Sienna :: 2004 - Grinding Sound While Coasting From Passenger Front Wheel
2004 Sienna LE with 193,500 miles. While driving home tonight I started hearing a grinding noise from the passenger front wheel. The noise goes away on acceleration and braking. Whenever I take my foot off the gas it starts to make the noise again. It sounds almost like a brake noise but I just replaced the caliper bracket this past weekend and the brakes look great (less than 20,000 miles on caliper, rotor and pads). I suspect a bearing may be going bad and want to know if these symptoms match a bad bearing. The wheel bearings are all original.
View 4 RepliesElantra MD (2010-15) :: Loud Rubbing / Grinding Sound From Front Wheel Area While Turning
Early this week my car started making a loud knocking/rubbing sound (Kind of in between when your brakes are ground down to the rotor and a knocking pattern).
FIRST, it started only when I turned slightly left or left.... NOW, it's doing it as I go straight and when I turn to the right as well... oddly enough it's not as bad when going left anymore...
What this could be?? And if it's an easy DIY fix..... (maybe a link on how) and how much the part(s) might be?? I've taken video (for sound as I drive)...but not sure if I can upload it (size limit).
TrailBlazer :: Grinding Noise Coming From Front Left Wheel When Braking In Reverse
So whenever I brake while reversing (and rarely while moving forwards) I hear this odd grinding noise coming from the front left wheel and can feel it through the brake. Im not a petrol head but I decided to replace a wheel bearing hub myself recently to save money. I am pretty sure I reconnected the anti lock brakes correctly though I doubt it's that. My brakes are good.
View 4 RepliesToyota - Sienna :: 2008 - Slight Grinding Or Rubbing Sound When Braking
I have an 08 Toyota Sienna and yesterday I started to notice a very slight grinding or rubbing sound when I apply the brakes coming from the passenger side front wheel. I can only hear the grinding or rubbing sound when I am going very slowly (like the last 20 feet when approaching a stop sign). The sound pulses slightly like two surfaces that are not parallel are rubbing. There is no pulsation or wobble felt in the brake pedal. I'm thinking it's time to get the rotors turned, but it could also be the brake pads.
View 5 RepliesFord - F150 :: 2003 - Grabbing / Grinding - Metal Rubbing Sound And Shakes In Braking
I have 2003 F150 SuperCrew 5.4L XLT. For past month or so, have been hearing metal rubbing sound and had shakes in braking - as well as a "grabbing and pulling" sound near brake pedal - very aggravating to say the least. Weird thing is the grabbing and pulling sound only happens under 10 miles an hour or coming to a complete stop. (The grabbing sort of sounds like the sound the ABS makes when hit really hard)
Yesterday I had brakes and rotors replaced - mechanic said front rotors were beyond turning - very bad. 135,000 miles on truck. Felt more comfortable until I pulled out of shop and when I applied brakes, had the same grabbing/grinding sound, but no pulling. Went back to mechanic and had him ride with me to hear sound, and he is stumped.
Knew it was safe(r) to drive since new pads/rotors installed, but when I got up to 55mph and barely touched the brakes, the steering wheel began to shake violently - but no sound/grabbing from brake pedal area like I get when I am 10mph or under. Really at a loss right now.. What's going on?
Truck is a 2WD, also hear some thump thump thump sounds from front left tire, which are only one year old, but tire man said that was from suspension arm or something - nothing to worry about he says.
Some people have said "bearing" or "hub" but when brakes were replaced, the bearings were repacked...is this the same thing? Is the current problem safe to drive with? I do not take vehicle out of the county - just to work and back and hunting on weekends.
Bmw :: Rubbing / Grinding Noise From Rear Right Wheel
I just recently I have been experiencing a rubbing/grinding noise from the rear right wheel, also it has made a clonking noise like a flat tyre but it isn't, I can hear the noise from about 25/30 mph when I go faster or slower i cant hear the noise.
View 2 RepliesSonata NF (2006-10) :: Calipers Changed Now Rubbing Noise When Braking
I discovered a few weeks ago that my 2009 Sonata 2.4L SE had a sticking caliper on the rear driver's side. It had gone bad on the passenger side as well, but not as bad. I had the calipers, rotors, and pads replaced on the rear yesterday. As soon as that was done, I started hearing a noise when braking that sounded like a rubbing noise, almost like a long "sigh." It happened at any speed as long as I pressed the pedal far enough to bring the vehicle almost to a complete stop.
I originally thought the calipers weren't the right fit, but the parts I confirmed the parts I ordered (Nastra) through Rock Auto were correct. I've driven about 80 miles since then and nothing has changed. I didn't see anything wrong when I took the tire off, but I don't think this sound is normal. Taking it in to the mechanic tomorrow. Could it be a wheel bearing? Wrong parts?
Ford Super Duty (1999-2016) :: Intermittent Grinding / Rubbing Sound Coming From The Wheel
I have a 2000 F-250 Crew Cab with Lariate Trim package (not sure how that could be relevant to the issue, but it might be?) and auto locking Hubs. Recently, the truck has taken to making an intermittent grinding/Rubbing sound that comes seems to come from the wheels. I can not locate the sound exactly since it only happens when I'm Driving, I have never heard the sound at any speed lower than 20 mph or when the 4x4 is engaged either manually through he hubs or the selector in the cab when the hubs are in auto. All this leads me to think that I need to replace the autolocking hubs, but i'd like a second opinion (or even third) before I go to the trouble of replacing them.
View 1 RepliesSaab - 9-3 :: 2000 - Squeak Coming From Front Right Wheel Well After Driving About 20 Miles
I just bought my first car, a 2000 saab 9-3 convertible (base model) a month or so ago. The car had been neglected for the last year or so and I have been spending the last few weeks fixing all its issues. This last weekend I replaced the rear shocks, font struts and the rotors and brake pads on all four wheels. After driving about 20 miles or so I started to notice a squeak coming from the front right wheel well and since has become more and more noticeable/pronounced.
Squeak description:-cyclically increases and decreases in volume with each rotation of the wheel
-the squeak is constant: squeak that gets louder at a certain point in each wheel rotation but is always a certain baseline volume as long as the wheel is turning
-the volume of the squeak is NOT AT ALL effected by braking (EXACT same noise driving as while braking) which leads me to think its has nothing to do with the pads or rotors
-HERE IS THE WEIRD ONE: the squeak disappears completely when driving in reverse!
-the squeak is about the pitch and sound of a cricket, only constant and Ii guess louder.
-the noise is unaffected by turning sharply to the right and left.
Additional details:- I had to use a gear puller to press the axle out of the wheel bearing (was stuck from rust). I hooked to the back of the wheel bearing ( what the lug nuts screw into ) and pressed on the center of the axle. Maybe this could have damaged it or the cv joint?-while I was switching that wheel's strut insert out, the carrier bearing leaked 1 (maybe 1 and a half) teaspoons of grey oil from the larger end of its boot and stretched out an inch or so from the weight of the hanging axle.
Ford F-150 (2004-2008) :: 2006 - Grinding Or Whirring Noise Coming From Front Passenger Side Wheel
I owned a 99 f250 a little while ago. Just bought a 2006 crewcab F150 xlt about 2 months ago, and for the past month there has been this unusual grinding or whirring like noise coming from the front passenger side wheel.
I took it to the mechanic and he found a bad wheel bearing on drivers side and replaced it but that wasn't the issue. He could hear the noise but wasn't able to figure out what the actual issue was.
The noise only happens when my foot is on the throttle. (not when coasting) and i also just discovered that it doesn't make any noise at all when put in 4x4.
Lexus LS 2007+ :: Grinding Noise When Braking While Cold
I just had new pads(ceramics, not sure of the brand) all around and new front rotors installed from a local shop that I trust. When braking while cold, there is a grinding sound and feel, I took the car back to the shop, they've acknowledged the issue, double checked their work, and are willing to replace the pads if it continues, which it has. Is there a break in period for ceramics, should I specify a different type of pad.
View 2 RepliesSonata NF (2006-10) :: Rubbing / Grinding During Deceleration At Low Speed
2006 Sonata GLS V6, 105K miles
I have a weird rubbing/grinding noise that seems to be coming from the front, passenger side of my car. It's a very weird rubbing/grinding noise, almost rubber like, but somewhat metallic. I recently got new tires and almost thought it had something to do with that, but that seems unlikely.
When decelerating from about 20 to 15 mph, the noise starts. It's a cyclic noise that is proportional to the speed of the car. It occurs while going in a straight line or while turning, but gets significantly louder in a turn. It instantly stops as soon as I hit the accelerator at any point.
Another important fact is that the noise does not happen when the car is cold. You have to drive about 5-10 minutes for it to start.
I just bought new KYB shocks/struts that I planned to install (probably not myself although I am tempted), so now is probably a good time to dig into the problem. I replaced brake pads and turned the rotors within the last year. I wouldn't be surprised if the suspension needs some additional TLC as I have not replaced any components and have owned it since it had 13K on the odometer.
Santa Fe (DM - 2013+) :: Rubbing / Faint Grinding Sound Emanating From Right Front Corner
A few days ago I purchased a brand-new 2015 Santa Fe Sport 2.0T LTD, with about 80 miles on the odometer. During the test-drive, I noticed a rubbing/faint grinding sound which emanated from the right front corner, and only lasted a second or two. I was driving straight ahead at about 30mph on a relatively smooth paved road at the time.
The dealer told me they were aware of the noise, and claimed a small stone was to blame. (it had been test driven a number of times). I was assured that the problem would be fixed when I picked up the car.
On the drive home from the purchase, it did it again, and has done it every day that I've driven it. (about 150 miles on it now). Are these wheels susceptible to having stones lodged in them?? (assuming that's actually what's causing the noise).
Ford F-150 (2004-2008) :: While Turning Makes Rubbing / Grinding Noise From Front?
I've got a new issue that is happening on the front end of my truck. Whenever I try turning my wheel while driving, I get this rubbing/grinding noise coming from the front of my truck. It only happens when the wheels are in motion. It seems to happen less when I'm driving at higher speeds, but I can notice it make the sound at any speed. I tried driving it slowly in an empty parking lot while turning and it's definitely making the sound every time the tires rotate.
I took it in for an alignment because this was happening every time I drove, whether it be driving straight or making a turn. Now that my alignment has been fixed, it no longer make this noise if I am driving in a straight line, so it only seems to happen when I'm turning. I had the mechanic check to see if they could reproduce the issue. The mechanic was able to hear what I hear, but when he put it on the lift at the shop, he was not able to reproduce the sound.
Elantra MD (2010-15) :: 2013 - Rubbing Type Noise In Driver Side Front When Braking And Turning Right
I have a 2013 Elantra. There is a rubbing type noise in the driver front when braking and turning right. It only rubs(catches) in one spot. Almost like a pulsation, however doesn't pulsate. Hard to describe. Has a new wheel bearing. There are new pads and rotors (two sets of rotors). Took to my Hyundai dealer today. They can't find anything visible. They said only option is to start adjusting/replacing parts as trial and error.
View 3 RepliesFord - Taurus :: 2003 - Front End Grinding When Braking
i have an 03 ford taurus. recently i noticed a grinding sound when braking. My first thought was that i needed new brakes. I want to the mechanic, they did a courtesy inspection and found nothing wrong with them! the rotors are smooth with no grooves, the pads look almost brand new! the mechanic seemed baffled. when i bought the car the brakes that are on now. it's just recently that i have noticed the grinding sound. The mechanic ruled out other possible problems such as bad bearings and shocks...etc.. What could be the problem?
View 2 RepliesGMC - Sierra :: Rubbing Noise That Seems To Come From Front Passenger Wheel
Concerning my recently purchased '99 GMC Sierra 1500 2wd 4.8L...
There is a seemingly undiagnosable, not that noticeable, rubbing noise that seems to come from the front passenger wheel - one rub for every revolution of the wheel. It is fairly subtle and can be felt (subtle) in the steering wheel between 30mph and 45mph. I don't think a lot of people would notice it and anyone that did would probably just turn up the radio at this point. After all, this truck has a very solid drive train and runs amazingly smooth for its age and mileage (172K)
Here are the repairs I have made that you might be about to suggest:- New front bearing/ hub assemblies on both sides within the last year. No play in any of the wheels.- New tires from Firestone within last month.- New tie rod ends and alignment. - New rotors, pads, and flex lines on front. Refurbished caliper on passenger side front.- New pads, calipers, and flex lines on rear. (one of the calipers had seized and I thought I had finally found the problem... not.) (one of the flex lines was the wrong part and was rubbing up against the rim... I thought that was the problem... not.)
Here are the things you are about to suggest I check:- Transmission, rear axle bearings, etc checked out by my trusted transmission shop. - Wheel well shields are firmly attached.
Things I haven't yet fixed : tail pipe bracket, evap emission solenoid assembly, blower fan resistor thingy, crappy door latch.
Cavalier :: Repetitive Rubbing Sound At Front Wheel
I have this repetitive rubbing sound coming from the driver's side front wheel. It increases as I go faster and slower as the car goes slower. When I apply the brakes the sound disappears. It usually isn't audible when first driving but will show up after a few minutes. If I'm turning slightly to the left it will go away, or if I make a right turn I will occasionally get a rattling noise that's distinctly different.
I had this looked at a while ago, before the rattling noise appeared, and they determined it was a motor mount and replaced that. The noise did not go away.
I've taken a look at it and do not see anything obvious. Brake pads are still good, rotor is smooth and not visibly warped (though it has more rust on it than I'd like). I tried moving the tire to see if the bearings were shot but didn't have any luck (I'm not ruling it out yet).
Lexus GS 2006-11 :: Rubbing Noise Front The Front Of The Vehicle
I am on my 4th lexus; GS2010 (I currently own). I was driving off (very slow speed) from the dealership I noticed a rubbing/scrubbing noise front the front of the vehicle. The next day I started the car and backed out of my garage, put on brakes, turned the steering wheel to the far right and pressed slightly on the accelerator and I heard another noise; sounded like CV Joints going bad. So I contacted the dealer and they told me to bring the vehicle over. The noise was heard and they applied grease to something (cant remember what).
The next morning the noise was back; be mindful the noise is intermittent but mostly after the car has sat and never when the brake is applied. So I contacted Lexus and let them know the problem.
Finally I returned to Lexus, by appointment, and test drove with the lead service tech. The tech identified the noise several times during the drive; hard turns recreated the issue. Lexus contacted me and stated that they had welded something and that should ahve fixed the problem.
However the next day same problem; so I contacted Lexus again. When I returned from a business trip I returned the vehicle. On 5/23 I received a call stating that the tech could not duplicate the noise and if I could come and ride (again). So I left work and went. As soon as we got in the car (tech driving), he put the car in drive and made a sharp left turn (click, click, click); and the scrubbing noise got worse. Now instead of scrubbing on left or right hand turn, now its scrubbing going forward. So I asked why couldn't he do that without me. I had left "specific" notes as to when it happens, keep the windows rolled up, of course don't turn on radio and drive normal. So I left the car.
On 5/30 they had the vehicle fixed (yeah right); they adjusted the rear backing plate. Ok so you had my car 1 week, total time about 2+ weeks and the noise was coming from the backing plates ( I said this to myself). As usual the noise came back and I contacted Lexus. I brought the car back in on 6/13/14 and they replaced the right axle. My thoughts, if you are hearing it from both sides why wouldn't you replace both sides (??). Ok took the car home and again before I left the lexus lot, the noise was back. So I called the dealership right away. I did not turn around, I went home to pack for another business trip. Also if i would have turned around I probably would have given them a piece of my mind and that would not have been good for the situation. I was feed up so upon arrival from my business trip I scheduled an appointment with another lexus dealership; same owner but another location.
I take the car in and they call back the following week and say it was the front right caliper and it was replaced; however he stated that he didn't hear the clicking noise. I pick the car up on July 22, and by July 23, I was taking the car back. The rubbing noise they claim came from the tires and they couldn't duplicate the clicking noise. On July 29, they called me in to ride with the tech; be mindful I still have a loaner. They took me to the repair department and my car was on a lift and they dropped it down. The tech asked if I wanted to drive and I told him he could drive. I also pointed at the car that was on the lift directly beside mine and stated that by the time we get to that car you will hear the noise. he heard the noise.
On July 30, they figured out the problem and told me that they had good and bad news. The good news was they found the problem and the bad news is they can't fix it. It is a typical noise for that vehicle and it comes from the brake actuators. So I went to pick my vehicle up on next day and I asked if they bleed/flushed the brakes and he said No; and then I asked him if he replaced the actuators and he said No. So lets recount the events, You have had my car for 2 weeks with specific directions and couldn't duplicate the noise.
I come and ride with the tech and magically the noise is replicated within seconds and magically you know the problem; however you dont give me any explanation and nothing was done to confirm. That let me know they googled and came to this site and by this brake actuator issue being ongoing with no resolution they blame it on it. However the problem is that the noise is not made when braking, its made when the wheel is turned and the accelerator is inclined.