Touareg :: MFT Message Check Headlight Range Control?

As the subject states, I got the MFT message: 'CHECK HEADLIGHT RANGE CONTROL'

Battery gauge = 14 solid

All other guages normal

View 4 Replies

Touareg :: Check Headlight Range Control Message On MFI

Received the MFI message "Check headlight range control"?

I have a 2004 V8 and the automatic leveling feature seems to be working correctly. If I stand in front of the vehicle, it appears that the headlights level themselves when the ignition is turned on.

I have noticed a couple times while driving at night that the headlights did not appear to be shinning down the road as far as they have been during other trips, so I'm thinking the problems could be related.

View 1 Replies

Touareg :: 2005 - Getting Error Message Check Headlight Range?

I have a 05 V8. I have had in it 3 times in the last month for a bad headlight which was finally fixed now this error message popped up yesterday.

By the right I will not be taking my VW back to the dealer...

View 5 Replies

Golf/GTI VI :: Check Medium Error Message In MDI

I recently performed the MDI update, and now whenever I connect something to the USB, I get a "Check Medium" error message.

View 10 Replies

Golf/GTI VII :: VCDS Codes / Turning Traction Control, ESP Off

I'm looking for tricks that I could do changing the codes in my golf like turning traction control off and ESP off.

2015 Golf 1.8 TSI

View 3 Replies

Golf IV / Jetta IV :: 1.8T VCDS Measuring Blocks For Boost / MAP?

Recently got my VCDS USB cable that I can use on the newer 1.8T Jettas and I haven't found a measuring block for boost or MAP data. My Scan Gauges don't give a MAP data field either for the 1.8T engine, while it does for the TDIs.

Where do I find this data? Surely the ECU monitors boost?

Couldn't find anything while hooked up to the Buddys Passat 1.8 that we did a TB and thermostat on yesterday.

View 2 Replies

Golf IV / Jetta IV :: Stalls And Shut Off While Connecting To VCDS

So I am having this weird electrical issue when connecting VCDS. Every time VCDS begins to scan, the door seems to receive an unlock command and then the car will stall and shut off. I have tried doing different things but no luck. Possibly a bad ground somewhere? Also, when the car stalls out, VCDS then picks up a few codes. I can clear the codes just fine but every time this happens, the codes return. Here are the VCDS codes:

Address 01: Engine
Labels: 06A-906-018-AEG.lbl
Control Module Part Number: 06A 906 018 J
Component and/or Version: MOTRONIC M5.9.2 AT V06
Software Coding: 00001
Work Shop Code: WSC 00066
VCID: 2959A211D3043F762A-4AE4

8 Faults Found:

17633 - Fuel Injector for Cylinder 1 (N30)

P1225 - 35-00 - Short to Ground

17634 - Fuel Injector for Cylinder 2 (N31)

P1226 - 35-00 - Short to Ground

17635 - Fuel Injector for Cylinder 3 (N32)

P1227 - 35-00 - Short to Ground

17636 - Fuel Injector for Cylinder 4 (N33)

P1228 - 35-00 - Short to Ground

17859 - Secondary Air Injection System

P1451 - 35-00 - Short to Ground

17829 - Secondary Air Injection Solenoid Valve (N112)

P1421 - 35-00 - Short to Ground

17833 - EVAP Purge Valve (N80)

P1425 - 35-00 - Short to Ground

17880 - EVAP Leak Detection Pump

P1472 - 35-00 - Short to Ground

It seems that only the engine controller is being affected. Assuming that the car doors run under the same controller?

View 1 Replies

Lexus LS 2007+ :: Can't Disable, PCS Not Available Now Message

New owner of previously owned 2008 LS600hL and it has the recurring "PCS not available now" dinging message and i want to disable it for now. Upon researching it i found that it should be under the steering wheel presumably next to the TPMS reset button but I am not seeing it. The location I was expecting it to be (to the left of the TPMS reset) actually has two wires going into what looks like a blank plastic cover plate but no button.

View 5 Replies

Golf IV / Jetta IV :: MK4 Cranked Fine But Would Not Start - VCDS Code

I just bought a 2002 Jetta 2.0L with automatic trans and about 98000 miles on the odometer.It drove fine on a short test drive. It drove fine on a 45 min drive home after which I parked it for a short while (about an 60-90 mins.) Then I tried to restart it . It cranked fine but would not start. After 3 or 4 attempts I let it rest for a min and then it started. And the CEL came on.

This was a few days ago. Today I finally got a chance to scan it with these results:

VCDS Version: Release 15.7.3 Running on Windows 7 x86

[URL] .....

Address 01: Engine Labels: 06A-906-032-AVH.lbl
Control Module Part Number: 06A 906 032 FR
Component and/or Version: 2.0l R4/2V G 4070
Software Coding: 00003

[Code] ....

I'm new to MK4's and I'm at a bit of a loss as to where to start. It looks to me like there's a problem with both the fuel pump relay and the crank sensor. But what to make of all the short to ground codes. Could they be caused by a bad fuel pump relay?

View 4 Replies

Golf V R32 :: Check Coolant Level Message On MFD With Alert Tone

For the last several days, most of the times I've started my car I've had the Red "Check Coolant Level" message on the MFD - accompanied by a tone / chime.

The first time it happened, I was a tad below Min, so I added a 'glug' of G13 to push it back up into the normal range. Everytime I've checked it since, the level is in the normal range.

So how is the level "sensed"? I had a new coolant reservoir put in about 18 months ago, so my "hope" is that it's not actually that (though those are really cheap).

Is there something else I should be cleaning / renewing? Maybe as simple as the electrical connection on the reservoir?

View 4 Replies

Passat (B6) :: Disable TPMS Light And Message?

How can I get rid of that stupid light "tire pressure too low" how to disable both the light and the message on dash??

View 5 Replies

Prius (2010-12) :: How To Disable Headlight Washer

I want to disable my headlight washers when my headlights are on?

View 1 Replies

Santa Fe (DM - 2013+) :: How To Disable Safety Agreement Message On Infotainment

Is there a way to disable the safety agreement that comes up on the radio every time you turn the car on? This is such an unnecessary PITA to have on this vehicle. Is there a setting or a way to find the file in the system and delete it?

View 10 Replies

Lexus GX 2004-09 :: How To Disable Navigation System Caution Message

My wife drives a 05 GX470. Is there a way to disable the caution message (i.e. Caution: Drive safely and obey traffic rules...) that appears on the navigation screen every time you start the suv?

View 5 Replies

Golf IV / Jetta IV :: 2.0 Engine Is Sputtering And Rough Running On Morning Start - No VCDS Fault Codes

I have a 2008 MK4 2.0 with only 53,000kms. At 40,000Kms I put new OEM spark plugs.

Just recently, every morning when I start the engine is sputtering and rough running. The engines want to die but I give a little gas, and run rough like it is only firing on two or three cylinders.

When it gets to the normal operating coolant temperature it runs without any problem and I can use the AC. Its only give me this problem on the first start of the day.

Does not have any MIL light on the instrument panel. I scan it with VCDS-Lite and do not found any fault codes. The only thing that's come to my mind is to change the Green Coolant Sensor.

View 3 Replies

Passat (B6) :: 2010 - Disable Press Brake Pedal To Start Message?

Is there anyway to disable this annoying "press brake pedal to start" on the 2010 with Vag Com or some other magic tricks? I searched and found a thread but no solution if there is any.

View 8 Replies

Lexus LS 2007+ :: Disable Initial Start Up Screen With Message And Then Continue Button

Any way to disable the initial start up screen on a 2013+ that tells you "Drive safely and obey traffic rules....." then has a "continue" button to select?

View 5 Replies

Camry :: 2008 Hybrid - Auto Headlight Function Enable / Disable?

I have a 2008 Camry hybrid. It comes with the auto Headlight function where the car will automatic turn the headlight on/off at night and day time. But, but for some reason it doesn't work when I first got the car (pre-owned). I check all the wires/fuse, everything is good, but it just not working. The headlight and on/off switch itself works good. I just wonder if it has an option you can disable/enable it in the console or something else that I should look for?

View 7 Replies

Touareg :: Headlight Range Control Warning Message Keeps On Appearing

It is a fairly new vehicle, Touareg SN 42xxx. It has two problems, which might be inter-related, both of which have defied all the repair attempts of a very competent and concerned dealership.

First problem: The warning message "Headlight Range Control" keeps on appearing. Much work has been done to try and fix this: Alignment of lights checked, suspension level sensors checked, vehicle inspected for damaged wires, etc. Later on in the process, both headlight assemblies and the instrument cluster were replaced. The message still appears.

Second problem: This is really minor, I only mention it because it might be related to the first problem. The instrument cluster trip computer (MFA) will not store accumulated mileage over a series of trips. In other words, if the car is stopped and started a few times, the trip computer will zero out.

View 24 Replies