Touareg :: When Parking Brake Released In MFI Got Warning Parking Brake Fail To Release
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesLincoln - Towncar :: 1994 - Parking Brakes Won't Release?
The car hadn't been used in a while, and I stupidly stepped on the parking brake. Now it won't release. It's a push on/push off, but it won't clear even when pushing it to the floor. How do I get it to release? I don't know a lot about cars.
View 7 RepliesTiguan :: 2011 - Parking Brake Would Not Release
I got my 2011 Tiguan today but the manual is being shipped up so I don't have it yet. I got it home (I love it), and I stopped at my mailbox and engaged the parking brake. I had engaged it before and only had to let up the clutch and it would disengage. This time it stalled. I started it again. Pushed the parking brake button down. It would not release. Pulled it up. It would not release. Simultaneously pulled it up and put my foot on the brake, and it released. I know it's gotta be easier than this, but I don't know the trick yet I guess.
View 11 RepliesGolf IV / Jetta IV :: 2003 - Parking Brake Won't Release
It's a 2003, 2.0, rear disks. If I take it apart and manually compress the piston with that rotating clamp that Autozone lent me I can put it back together and use it 2 or 3 times and then it's too tight and I have to take it all apart again. I don't have the cable hooked up, I just move the lever with my hand or a screwdriver.
I'm a little irritated cause I replaced this caliper last year. I remember finding a good description of how this device worked and now I can't find it again.
Phaeton :: Parking Brake Pedal Stuck / How To Release
This morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesLexus RX 2010-15 :: When Release Parking Brake It Make Loud Noise
I recently noticed that when I release the parking brake on our new 15 F-Sport it make a loud noise. It's hard to explain, but it kind of sounds like a spring being released with a clunking sound. (Sorry for the weird description).
When I press the brake to set it I am not pushing it all the way to the floor or forcing it at all. I am just using normal pressure to apply it.
Golf IV R32 :: Minor Hesitation And Audible Thunk When Release Parking Brake
Quick background. 1+ years ago I'd sometimes get the "moo" when in reverse. It was intermittent and never enough or a persistent issue to address. Recently, no moo, but I noticed when I'd release the parking brake and move forward there'd be a minor hesitation and an audible thunk, not too pronounced, then it'd roll freely from then forward.
Replaced rear brakes a few weeks ago, noticed the right side parking brake arm doesn't reset as far free as the left. Pushing it 'home' by hand made a little thunk in the cable house up near where it bends towards the vehicle's midline. Brakes installed, and it spun freely by hand with perhaps only a very small amount of 'hiss' but not consistent for a full revolution, only periodically. Lubed both cables from the center console.
Last night installed parking brake return springs, set and released the parking brake a few times to see how it felt. Right side looks like it still does not return home 100% (maybe, 2-3mm away, same as before). Today, made a run to Napa. Got there fine, when leaving, drop the parking brake, and as I'm grabbing reverse I get a yellow dash light and a "check brake pads" warning. I drove about a block, pulled over, shut off engine, got underneath (no parking brake set) and the arm seemed to sit about where it should. I drove a few miles at low speed, pulled over (left engine running, set parking brake), checked temp of all rotors (both sides) with my finger, nothing noticeable. Drove a few more, repeated the above (engine running, brake set) and temps were still cool.
Got home, replaced fans. Started up to test fans, and the error isn't there now.
If it was going to throw an error I'd more likely expect it when leaving home, where I had cycled the parking brake handle multiple times. No error there, or en route to Napa. Leaving Napa, parking brake engaged only once, I got the error. Powering off and restarting, it was still there. Successive stops did not have the engine shut off. Once home, it cleared.
Ford Super Duty (1999-2016) :: Parking Brake Release Under The Dash Way Down Low
The '99 F250 has the parking brake release under the dash, way down low. While I was in the wrecking yard, I noticed many Excursions and Econolines have them on the left, by the parking brake. Whether one of those might work, if I installed it on my '99?
View 3 RepliesPontiac - Bonneville :: 1994 - Unable To Move The Car Out Of Park
My car was running fine. I drove it 2-3 miles city & freeway a week ago to make sure. I was going to lend it to a friend and handed him the keys at a different location. When I got home he showed me that he was unable to move the car out of Park. I got in and the motor started fine. I checked and the battery was showing at the normal level,but I too could not budge the car out of Park. That was a few days ago.
Today I went out to start the car up and to my surprise, the battery is completely drained. The battery is only about 17 months old. I previously had had the motor rebuilt a couple of years ago and the car hasn't been driven but 2-3 thousand miles since.
What the problem may be? What kind of mechanic should look at it? (the friend admitted to pushing buttons but since I wasn't there I don't know if that was before he tried to move out of Park or after).
Passat (B6) :: E-Brake Won't Release When Change Brake Pads?
Having issues with the auto-ebrake? My friend has a 09 passat with the push button ebrake. He was changing his brake pads when his ebrake will not release. He was told by VW to not use a c-clamp to depress them as they would mess up the sensors or something along those lines.
View 14 RepliesInfiniti :: 1996 - Brake Light Switch Replacement On Multiple Occasions
I have 1996 Infiniti I30. I have had to replace the brake light switch on multiple occasions. And even now it appears that I may have to again after replacing it about a two months ago. What would cause this, faulty switches or internal electrical problem?
View 1 RepliesPassat (B5) :: 2003 - Unable To Get Out Of Park When Brake Pedal Depressed
I have a 2003 Passat GLX 4Motion that was fine Monday...Having heavy rain Monday and with brake pedal depressed unable to get out of park..I have brake lights but when I got into car and started it I have airbag light and esp light on as well as check engine light...Is there a way to by pass the shift lock solenoid so I can move car into my garage...
I cleaned connections as was suggested and had a tough time as Bentley Manual states to remove console one must put lever into 3 which as lever is stuck in PARK was impossible...I tried pulling out the shift knob button as described and when I still couldn't get any response found that when I pushed the button back in that I was finally able to get shift lever to respond and finally come out of park...
I now get code for no TCM Signal P1626 No Powertrain Data Bus Signal Missing Message from TCM which now triggers ABS , Airbag ,ESP , and Check Engine light all with the cause no TCM Signal .... Now wondering if any easy way to test for data bus signal ?
Elantra HD (2006-10) :: Unable To Remove Rear Brake Rotor?
2008 hyundai elantra. I'm trying to replace the rear brake pads and rotors. I was able to do the front ones easily. Any good tips to remove this rotor. I have tired tapping on a rotor and it wont budge.
View 2 RepliesCamry :: Unable To Find A Diagram For The Rear Brake Drum Of 2005?
Worthless Chilton's manual went in trash. I don't have a working PC and Im unable to find a diagram for the rear brake drum of my 2005 camry.
View 3 RepliesSaturn - Vue - Clutches :: 2004 - Unable To Get It Into First Gear When In Neutral With Foot On Brake
I have a manual transmission and am having difficulties with my stick shifter. I had my car in neutral with my foot on the brake, and when I tried to shift into first gear I was unable to get it into gear. I wasn't able to get it in any other gear as well. Once the car was turned off though, I had no problems getting into gear. But when I turned the car on again, I wouldn't allow me to get anywhere but neutral. After about 10 minutes being off and not moving, the car shifted like normal again and I was able to drive it without a problem.
View 1 RepliesElantra XD (2001-06) :: 2004 - Rear Brake Sticks / Parking Brake Is Broken
I have a 2004 Elantra GLS. My left rear brake was hanging (wheel was very hot to the touch after driving, while other wheels were not), so I had a friend check the brake pads. We decided to replace the pads and rotors. While doing so, the parking brake seemed stuck in the on position, so I opted to have him disconnect it completely until I could afford to replace it. I had used it for the first time about 2 weeks before I noticed the hot brake problem, so we figured that must have been why the brake was hanging.
My friend replaced the rotors and pads, put some penetrant/lubricant on the piston of the caliper and reassembled the brakes. He did use the special tool to spin the caliper in when putting the pads on, however he didn't know that was necessary and tried to force them in with a C-clamp first.
Now, I seem to have two problems:
1. The left rear brake still hangs sometimes. I will drive the car and when I park it I can feel the heat coming off of the left rear wheel. It is extremely hot, so I know the brake is hanging (even with the parking brake disconnected). What is the problem here? Is the caliper bad? Would replacing the caliper solve the problem? Does the parking brake have to be connected to stop the caliper from hanging up?
2. My second problem is the pulsating of the brakes. I am afraid the rotor is warped because of the heat, or maybe he didn't clean everything well enough before he put the new rotor on. How can I figure out what the problem is? Is there a way to check a rotor to see if it is warped? Could there be another reason I feel the pulsating brakes? By the way, the brake fluid is full.
If the caliper needs to be replaced and I can leave the parking brake disconnected, are there any special instructions my friend should know about before working on this? He does work on a lot of cars and rebuilds cars to sell, so he is pretty knowledgeable. I think the only thing he didn't know about was rotating the piston. I would like to provide him with detailed instructions if necessary.
Honda - Accord :: 1998 - Parking Brake Light Comes On Until Jiggling The Brake Handle
The red dash light for my parking brake stays on until I jiggle the brake handle, then it stays off until I re-start the car the next time and then it goes on again. Brake fluid is fine.
Appears to be a faulty switch attached to the handle. How do I fix this? Is it a major job? [it's a 1998 Honda Accord]
Touareg :: Release Emergency Brake Message In The MFI
Had this issue on my first Touareg as well as the replacement. When you pull the emergency release handle (firmly and all the way) it doesn't fully release the brake. You realize this when the vehicle begins moving and you get the "Release Emergency Brake" message in the MFI.
They replaced the emergency brake assembly. The service rep told me before he returned the car to me that his tech was less than satisfied with the design of the hydraulic assembly and that he expected it to develop the issue again. He was right. Two weeks later the thing is sticking again.
Ford Super Duty (1999-2016) :: 2012 F250 - Parking Brake And E-brake Adjustment?
The problem is I haven't seen one for a recent (2011+) SD. I don't see anything that resembles a rear drum. They look like 2 huge regular disc brakes.
I live on a hill. My old man taught me to put the trans in neutral, autos and manuals, put the ebrake on and make sure it holds the vehicle, then put the trans into park or 1st gear. This way the weight of the vehicle doesn't rest on the transmission.
How do I adjust the Ebrake? It's ALMOST holding the truck, just needs a minor tweak. I don't see the dust cover the write ups described at all. The one that reveals the Star Wheel. Are they different on these years then prior SD's?