IS F (2008-2014) :: Tightening / Adjusting Parking Brake
I was wondering if there is any way to easily adjust the parking brake so it bites tighter. I took it to Lexus of Pohanka and they told me that it's normal in a Lexus car to have to press the parking brake all the way to the carpet to get it to engage. I immediately debunked this when I recieved a loaner and engaged the parking brake and it grabs a lot sooner.
View 6 RepliesToyota - Camry :: Parking Brake Barely Holds While In Drive - Adjustment?
05 Camry, 2.4L, 47K. Vehicle parking brake barely holds while in Drive. How is this adjusted? On my 91 Corolla, the brake adjusts itself by pulling up on the handle. The Camry does not have this feature so does this have an adjustable cable? If so, where did they hide this adjuster?
View 15 RepliesToyota - Camry :: 2005 - Brake Pedal Almost Sinks?
We have a 2005 Toyota Camry, had it since 30K miles/2008, now has 94K miles. Since we have owned it, the brake pedal feel has not been great, kind of mushy. It is the way this generation Camry's are. It gets driven mostly on fwy, so not much brake use. At 92K miles I changed the front pads and rotors, pads still had 30% left on them. The rotors were somewhat warped. Brake fluid has been gravity flushed every 2 years since 2008, last one in 2012.
Now, the problem is when wife drives it, twice at a lengthy red light, she has noted that the brake pedal "almost" sinks. It did not go to the floor, but the level went lower. The car did not move during this events. With the newer ABS brake systems, on all my three cars, after a full stop, I can push the pedal down further, almost close to the floor. The Camry is the same way, just with a baseline of mushy pedals. My wife only drives one of the other ones (Dodge Caravan,)and has not complained about that one.
The brake fluid level is solid/steady, no leaks at the wheels either.
Now looking at whats involved, seems I can change the master cylinder myself. The question is do I need to? I don't mind paying a mechanic to do a diagnostic too, just not sure what they are going to do. I believe, just as a defensive measure, they will go ahead and change the MC (which then I might as well do it myself). I could also continue to drive it, but don't want to be stupid here.
Camry :: Gen 5.5 Rear Brake Drums And Parking Brake - Lubrication?
Gen 5.5 (2006 LE (57K miles), Rear brake drums and parking brake.
I want to get my parking brake lubricated and rear drums cleaned and adjusted. Is is difficult to lubricate the parking brake?
I plan on getting this done with a Mobile One oil change at a local garage.
Toyota - Camry :: Brake Pedal Is Softer Than Before So Have To Push Harder To Get Car Stopped
I have a Camry at 120K now. Front brake pads was placed at 85K and was told by the maintenance person at that time that brake rotors couldn't be resurfaced since they were close to the minimum thickness.
Braking seems still fine these days. I don't hear any high-pitched noise or feel obvious vibration/pulsation when the brake is applied. The brake pads are still within a good range of thickness as the last check was made a couple of months ago.
But the brake pedal is softer than before so that now I have push harder to get car stopped. It that a warning sign which indicates it is time to replace the brakes rotors and pads?
Toyota - Camry :: 1999 - Brake Light Comes On Sporadically / Pedal Needs To Be Pressed Down Farther
I have a 99 Toyota Camry and recently the breaklight has been coming on and off sporadically. I assumed I had done some damage to my E-break, as the other week I tried to back out with it on (cut me some slack, I just moved to PA after having only really driven in FL lol). I wasn't worried about it since I didn't notice any issues with my breaks, however the last few days I randomly have to press the pedal down almost to the floor to come to a full stop. There doesn't seem to be any consistency to this, sometimes it happens when the light is on but usually not. It does it both when I am stopped (causing me to move forward slightly till I depress it farther), sometimes when I am stopping normally, both when I'm going straight and right after turning, ect.
I checked my break fluid level and it is at the minimum line so I doubt that is the issue. I did some research and saw many saying that it was likely just air in the lines and that the system needed to be bled. But some also mentioned replacing the master cylinder so I wanted to see what response I might get on here (I don't know very much about cars myself).
Toyota - Camry :: Clacking Sensation From Brake Pedal Instead Of Smooth Downward Motion
When I press on the brake pedal, at about halfway point, I feel a clacking sensation instead of a smooth downward motion. When I let my foot off the pedal, I feel the sensation again. There also seems to be a small knocking sound when I feel that clacking.
In terms of braking, there's no issue. It's just a minor annoyance that's been bugging me for a while. Camry 2012.....
Touareg :: When Parking Brake Released In MFI Got Warning Parking Brake Fail To Release
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesCamry :: Adjusting Parking Brakes On 09?
how to do this... The brakes can be down to the ground doesn't always hold on a hill. Plus it pushes down too easy in my pinyon
Sent from my SPH-D700 using [URL] Free App
Phaeton :: Parking Brake Pedal Stuck / How To Release
This morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesPrius (2010-12) :: Parking Brake Pedal Cover Keeps Coming Off
It seems about once a week the rubber cover that goes over the food pedal for the parking brake comes off. I've been careful to replace it correctly but it still keeps happening? Btw it's a 2010 v with atp ...
View 9 RepliesSanta Fe (CM - 2007-12) :: Parking / Emergency Brake Pedal Adjustments
I went to adjust my Santa Fe's parking brake (pedal version) and am trying to troubleshoot. The pedal goes all the way to the floor, something like 11+ clicks....
I jacked up the rear end, pulled the tires off, rotated the drum so that I could access the adjusting nut and used a flat head screwdriver to rotate it all the way back to where it wouldn't rotate anymore. After that I clicked it ~5-7 clicks. Same process on each side.
Went to go test the pedal, still goes to the floor, same number of clicks, etc.
Tried to locate an adjusting nut for the pedal but cannot find one, if one exists. The fuse box sits perfectly in the way but I was able to view everything with a little bit of effort and still couldn't locate the mythical adjusting nut.
I know I did the adjustment on the rear brakes correctly so it's an issue with the pedal/cable/nut.
Buick - Lesabre :: Parking Brake Pedal Doesn't Come Back All The Way
I have a 2000 Buick Lesabre with 226k and my parking/E-brake annoys me. The brake isn't stuck or anything, but the pedal doesn't come back all the way, at least not enough to turn off the brake light or accompanying dinging. Most of the time, the cable is disconnected from the pedal to keep the light and dinging off unless I have to use it. Is there any way to adjust the parking brake to get the pedal to fully return or is there something else wrong with the system?
View 19 RepliesFord Excursion :: 2001 - Parking Brake Pedal Will Not Depress
2001 Ex limited 4x2 w/50k miles-- The parking brake pedal will not depress...at all....not even a millimeter. Feels like it is "locked".
View 2 RepliesPrius (2004-09) :: Switch For Parking Brake Pedal Light Self Loosened
The switch for the parking brake pedal light self loosened (a known issue with this switch) over the past six months and today it finally fell off the pedal assembly. The only way I can see to do the repair is to remove the three fasteners that attach the parking brake pedal assembly to the dash and drop the pedal to the floor to refasten the switch. It appears to be possible; however, there are lots of stuff around the assembly that might get in the way of dropping the assembly so I raised the white flag and called it a day.
View 2 RepliesChevrolet - Tahoe :: Parking Brake / Pedal Moved Down With No Resistance When Stepped On
I was driving my 98 Tahoe yesterday making a visit to my sister. pulled the truck into the drive-way, put the gear selector in park, stepped on the parking brake (a habit I've had for years) and YIKES! the peddle moved down with no resistance!
my parking brake light stayed on even after I released the parking brake peddle, which didn't spring back, but I pulled it back. light stayed on when I started the truck although I think the brake never engaged in the first place.
I drove the truck and didn't notice any drag at all. after driving a few miles I stopped the truck and felt the wheels for excessive heat but didn't experience that. my guess is the cable broke or came off and didn't engage the parking brake in the first place. sound correct?
Ford 6.0L Power Stroke Diesel :: Parking Brake - Pedal Goes Almost To The Floor Without Any Response
Ever since I've had this truck my parking brake has acted like this. My buddy has an '03 and his acts the same, but I figured I'd ask the question.
9 times out of 10 to set the parking brake, the pedal goes almost to the floor and doesn't seem like it really does anything. The other 1 out of 10 it goes half way and feels like it actually sets. Is this normal?
Ford Super Duty (1999-2016) :: Parking Brake Pedal Won't Stay Down
When I parked my truck at work this morning, I pushed the parking brake pedal down like always, but it popped back up. I didn't pop all the way back up, it stayed down about 1/4 of the way. Several tries yielded the same results.
Since I'm at work, I didn't have any time to crawl under there are investigate. I'll do so tonight when I get home, or maybe tomorrow. Kinda sounds like the locking "teeth" mechanism may be misaligned?? Since it doesn't come all the way back up, I'm hoping the mechanism isn't totally broken.
Ford Super Duty (1999-2016) :: 2001 F350 - Parking Brake Pedal Is Extremely Hard To Push
I have a 2001 F-350 Diesel 4x4 crew cab 8ft bed dually 7.3 diesel 6 speed. The issue is that the parking brake pedal is extremely hard to push. One day it pushed down and ratcheted into a locked position as normal and the next day I couldn't push it more than an inch down. I have rear disc brakes with internal drums in the rotors for the parking brake assembly. I replaced the shoes and hardware (which were fine) and I still have the same issue. I removed the front single cable from where it splits into the two rear ones and the foot pedal depresses smoothly and with the touch of a finger with no load on it. What else is it? The only other thing is one of the rear cables unless I am missing something?
View 5 Replies