gears including park and I was told they could stop the wheels by hand with the car in drive. He then took the cover off the rear end and found it to be low on fluid but no signs of damage. What I broke?
View 9 RepliesFord Excursion :: 2003 - Noticeable Clunk / Won't Go Into Reverse
On my 2003 6.0l Excursion, the 5R110 is having some issues with reverse lately. Sometimes when you put it in reverse it doesn't actually engage. The only way to make it "fall" into gear is by giving it a little fuel, which then sends it into reverse. Now here me out, I'm not hitting 3,000rpms when I do this, just a light raise in rpms will get it in gear. Solenoid issue, possibly?
I haven't noticed if it does this when it won't go into reverse or if it does it no matter what, but it will make a light clunk when going forward after using reverse. A very light, but noticeable clunk. Is this most likely a U-Joint related issue? Got under it and moved the driveshaft around, didn't notice any play at all, but perhaps I wasn't checking properly (wiggling it left and right).
Excursion is RWD (2WD) and has right around 183k miles on it, acquired in October with 172k miles, so not positive on previous history of the transmission. Also I know my gear selector mount is broke, so it cluster is off, but I certainly don't think that, in of itself, is the cause of my issues. Maybe I'm wrong?
Ford - Explorer :: 2002 - Truck Having Hard Time Going Into Reverse Intermittently / Trans Slip In Normal Driving
He has a 2002 Explorer 4.6. The truck is having a hard time going into reverse intermittently, hard shift in normal driving and thinks it has slipped in first gear going up his driveway that is steep. He is worried that he put slightly over sized tires and this may hurt his tranny. The overdrive has blinked twice with in the year. Possible problems that could create this he is thinking solenoid pack, servos, torque converter. The truck has 110k and never done fluids, Would lucas slip fix or hurt we have heard that these tranny's are finicy.
View 1 RepliesFord F-150 - 1997-2003 :: Clunk From Rear Of Truck On Braking
I've spent several hours over the course of the last week trying to figure out the problem I am having with my 1999 F150. When coming to a stop, there is a heard and felt "clunk" coming from the rear end of my truck. The other day, I had to brake to a stop rapidly and it felt like something had dropped out of the back end of my truck. It's 4WD with a 5.4L V8 with 240k miles. I have a fair amount of knowledge of the truck, having performed all maintenance and most repair, so if I need to check something and report back I should be able to. Also, I've owned the truck since it was new, and this is a recent development.
View 10 RepliesFord - Explorer :: 2003 - Clunk In Rear When Hard Accelerating Or Stopping
I had heard clunking when hard accelerating or hard stopping my 2003 Explorer, also heard it from Park to Reverse/Drive. I suspected u-joints, was correct, those were replaced.
After I received my car back I noticed the clunk was louder when hard accelerating or hard stopping; again from Park to Reverse/Drive. I suspected rear differential. I called my mechanic who said they noticed some play in the rear end - a little loose, that the noise would be noticeable...but that if it were him he wouldn't worry about it. He said the drive shaft was tight, that I wasn't in danger of it falling out, etc.
These are the only symptoms I have that something is wrong with the SUV. Just that clunk. If I come off slow from a stop and not hit the gas, there is no clunk. If I do not hard stop, again I can avoid the clunk. The vehicle does not vibrate or make noise on the freeway, shifts well between gears.
I was going to have my mechanic open the rear end up and see what needed to be replaced when the cold weather brakes. In the meantime, is there anything I need to be keeping an eye on, or something else I should check? My mechanic said the checked it over and couldn't find any other problems. I just want to be prepared for expenses.
It's a 2W, not 4WD. I had all the fluids done, a drain and refill on rear. Not sure if that's important to know or not.
Ford - Explorer :: 2003 XLT - Clunk Coming From Transfer Case When Driving In 4WD
I am completely stumped. 4.0 SOHC 145k miles.
There is a clunk that is coming from the transfer case (at least thats what it sounds like) when im driving in A4wd. When i transfer it over to 4HI, the clunking goes away. The clunk happens on acceleration AND deceleration. I have replaced wheel hubs, upper control arms, stabilizer end links....
Checked every other piece of rubber or bushing or connection or CV joint under that thing and can not figure it out.
Also, I just replaced the transfer case control motor and the clunk is still there. Its worth noting that I am able to switch between A4wd, 4HI, and 4LO with no problems at all. I am getting ready to drive this thing into the river.....
Ford F-150 - 1997-2003 :: 2002 - Loud Clunk While Shifting - Floor Vibrates When Foot Off From Gas?
I have an 02 f150 ext cab fx4 with just under 140,000 miles my first problem was when I shift from reverse to drive I have a loud clunk/bang I was trying to find out what was wrong so my brother in law was looking out the drive shaft he pushed it into the rear end now when I am over 65mph and take my foot off the gas I have a vibration but only when I take my foot off the gas and above 60-65mph the steering wheel or peddles don't vibrate but the floor does .
View 3 RepliesFord F-150 - 1997-2003 :: Loud Popping Noise Almost A Clunk When Making A Slow Sharp Turn
Lariat stepside, 5.4L with 150k miles. Loud popping noise, almost a clunk, when making a slow sharp turn. Put it on jackstands and did the normal tire grab and shake and found no issues there. Tie rods, ball joints and sway bar links all seem tight. Looked for signs of unusual rubber to metal and metal to metal wear and found nothing. The only thing I did see was the rubber boots on the upper control arm ball joints were split. What I have checked or if I am missing something?
View 9 RepliesFord 7.3L Power Stroke (1999-2003) :: 2000 - Humming Sound While Driving / Clunk Loudly When Shifted Into Reverse
On my way home from work the other day my 2000 7.3l started making a humming sound while driving. I noticed that it was shifting harder and it began to slam into gear when I would take off from a stop. By the time I pulled into the driveway I had to be half way into the pedal to keep it moving. I shifted into reverse and it clunked loudly and didn't want to back up. I don't know much about transmissions but I'm thinking that it's probably shot. I'm hoping that it's something other than a complete rebuild but doubtful.
View 6 RepliesFord F-150 - 1997-2003 :: Truck Will Go In Reverse But Will Not Go In To Drive
I have a buddy that has a 1998 f150 4x4 with 4.6l and 332836 km on it. It will go in to reverse but will not go in to drive at all. Is his transmission shot? Or is there anyway to test it to find out what the problem is.
View 4 Replies