Touareg :: Got Communication Errors While Connecting To Module 9?
When I try to connect to module 9 via vag-com to add DRL and TPS to my menu I keep getting the error on my laptop. How can I fix this? Also how do I remove the acceptance screen from an '06 DVD NAV?
View 4 RepliesPhaeton :: New Key Adaptation Using VCDS?
My first key is damaged and than it stopped to working. Now i am using my second car key (spare one). Thus i decide to buy the new key as a spare from Germany. It is original and came to me according to VIN number. How to make adaptation for the new key using VCDS (Vag-Com)?
View 3 RepliesPhaeton :: 2007 - VCDS Codes Detected
I tested my new VCDS today a HEX-USB+CAN. I got CAN: Not Ready. But that's impossible.
My guess is that the OBD2 interface I got is faulty.
Golf/GTI VII :: VCDS Codes / Turning Traction Control, ESP Off
I'm looking for tricks that I could do changing the codes in my golf like turning traction control off and ESP off.
2015 Golf 1.8 TSI
Golf IV / Jetta IV :: 1.8T VCDS Measuring Blocks For Boost / MAP?
Recently got my VCDS USB cable that I can use on the newer 1.8T Jettas and I haven't found a measuring block for boost or MAP data. My Scan Gauges don't give a MAP data field either for the 1.8T engine, while it does for the TDIs.
Where do I find this data? Surely the ECU monitors boost?
Couldn't find anything while hooked up to the Buddys Passat 1.8 that we did a TB and thermostat on yesterday.
Golf/GTI VII :: How To Disable Check Headlight Message With VCDs
I got the bec autoparts gti reps from Ed. I know HID's aren't perfect so sometimes they don't turn on but just turning the headlights off and then works to have them turn on. Whatever no big deal, but, every time it happens I get a check low beam headlight message that won't go away until I disconnect the battery terminal. So what I'm asking any trick with vcds to disable these messages. Idc to not have that caution. I just can't read German and don't know how to maneuver vcds.
View 1 RepliesGolf IV / Jetta IV :: Stalls And Shut Off While Connecting To VCDS
So I am having this weird electrical issue when connecting VCDS. Every time VCDS begins to scan, the door seems to receive an unlock command and then the car will stall and shut off. I have tried doing different things but no luck. Possibly a bad ground somewhere? Also, when the car stalls out, VCDS then picks up a few codes. I can clear the codes just fine but every time this happens, the codes return. Here are the VCDS codes:
Address 01: Engine
Labels: 06A-906-018-AEG.lbl
Control Module Part Number: 06A 906 018 J
Component and/or Version: MOTRONIC M5.9.2 AT V06
Software Coding: 00001
Work Shop Code: WSC 00066
VCID: 2959A211D3043F762A-4AE4
8 Faults Found:
17633 - Fuel Injector for Cylinder 1 (N30)
P1225 - 35-00 - Short to Ground
17634 - Fuel Injector for Cylinder 2 (N31)
P1226 - 35-00 - Short to Ground
17635 - Fuel Injector for Cylinder 3 (N32)
P1227 - 35-00 - Short to Ground
17636 - Fuel Injector for Cylinder 4 (N33)
P1228 - 35-00 - Short to Ground
17859 - Secondary Air Injection System
P1451 - 35-00 - Short to Ground
17829 - Secondary Air Injection Solenoid Valve (N112)
P1421 - 35-00 - Short to Ground
17833 - EVAP Purge Valve (N80)
P1425 - 35-00 - Short to Ground
17880 - EVAP Leak Detection Pump
P1472 - 35-00 - Short to Ground
It seems that only the engine controller is being affected. Assuming that the car doors run under the same controller?
Golf IV / Jetta IV :: MK4 Cranked Fine But Would Not Start - VCDS Code
I just bought a 2002 Jetta 2.0L with automatic trans and about 98000 miles on the odometer.It drove fine on a short test drive. It drove fine on a 45 min drive home after which I parked it for a short while (about an 60-90 mins.) Then I tried to restart it . It cranked fine but would not start. After 3 or 4 attempts I let it rest for a min and then it started. And the CEL came on.
This was a few days ago. Today I finally got a chance to scan it with these results:
VCDS Version: Release 15.7.3 Running on Windows 7 x86
[URL] .....
Address 01: Engine Labels: 06A-906-032-AVH.lbl
Control Module Part Number: 06A 906 032 FR
Component and/or Version: 2.0l R4/2V G 4070
Software Coding: 00003
[Code] ....
I'm new to MK4's and I'm at a bit of a loss as to where to start. It looks to me like there's a problem with both the fuel pump relay and the crank sensor. But what to make of all the short to ground codes. Could they be caused by a bad fuel pump relay?
Golf V R32 :: Intermittent Signal Errors
Mine Door controller started out minor - randomly it would try to roll up the window multiple times when it was already closed, and I'd get "intermittent signal" errors from vagcom. I told the dealer about this, and they didn't want to fix it, and they tried to blame my C2 ECU flash for the door controller problem, possibly because there wasn't anything obvious wrong with it other than the VCDS errors.
Now it has decided to wig out totally - when I open the driver's door, a good 50-70% of the time the car thinks the door isn't open. The MFD doesn't light up, dome light stays off, fuel pump doesn't prime. Open the passenger door and the MFD does display and dome light turns on, but the driver's door will still show "closed" even though it is standing wide open.
If I don't start the car quick enough and I have no passenger, it will re-lock (since it thinks nobody ever opened the door). Weirder still, if I pull the interior handle with the door open, it will usually light up the MFD and show the door open, but only briefly - when I let go of it the door shows closed again. However, sometimes after pulling it a few times it "fixes" and the MFD will show open correctly and the door is fine, for a while...
It has not yet gotten stuck in an "open" position, as that would mean I couldn't lock the car.
Golf/GTI VII :: SD Card(s) Not Readable - No Errors
2015 Golf TDI s model. When I try to use a SD card absolutely nothing happens. No errors, no reading, like I have put nothing in the SD card spot directly below the CD player in the glove box. On all the radio menus the SD card is dimmed as if nothing is in there. I have tried 4 different brands and sizes of SD cards, different formatting options, different files, still nothing. The iphone cable works fine, so does bluetooth and the CD player. No error codes either with VCDS. I have tried complete resets of everything but no luck.
View 9 RepliesPrius (2004-09) :: ABS / VSC And Exclamation Dashboard Errors Came On
I was recently driving along the highway when I hit a small dip in the road (nothing serious, i drive over this everyday) and all three of the lights mentioned in the subject line came on. Nothing physical otherwise was noticed, as far as I could tell the car drove and has driven the same since.
View 5 RepliesPrius (2004-09) :: A/C Stopped Working - HV And ECU Errors
Today I was driving to my office and suddenly my a/c stopped cooling. I reached my office nd parked the car. 5 hrs later I got the car from parking and everything worked fine. Again about the same distance a/c stopped cooling. And 2 mints later, following signs came on and I have taken the pictures. I am wondering what is about? Love prius but don't know japanese.
View 14 RepliesGolf IV / Jetta IV :: 2.0 Engine Is Sputtering And Rough Running On Morning Start - No VCDS Fault Codes
I have a 2008 MK4 2.0 with only 53,000kms. At 40,000Kms I put new OEM spark plugs.
Just recently, every morning when I start the engine is sputtering and rough running. The engines want to die but I give a little gas, and run rough like it is only firing on two or three cylinders.
When it gets to the normal operating coolant temperature it runs without any problem and I can use the AC. Its only give me this problem on the first start of the day.
Does not have any MIL light on the instrument panel. I scan it with VCDS-Lite and do not found any fault codes. The only thing that's come to my mind is to change the Green Coolant Sensor.
Golf VI R :: Rough Idle - Some Random Fueling Errors
A few days ago I noticed a very rough idle first start of the day, this happened twice, then on my way to a show this morning, I lost most power for about 15 miles, boost would not go above 0hg, all the sudden on the highway,BOOM, back to normal...during all of this no engine light or CELS were displayed. Scanned the car later in the day and the only thing that showed up were some random fueling errors, cleaned the codes from the memory and so far so good all is fine!
View 18 RepliesPassat (B7) :: TPMS Errors After 1000 Miles Of Driving
Got the TPMS light after ~1,000 miles of driving. Checked the pressure on all four and all read around 32psi. Pumped all up a few pounds, held the reset TPMS button in the glove box for 2 seconds with the ignition off. Now about a week later, I have the light on again and all 4 tires appear to be fine visually. What gives?
View 6 RepliesGolf IV / Jetta IV :: 2003 GLI (VR6) - P0016 / P0018 OBDII Errors
Replaced my Crankshaft position sensor and cleared my codes but I'm still getting a P0016 and P0018 error. Car runs fine at the moment. Can't smog and therefore register it till I figure it out. Next step is replacing the Camshaft position sensor.
View 3 RepliesPassat (B6) :: 2006 2.0T - Steering Column Errors / Battery Replaced?
My 2006 2.0T Passat is starting to give me the steering column errors. I've seen a couple people saying that the problem was rectified by a new battery. Seeing the car is out of warranty and this would be the 6th winter for the battery, I think it's probably good idea to try a new battery to see if it does the trick before going to the dealer. I've never changed a battery before, so what does it all involve? I have a 12V battery from my back up sump pump that I can use to keep the power up when I change the battery. I imagine that I'll just connect the back up battery to the leads, then disconnect the old battery, pull it out, put in the new battery, connect the leads to the new battery, and disconnect the back up battery. Does this sound reasonable? Is there a bolt(s) securing the battery in place that needs to be loosened before I can pull the old battery out of the bay?
View 4 RepliesGolf/GTI VII :: EPC And Engine Light - Frequent Front Blinker Errors
My 2015 GTI, Gas engine, Manual Transmission ... Blinkers consistently give me an error code advising me that I need to get the front left, front right, or both blinkers checked and do a rapid flash and make them inop. Turning my car off and restarting usually clears this (almost always on the first try).
Also, the following problem has happened 3 times at varying degrees of severity when the temp has been -30F or colder. I've started my car to warm up, when I've come back to my car after 10-20 minutes I've had 2 warning lights on. One is the little yellow eng light, which my manual says is "Engine control malfunction". And the other is "EPC" which my manual says is also "Engine Control Malfunction", but also governs it to 20mph. After many restarts, or letting the vehicle sit, both lights will come off (not at the same time). 2 of the times there has been a burning rubber smell. Currently it has a battery blanket and battery pad (pad added by my husband after the first time I had the -30 issues, as the battery was low) and an oil pan heater.
Passat (B6) :: Power Drops At 2100 RPM / No Errors When Reading The Chip
Got my brand new passat one month now: it's a 1.9 TDI, 105hp saloon. From day one I have been noticing power drops right at 2100 rpm, but not very frequently. The power drop is very very short in time, but strong (you can feel your head going forward goes you don't expect this). Today at 4000km (2485 miles), the power drops happen more frequently. Yesterday I had it 4 times in 125 miles.
- They're always right at 2100rpm, never lower, never higher.
- In any gear (had the problem in 2, 3, 4 and 5th gear).
- Always when keeping round the same speed, I never had a power drop when accelerating.
Problem is that I can not reproduce the problem myself, it sometimes just happens. The vw dealer doesn't find any issues when reading the cpu and doesn't notice it when test driving (test drives are to short).