Accent LC (2000-05) :: Squeak When Releasing Brake Pedal
2004 Accent 1.6L 5spd
Purchased this car used with 64k miles on it. I am in the process of performing the 60k miles service items and going through typical replacement of worn parts.
I have noticed that my rear passenger brake drum assembly squeaks when I let off the brake pedal. Note that this is not noise when applying brake pressue, but after releasing the brakes. Additionally, the drum happens to be rusted very badly. It took a good amount of brute force to remove the drum in order to inspect the brake assembly. There was a lot of brake dust built up and I thought that cleaning that out would get rid of the noise.
I suspect it could be one of the springs but I cannot be for certain. The squeak does not occur when I release the parking brake.
Lexus IS 2014+ :: Brakes Squeak When Release Brake Pedal
I have a 2015 IS250 F Sport with brakes that squeak. First time dealer said can't replicate and suggested hard braking to burn off any residue on rotors. Second time, dealer replace rear brake calipers which resulted in mix match colors of the brake caliper and bracket. Not happy.
Well it's starting to squeak again. Not sure if moisture and or cold has anything to do with it. Washed the car yesterday and as I was moving it down the driveway (small incline) the brakes squeaked as soon as I released the brake pedal. I was able to replicate this several times yesterday.
This morning brakes squeaked as soon as I released the brake pedal. Not on an incline driveway today.
Accent MC (2006-11) :: Brake Squeak When Releasing Pedal
Started a few months ago didn't really bother me until now. Started when I would forget the parking brake is on and would just put the car in reverse & wouldn't move until I released the parking brake. Did it about 5-7 times and now every time I brake without the parking brake on, it squeaks & is really annoying. Is there any way to fix this or is it just gonna be complicated & expensive?
View 10 RepliesAccent LC (2000-05) :: Brake Pedal Making Noise Like Clicking
My daughter has bought a 2003 4 door accent and on the way to work she lost most of the brakes. I could not see any fluid leaking and the level was ok. I did try pushing on the brake pedal with my hand and it was making a noise like a clicking? I was thinking it was just the brake light switch but not sure. The place she bought it from put new brakes on it when the driver side was getting really hot. I am thinking maybe air in the system? It sounded like a caliper was sticking when I test drove it but only a couple of times. You would have some brakes but you had to pump the peddle.It is in a parking lot right now but I can work on it unless it is some sort of different? I am going to try to bleed it in a little bit but was thinking I should ask around. I read that the piston could be sticking but can you just rebuild the master cylinder to fix it if that is what it is? I could pull the pedal back a little bit. I only looked at for 4 or 5 minutes kinda dark and no tools with me.
View 10 RepliesAccent LC (2000-05) :: Brake Pedal Went Down Half Way Before Engaging And Hardening
Picked up an 02 Accent with 97K for local use. The brake pedal went down half way before engaging and hardening. Front brakes were good. Rear shoes were worn and had a leaking wheel cylinder on the right side. Changed the shoes and both wheel cylinders. Bled the rear brakes with the engine off by pumping the pedal slowly and opening the bleed to make sure I got no air in. Pedal got hard just off the top and the shoes hold the brake drum tight.
Now, turn the engine on and the pedal goes all the way down before it grabs and gets hard. I was going to bleed again with the engine on to see if that makes any difference. Can't see that it's the master cylinder and the car has no abs.
Hyundai - Accent :: 2000 - Brake Pedal Pressure Changing After Cylinders Replaced
I own a 2000 Hyundai Accent with 85,000 miles on it. I recently took my car into a local shop because the pressure on my brake pedal was extremely low. I was almost pushing it to the floor. On my first trip to the shop, they replaced the rear wheel cylinders because they were leaking. This replacement didn't fix my problem.
On the second trip to the shop, they replaced my master cylinder. I did call around to other shops to do a price comparison and the price was reasonable on both jobs. This work was done about two weeks ago.
At first, this seemed to fix my problem, the pressure was perfect. Since then I've been having an intermittent problem with the brake pedal pressure changing. It would get a little hard during driving, but would correct itself after a few moments. I don't drive that often or very far, so I was waiting to see if the problem would get worse.
Last night it did. I went out and when I tried to drive my car home my pedal was extremely hard. I could barely push it. While I was driving my car home (I was close to home), it felt like I was driving with my brakes on. My car would stop as soon as I took my foot off the gas pedal, I could not coast. When I got out, I could feel heat coming from the front tires, which I didn't even have work done on. There was also a smell that I've never smelled before. It almost smelled like something burning.
I was told I should have my car towed back to the shop on a lifted bed and not rolled there and that they should fix my car at no charge because they did something wrong.
My ultimate question is did the shop do something wrong and should I take it back to them if they did? Should they be responsible for this new repair? I don't want to go demanding anything if it's possible this is a whole new problem and not their fault. Even though it does seem like an awfully big coincidence. My next question is: what could be possibly wrong with my car? I would like to know what I'm getting myself into.
Accent LC (2000-05) :: Auto Door Lock Is Not Functioning Even When Press The Brake Pedal
I'm having Hyundai Accent GLS Model 2005. Since yesterday, My tail lamp and Third Brake light is still switched on even I turn off the light & I notice that my Auto door lock is not functioning even I press the Brake Pedal. I tried to disconnect the battery & the Fuse and place it back but it doesn't works. Currently, I just pull out the fuse.
View 6 RepliesPhaeton :: Parking Brake Pedal Stuck / How To Release
This morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesAccent LC (2000-05) :: Rear Brake Drum Cylinder Removal?
I must replace my driver's side rear brake drum cylinder but I am unable to fit any socket or wrench on the backing plate bolts holding on the brake cylinder. They are rusted and never been touched I think; how does one remove the bolts holding on the brake cylinder without stripping them? There is basically no room for leverage and the walls of a socket are too thick.
View 3 RepliesJeep - Cherokee :: Shrill Whistle Emits When Release Brake Pedal
I have always taken car to dealership for service/repairs. Recently left car at dealer service for just the above issue. They said they could not duplicate the sound. Perhaps they didn't drive long enough..it hadn't 'warmed up'? Everyone who rides with me hears it. It is very very annoying. What could this be?
View 6 RepliesTouareg :: Brake Pedal Annoying Squeak
I love my V8 Treg...one squeak that is troublesome...quickly releasing the brake pedal causes an annoying squeak... what I might do to resolve the issue?
View 1 RepliesAccent LC (2000-05) :: Steam Pressure Release Noise
Lately when I drive my car, I hear like a steam pressure release noise.. And happening ONLY when I have my Fan on in the car.
Sometimes it's soft and sometimes is a long loud one, and then you can feel the car holding in. (like quickly hitting the brakes a little bit)
How to explain it. I have a 2004 Hyundai Accent 2 doors.
Lexus RX 2010-15 :: Hissing Noise When Press And Release Brake Pedal On RX350 2013
Is it all the lexus rx350 had that noise? From the day I noticed hissing noise when I gentally press the brake pedal down and release it . And same noise can be heard when drive slowly and release gas pedal.
View 10 RepliesAccent MC (2006-11) :: Loud Noise From Exhaust When Stop And Release The Brake
Accent 2006. When I start the car and start to drive, the car rock on the driver's side. I think it's the driver's rear. Then the feeling of a flat tire is felt but the tire seems to be ok. Occasionally hear a loud noise like from the exhaust and when I stop at a stop sign or stop lights and release the brake the car does not move till the accelerator is pressed and it rocks again and moves. It has 99000 km on it.
View 1 RepliesHyundai - Elantra :: 2013 - Thunk Sound And Lurch When Release Foot From Brake Pedal To Go Into Drive
After driving in the rain and starting the car again after a few hours (as in starting the car again after work, or starting it first thing in the morning) the following happens: As soon as I release my foot from the brake pedal to go into "drive," there is a "thunk" sound from the rear of the car as well as a lurch. A soft "thunk" may have a soft 'thunk" sound, but a louder thunk will have a pronounced lurch/jerkiness from the rear. The car drives OK and has no problem with braking when I apply the brakes.
It happens only after driving in the rain. The dealer says the sound and movement are the normal result with disc brakes wearing off the rust on the rotors. Other wet weather concern (happened once): while driving in a couple inches of snow, the brakes began to grind and eventually failed to bring the car to a stop. Dealer rotated the rear rotors (due to uneven wear, although I had the car only two weeks at the time) and installed new rear brake pads. He said grinding brakes on an Elantra are normal in rainy, snowy, and dusty conditions. Is my car really safe to drive? Is there a problem? I'm considering trading it it as I don't feel safe. It is an otherwise OK car.
Prius (2004-09) :: Squeak From Engine Compartment When Pushing Brake Pedal
A few days ago, while on a road trip from CA to CO, I noticed a loud squeak from the engine compartment every time I pushed the brake pedal, no matter how lightly, no matter what speed. It even happened when the car was off. I have almost 60K miles on my '05.
When I arrived in Denver, I dropped the car off at a Toyota dealer for troubleshooting. They isolated the fault to a bad ABS actuator. They had to overnight the part, and spent a day and a half installing it. Sounds like a major project!
Prius (Gen 3) :: Honking Noise When Pressing / Releasing Brake Pedal And Squeak When Backing Up
I had 2 brake related issues. First was a honking noise when pressing/releasing the brake pedal (covered by T-SB-0363-10, attached below). Second was rear brake squeaks, particularly when backing up (T-SB-0102-11, attached below). I had the squeak issue repaired under a previous TSB a few years ago, but the noise came back after a while, and the updated TSB includes replacing the pads and other parts.
View 8 RepliesPrius (2004-09) :: Squeak Occurs When Car Is Stationary With Brake Pedal Fully Depressed
I have recently purchased a 2007 Gen 2 Prius and sometimes it emits a very annoying squeak. It occurs when the car is stationary, with the brake pedal fully depressed. When inside the vehicle it seems to be coming from behind the glove box. When on the outside and facing the car it seems to be coming from below / behind the electric motor. I have made a recording of it with the noise in question being audible for a couple of seconds at 0:13, and then again at 0:22 until the end. It could be nothing I guess, but this is my first hybrid and I am not too sure what is perfectly normal and what is not.
View 14 RepliesAccent LC (2000-05) :: Pulsing Wheel Squeak On Left Turns
I'm getting a pulsing. High-pitch squeak from what sounds like the left/front wheel when making left turns and occasionally driving straight at low speeds after a left turn, usually while NOT applying the brakes. In fact, applying the brakes firmly stops the sound until I release the pedal. After that, sometimes it comes back immediately and sometimes not.
Two weeks ago I replaced the R/F cv axle and the sway bar link. Harder job than it should have been because I had a heck of a time getting the lower ball joint bolt free.
This past weekend, I replaced both front rotors because I was certain that one was warped since I was getting a very loud pulsing squeal only when braking. I also have had a tendency to over torque the lug nuts which I had read can cause warped rotors. I now use a torque wrench for that.
I've made sure that the rotor shield isn't touching anything and checked the pads for damage and unusual wear. Pads are at about 75%.