Touareg :: When Parking Brake Released In MFI Got Warning Parking Brake Fail To Release
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesTiguan :: 2011 - Parking Brake Would Not Release
I got my 2011 Tiguan today but the manual is being shipped up so I don't have it yet. I got it home (I love it), and I stopped at my mailbox and engaged the parking brake. I had engaged it before and only had to let up the clutch and it would disengage. This time it stalled. I started it again. Pushed the parking brake button down. It would not release. Pulled it up. It would not release. Simultaneously pulled it up and put my foot on the brake, and it released. I know it's gotta be easier than this, but I don't know the trick yet I guess.
View 11 RepliesGolf IV / Jetta IV :: 2003 - Parking Brake Won't Release
It's a 2003, 2.0, rear disks. If I take it apart and manually compress the piston with that rotating clamp that Autozone lent me I can put it back together and use it 2 or 3 times and then it's too tight and I have to take it all apart again. I don't have the cable hooked up, I just move the lever with my hand or a screwdriver.
I'm a little irritated cause I replaced this caliper last year. I remember finding a good description of how this device worked and now I can't find it again.
Infiniti - Q45 :: 1994 - Unable To Release Parking Brake
The parking brake is both set and released with the parking brake foot pedal. I can't get it to release. If there is a release button or another way to release the parking brake??
View 6 RepliesLexus RX 2010-15 :: When Release Parking Brake It Make Loud Noise
I recently noticed that when I release the parking brake on our new 15 F-Sport it make a loud noise. It's hard to explain, but it kind of sounds like a spring being released with a clunking sound. (Sorry for the weird description).
When I press the brake to set it I am not pushing it all the way to the floor or forcing it at all. I am just using normal pressure to apply it.
Golf IV R32 :: Minor Hesitation And Audible Thunk When Release Parking Brake
Quick background. 1+ years ago I'd sometimes get the "moo" when in reverse. It was intermittent and never enough or a persistent issue to address. Recently, no moo, but I noticed when I'd release the parking brake and move forward there'd be a minor hesitation and an audible thunk, not too pronounced, then it'd roll freely from then forward.
Replaced rear brakes a few weeks ago, noticed the right side parking brake arm doesn't reset as far free as the left. Pushing it 'home' by hand made a little thunk in the cable house up near where it bends towards the vehicle's midline. Brakes installed, and it spun freely by hand with perhaps only a very small amount of 'hiss' but not consistent for a full revolution, only periodically. Lubed both cables from the center console.
Last night installed parking brake return springs, set and released the parking brake a few times to see how it felt. Right side looks like it still does not return home 100% (maybe, 2-3mm away, same as before). Today, made a run to Napa. Got there fine, when leaving, drop the parking brake, and as I'm grabbing reverse I get a yellow dash light and a "check brake pads" warning. I drove about a block, pulled over, shut off engine, got underneath (no parking brake set) and the arm seemed to sit about where it should. I drove a few miles at low speed, pulled over (left engine running, set parking brake), checked temp of all rotors (both sides) with my finger, nothing noticeable. Drove a few more, repeated the above (engine running, brake set) and temps were still cool.
Got home, replaced fans. Started up to test fans, and the error isn't there now.
If it was going to throw an error I'd more likely expect it when leaving home, where I had cycled the parking brake handle multiple times. No error there, or en route to Napa. Leaving Napa, parking brake engaged only once, I got the error. Powering off and restarting, it was still there. Successive stops did not have the engine shut off. Once home, it cleared.
Ford Super Duty (1999-2016) :: Parking Brake Release Under The Dash Way Down Low
The '99 F250 has the parking brake release under the dash, way down low. While I was in the wrecking yard, I noticed many Excursions and Econolines have them on the left, by the parking brake. Whether one of those might work, if I installed it on my '99?
View 3 RepliesElantra XD (2001-06) :: Hand Brake Stuck - How To Release
2001 Elantra, Hand brake stuck, is there a release button? I can not seem to release my hand brake. How can I release it so I can make adjustments?
View 2 RepliesLexus IS 2014+ :: Brakes Squeak When Release Brake Pedal
I have a 2015 IS250 F Sport with brakes that squeak. First time dealer said can't replicate and suggested hard braking to burn off any residue on rotors. Second time, dealer replace rear brake calipers which resulted in mix match colors of the brake caliper and bracket. Not happy.
Well it's starting to squeak again. Not sure if moisture and or cold has anything to do with it. Washed the car yesterday and as I was moving it down the driveway (small incline) the brakes squeaked as soon as I released the brake pedal. I was able to replicate this several times yesterday.
This morning brakes squeaked as soon as I released the brake pedal. Not on an incline driveway today.
Accent LC (2000-05) :: Rear Brake Squeak On Pedal Release
The squeak is most pronounced when the brake pedal is released, but it still makes a quieter squeak when the pedal is depressed. I can't tell which side it is coming from; my guess is the middle of the rear or the left rear. I can't tell because I have to be in the car to release the brake (I guess I could tie a string around a brick and pull on it when I'm by the rear wheels). I should mention that all three of the belts are due for a change. Which part is causing the brake system squeak? The brakes work; replacing the squeaking part or parts is going to be lower on the project queue than the CD player/radio errors and replacing the belts, pulleys, etc. in the engine compartment (I've posted elsewhere on the forums about those issues).
View 5 RepliesJeep - Cherokee :: Shrill Whistle Emits When Release Brake Pedal
I have always taken car to dealership for service/repairs. Recently left car at dealer service for just the above issue. They said they could not duplicate the sound. Perhaps they didn't drive long enough..it hadn't 'warmed up'? Everyone who rides with me hears it. It is very very annoying. What could this be?
View 6 RepliesCamry :: Adjusting Parking Brake (E-Brake) Pedal On 6th Gen Toyota
I have a 2010 toyota camry that needs a parking brake adjustment. the car still stops with the transmission even if the parking brake pedal is pressed down. I changes the pads in the back and it seems to be a little better, but it's not as good as other Camry's I've been in. Where to look as far as the adjustments go? and possibly how if it's not the usual method.
View 4 RepliesLexus RX 2010-15 :: Hissing Noise When Press And Release Brake Pedal On RX350 2013
Is it all the lexus rx350 had that noise? From the day I noticed hissing noise when I gentally press the brake pedal down and release it . And same noise can be heard when drive slowly and release gas pedal.
View 10 RepliesHyundai - Elantra :: 2013 - Thunk Sound And Lurch When Release Foot From Brake Pedal To Go Into Drive
After driving in the rain and starting the car again after a few hours (as in starting the car again after work, or starting it first thing in the morning) the following happens: As soon as I release my foot from the brake pedal to go into "drive," there is a "thunk" sound from the rear of the car as well as a lurch. A soft "thunk" may have a soft 'thunk" sound, but a louder thunk will have a pronounced lurch/jerkiness from the rear. The car drives OK and has no problem with braking when I apply the brakes.
It happens only after driving in the rain. The dealer says the sound and movement are the normal result with disc brakes wearing off the rust on the rotors. Other wet weather concern (happened once): while driving in a couple inches of snow, the brakes began to grind and eventually failed to bring the car to a stop. Dealer rotated the rear rotors (due to uneven wear, although I had the car only two weeks at the time) and installed new rear brake pads. He said grinding brakes on an Elantra are normal in rainy, snowy, and dusty conditions. Is my car really safe to drive? Is there a problem? I'm considering trading it it as I don't feel safe. It is an otherwise OK car.
Passat (B6) :: CEL Is On - Parking Brake Is Stuck
Just got my hair cut and go to start my car and the damn thing is stuck!! The check engine light is on and there is a P with a circle and a line through is like a no smoking sign. IT says parking brake fault see owners manual. Well I can't find anything in the manual as to how to get this thing to release. The car is on a slight hill, nothing steep. I know for a fact I did not put it on. Manul says it will test itself if not used for a long time. How to get this car moving? Its sitting there about 2 miles down the road.
View 24 RepliesElantra HD (2006-10) :: Right Rotor Is Stuck On Parking Brake
Doing a rear brake job on my 2008 elantra. Left went fine. However, the right rotor is stuck on the parking brake. It is loose, but held on to the springs of the parking brake.
How do you back off the parking brake? Also, how do you remove the parking brake cable?
Passat (B6) :: Won't Change Blinkers - Stuck In Parking Brake?
ok, just started to use my vag and now im stuck on trying to change my blinkers from 3 to 4 clicks and releasing to parking brake
View 1 RepliesPhaeton :: Parking / Emergency Brake Warning Light
There are a few threads on a sticking parking brake resulting in the warning light remaining on. Mine has developed to a stage that it requires a toe under the foot pedal every time to silence the alarm.
I finally stuck my head in the footwell this morning to look at the mechanism, expecting to see a strained spring. However there was no spring in evidence and I saw that when the parking break is released, the cable remains with some free play above the contact point with the pedal: i.e. there is no tension on the cable when the pedal is released, there is about 15mm of "free cable", leaving the pedal almost "floppy".
Observations
1) The pedal has no spring to return to it's correct position. Based on self study guide SSP_277 this is not as it should be as on page 37 this discusses a spring mechanism in the pedal
2) I would image there should be tension in the cable even when released; I feel the rear mechanism requires inspection as there are springs there.
3) While the parking brake works fine, It has a lot more travel that it previously had. Thus something is worn, stuck, or the self adjusting mechanism is not working.
4) For the record, car has 110K miles, the temperature is above freezing, the behaviour is not weather dependent and the parking brake has been routinely used (2008 car).
5) My recollection from new is the parking brake was released with a significant spring action: quite abruptly.
Camry :: 2007 - Rear Rotor Stuck On Parking Brake
I am trying to remove the rear rotor of a 2007 Camry, but it appears to be stuck on the parking brake. The parking brake is not engaged, but the pads are firmly pressed against the rotor (rotor was loosen from hub assembly using bolts through the two threaded holes).
I have removed the rubber plug and attempted to turn the star adjuster, but it doesn't seem to move in either direction. Also, the adjuster should rotate away from you to tighten the brake and toward you to loosen, correct?