Passat (B6) :: CEL Is On - Parking Brake Is Stuck

Just got my hair cut and go to start my car and the damn thing is stuck!! The check engine light is on and there is a P with a circle and a line through is like a no smoking sign. IT says parking brake fault see owners manual. Well I can't find anything in the manual as to how to get this thing to release. The car is on a slight hill, nothing steep. I know for a fact I did not put it on. Manul says it will test itself if not used for a long time. How to get this car moving? Its sitting there about 2 miles down the road.

View 24 Replies

Passat (B6) :: Stuck In Park - Electronic Parking Brake Failure Came On?

Ok so this is the problem now, i went to check my fuses and pulled a #20 out to see if the cigarette lighter fuse was blown. Guess what? i start the car and all of a sudden the Electronic Parking brake failure kicked on. I tried to get the car out and now it won't get out of park! FML i heard that you can just unplug the battery for 15 min and that should reset the car but who knows... I got vw roadside coming to see what they can do it might need to get towed though

View 7 Replies

Ford Wiring/Electrical :: Both Blinkers / Tail And Parking Lights Came On When Push In The Brake

I just bought my first Ford its an 1996 f250 powerstroke, and I am having issues with it. Every time I push in the brake both blinkers come on and tail lights and upper parking lights on cab, and when I turn on a blinker everything flashes.

View 8 Replies

Passat (B6) :: Stuck In 3rd Gear After Hitting Puddle / Parking Brake Fault Light Lit Up

Hit a puddle-now car is stuck in 3rd gear... with parking brake fault light lit up. How to fix it? it happened on the highway on the way to work at 70mph . so now i either have to drive home with it the rpms at 4k or get it towed. Car is a 2006 passat with 35000 miles.

View 5 Replies

Elantra HD (2006-10) :: Right Rotor Is Stuck On Parking Brake

Doing a rear brake job on my 2008 elantra. Left went fine. However, the right rotor is stuck on the parking brake. It is loose, but held on to the springs of the parking brake.

How do you back off the parking brake? Also, how do you remove the parking brake cable?

View 1 Replies

Phaeton :: Parking Brake Pedal Stuck / How To Release

This morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.

View 4 Replies

Camry :: 2007 - Rear Rotor Stuck On Parking Brake

I am trying to remove the rear rotor of a 2007 Camry, but it appears to be stuck on the parking brake. The parking brake is not engaged, but the pads are firmly pressed against the rotor (rotor was loosen from hub assembly using bolts through the two threaded holes).

I have removed the rubber plug and attempted to turn the star adjuster, but it doesn't seem to move in either direction. Also, the adjuster should rotate away from you to tighten the brake and toward you to loosen, correct?

View 13 Replies

Ford - Ranger :: 2005 V6 Will Not Move / Parking Brake Stuck On?

My buddy has 2005 Ford Ranger, 4.0L V6, manual with 4WD. It cranks fine, shifts through gears, but it will not move. We're thinking something to do with the parking brake, but I don't have much knowledge about brake systems. A cursory inspection showed a cable without much rust, some rust on the rear drum brakes, and around the mounting where the brake cable runs into the brake drum. I can pull downward on the cable about three inches, so it doesn't seem like the cable is pulled too taut. The pressure on the brake pedal feels about normal.

(edit: something sort of important I forgot to mention, which is why I don't think it's the transmission. In neutral, we cannot push the truck. When pushing from the rear, it will rock back and forth a few inches. When pushing from the front, the truck will not budge at all with two guys pushing on it.)

What sorts of tests can we do to pin down where the problem lies? If it is the parking brake, how can we loosen it up enough to get the truck moving to a shop (or at least to the garage where we can get to the brake shoes)?

View 17 Replies

Passat (B6) :: How To Change The Parking Light Bulbs

Any tricks that will make this job easier? They seem buried and when I reach I am only guessing as to what I am pulling out. For example, I pulled out a round cover, but what was it covering up? Must the bulb be twisted and then pulled or just pulled?

View 7 Replies

Passat (B6) :: How Hard Is It Actually To Change Parking Light

Saw that you have pull the wheel well lining and the way the made it look looked like it was a bitch to get to. Is it really that hard or is there an easy way out?

View 6 Replies

Lexus GX 2010+ :: Parking Brake Stuck (Remain Applied) After Washing

The closest car wash is less than two miles from our home and we often bring the GX home directly from the car wash and park it in the garage. We've noticed that the parking brake remains applied when we start the GX the next morning, even though the foot pedal releases. Presumably, the parking brake components were wet from the car wash and enough rust/corrosion forms overnight so that the springs to release the brake can't overcome the 'stiction'.

The GX "squats and grunts" when we put it in gear, but doesn't move. Shifting into reverse solves the problem ... there's a loud 'pop' from the rear of the vehicle as the brake releases, the GX starts to move, but in reverse, which we quickly stop with the service brake, then we shift into forward and drive off ... did I mention that we back into our garage?

I may already have confessed that we are heavy parking brake users ... every time we park the vehicle, even if just temporarily while we step out of the vehicle to get the mail, etc. We use the parking brake so much that the cable stretches and every year our dealership has to re-tension.

View 9 Replies

Prius (2004-09) :: Rear Wheels Stuck When Released Parking Brake?

My brother-in-law has an '04 with ~160K miles that we're potentially interested in picking up from him. It's been sitting for awhile with the parking brake on. When going to try it out today I released the parking brake (it seemed to release okay) but both rear wheels were stuck. I drove it a few feet and the left rear freed up but the right rear would not budge (multiple attempts.) It was dragging on their driveway and I could barely get the car back out of the way.

Looking for (videos, manual, etc.) how the parking brake works? Is there an external adjustment I can reach or some place to try to release the cable? We had an '06 that our daughter now drives but I've never had any issues with rear brakes in 200+K miles on that car.

View 19 Replies

Passat (B6) :: 2008 - How To Change Front Parking Lights

I read a few posts about changing the front parking light bulb (I think the same a city light in some countries?) in a 2008 VW Passat B6 and it seemed a quite difficult affair. However, after performing it myself I realized it's very simple and shouldn't take more than 5 mins:

First locate the cover for the front headlights:

Then open the brackets on the bottom and top of the cover. For me it worked better to open the bottom bracket first. Just flip it down with your finger:

Then inside the housing, locate the plastic flap for the parking light bulb:

Just pull it straight back. There is no hinge or anything, so just a quick pull back should do the trick:

Change the bulb and re-assemble everything back.

View 8 Replies

Passat (B5) :: 2003 - How To Change Parking Light Bulb

2003 passat wagon. I have searched all over without any luck. How do you remove the parking light covers (the ones on the corners of the car, built into the chrome trim)?
I can tell it is spring loaded, but I cant see how it pops out to change a burnt out light bulb.

View 1 Replies

Elantra MD (2010-15) :: Parking Brake Stuck / Vehicle Moved With Big Popping Sound

Went to leave for work this morning and released the parking brake and she wouldn't budge. Had to give it quite a bit of gas to finally move, along with a big popping sound. It was cold out, and haven't been using the PB in cold weather lately but did yesterday and this happened. Is there something that needs to be done with the brake? Thought I might have to get towed.

View 1 Replies

Passat (B5) :: 1999 V6 Gear Stuck In Parking

I have automatic transmission VW Passat99 V6 and it gear is messing up. I am unable to shift my gear, it stuck in parking..car is running and even i can take the key out. The brake red icon still in parking mode even if i press the brakes it wont disappear by any cost.

View 3 Replies

Ford Aerostar :: 1994 - 3rd Brake Light Stuck On - Can't Change Bulbs

About two years ago I sold my 1994 Aero (transmission was going, and other stuff) and bought a 1997 that was in much better shape. But one flaw it has is that it was used somewhere with high corrosion, so a lot of stuff is stuck or rusty. I haven't changed the rear bulbs since I got it, but this week, 2 out of three bulbs went. Actually, I only noticed the 2nd one because the blinker went too, and started blinking fast. The 3rd Brake light on top might have been out a while already.

Anyway, to my frustration, I cannot open the 3rd Brake Light to change the bulbs. Even after I removed the 2 screws, the lens won't budge. I tried gentle prying, but I can hear the plastic starting to crack. I figure there are 2 possibilities.

a) It somehow got fused to the gasket over time. or
b) It was crazy-glued shut by some insane maniac (a long-shot?). In which case I can try Acetone.

For starters, once the screws are removed, does just the red lens come out, or does the black frame around it come out with it? I tried prying on both, but one of them is surely wrong. Worst case scenario is that I break it, and have to glue it back on or get another one from a junk yard. But that is not good... Meanwhile I am living ok with just 2 brake lights.

View 5 Replies

Camry :: 2011 LE - Turn Signals As Parking Lights And Blinkers

Turn signal lights into parking/turn signals (6th gen 2011 Camry LE)? I replaced my parking lights with a bright led that matches my headlights, but I would like my turn signals to be on when my parking lights are on.

For some reason I thought they turned on with the parking lights (my other cars do), so I bought some switchback led's and after I installed them I realized that my turn signals don't come on with the parking lights. Is this something I can do by swapping out a relay or with some minor wiring changes?

I am planning on getting the relay below to stop the hyper-flashing and am curious if it would do anything else, common sense makes be believe it will not since the lights don't currently don't turn on, but I am not 100% sure. Also, is 1 relay better than another? They all seem to be the same with the exception of some have controls to adjust the flash speed.

[URL] ....

View 3 Replies

Touareg :: When Parking Brake Released In MFI Got Warning Parking Brake Fail To Release

Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!

View 4 Replies