Golf/GTI VI :: Sunroof Broken - Loud Gear Grinding Noise
Having issues with sunroof. Purchased my 2011 gti last month 3300 miles later sunroof broke like a corrado .....making loud gear grinding noises ....whole assembly wants to bust out of the headliner !
View 5 RepliesGolf VI R :: Sometimes Revs Stay After Disengaging First Gear?
Purchased my '12 R a week ago. It's got 40k on it. I noticed that sometimes after disengaging from first gear, the revs climb and hang around 1500 for around a couple of seconds.
View 7 RepliesGolf VI R :: Grinding When Go Into 5th Gear
So not having the car for more then a week one tank of gas. I was driving yesterday and as i went to go into 5th it grind. Not sure whats going on but at regular shifting it grinds if i wait till the rams drop it goes in fine.
View 3 RepliesGolf IV R32 :: 3rd Gear Grinding On Downshifts?
VW says I might need a new clutch. I have 85k on original. When are your clutches going? Do I need to change the dmflywheel as well?
i thought it might be a bad synchro. It only does it when warmed up and on downshifts. I can let the rpms drop all the way down before shifting and it will grind. rev matching i think still grinds. wont do it cold.
Golf IV / Jetta IV :: Grinding When Go From 2nd To 3rd Gear
I have been experiencing some grinding when I go from 2nd to 3rd, so the first thing that i did was to replace my trans oil but it did nothing so I went to my mechanic and he said that I need to replace the gear synchronizer. What is the part number and the real name, what i need is what is in the picture below.
My car is a mk4 1.8T with 5 gears....
Golf/GTI VI :: 2010 - Bad Grinding When Shift From 1st To 2nd Gear
when i shift from 1st gear to 2nd gear, above 2500 rpms i get a really bad grinding, i am just under 50,000 miles so it is going to the dealership to get fix. It also kicks me out of second gear some time.
View 24 RepliesGolf/GTI VI :: Slight Grinding When Shifting Into 4th Gear
Just recently, my car 6 speed has started acting up and it's got me worried. First, and most notably, when I go to shift into 4th gear, there is a slight grinding noise and its a little tough to shift into 4th. Once it is in 4th gear, though, it shifts and drives fine with no other grinding noise. A buddy of mine says it might be the synchros, but what that means or how I can fix it.
Also, it has been having a rough idle on startup for a while now. It will idle at around 1,200 RPMs for a bit when I start it up, and it will kind of backfire out the exhaust a bit, kind of like it's a misfiring coilpack or something, but will usually go away after I drive for a bit.
Driving my car right now isn't very fun when I am only worrying about what's wrong with it, so I really want to get it fixed sooner rather than later, before these develop into larger problems.
Saab - 9-3 :: Grinding Noise From Manual Transmission In 3rd Gear
I have a 98 saab 900 se turbo.90000 miles on it. Just had a new clutch kit/throwout bearing and master cylinder clutch installed, as the clutch was going bad.
When I shift the car (while driving) from 2nd into 3rd/4th/5th gear,and accelerate I suddenly notice what sounds like a "grinding"/raspy noise that stays with the car while in those gears. It does not occur in 1st or 2nd , although it seems that in first gear the rpms go up real fast now (could the gears be slipping again?? this is a brand new clutch..).
The second I shift to 3rd gear and give it gas, the noise shows up instantly. Now when I let my foot off the gas, the noise goes away 100%. The second I give it gas again, it comes back. Also I don't believe the noise increases or decreases in relation to the speed of the vehicle. It seems to stay constant no matter what speed I'm at, as long as I'm actively giving it gas.
It occurs every time I drive..not sure what to do and what causes this..maybe I just need to check the transmission fluid?
Ford Transmission :: Grinding Noise Then Shift Into Gear?
I have a f1ta 5 speed trans on my 4.9 and when i press the clutch in and shift into 1st gear it makes a grinding noise then goes into gear after a little patience. but if i press the clutch and wait a few seconds, then shift into 1st its fine and goes right in.... maybe syncronizers not meshing or they're worn? or could it possibly be a low fluid prob? idk, it just started happening.
View 3 RepliesGolf/GTI VII :: 1st To 2nd Gear Grinding When Let Out The Clutch Pedal At Any Speed
MK7 with 15k miles... This morning on my commute into work, I started having some clutch issues. When I would try to go into 2nd gear from 1st at any speed, it would grind when I would let out the clutch pedal. It was like it didn't fully engage and if I pushed the pedal back in and tried to get it in 2nd, it would grind. All other gears were fine. I don't drive the car hard so I don't think I torched the clutch.
Synchros? Shift Alignment if these models have that? Pressure Plate?
Lexus GS 2006-11 :: 2008 Metal Grinding Noise In 2nd Gear
I am having several issues. I got the lexus dealership to service my transmission recently. I got it back with a weird smell. It smells like body odor. I had to reach out to hendrick corporate for them to address the problem without charging me. Turns out it was the fluid they used. I could smell the smell from inside if i wasn't recirculating the air. They changed the fluid again and it still smells. Is my transmission doing this because it is too hot?
This smell was never an issue until after the first transmission service. And now I'm hearing a metal grinding sound in 2nd gear past 4600 rpm. It still shifts smooth but 2nd gear might be slipping. Something just doesn't seem right. o yea they gave me my car back with my brakes sticking after stopping in traffic. I took it back and was told my brake pads in the rear lost 2mm in less than 650 miles.
By the way this sound can be heard in 1st but is more prevalent in 2nd. It is not heard in any other gears. And when in sport mode the sound instantly stops when i shift up into 3rd.
Toyota - Celica :: 1990 - Has Grinding Noise While Shifting Into 2nd Gear
got a sweet deal on it but only 1 problem with the car. when i shift into 2nd gear there is a grinding noise, however it doesnt grind if i drive super slow... it doesnt really matter if i upshift or downshift into 2nd it will make the noise either way... also the grinding noise is only there WHILE shifting the lever into 2nd gear so its only there for a second, once the lever is shifted into 2nd gear there is no grinding noise at all...not sure if this is related but the clutch pedal also feels very lose just when its about to hits the floor...
View 4 RepliesSonata NF (2006-10) :: 2008 - Grinding Noise When Shift From First To Second Gear
I am now getting a grinding noise when I shift from first to second gear. It sounds like the two metals rubbing each other. Its not happening all the time, but for the past two days a bit frequently
I had reported this grinding noise when I turn left a month back. Was thinking because of my worn out tyres, but apparently not.
Elantra XD (2001-06) :: 2002 - Grinding Noise On Reverse Gear
My car has been making this grinding noise for the last 2 months. It happens when I put the car in reverse gear and slowly release the clutch. Rarely happens also in 1st and 2nd and 3rd and is always at the beginning of the transition when I am letting the clutch go. I do not know if it is the transmission, the clutch or any other part. I drive a 2002 Hyundai Elantra 5 speed manual transmission with over 120 k miles
Here is a link to a video I posted so you can hear the noise it makes : [URL] ....
Mazda - Protege :: 2002 - Grinding Noise At 3200 Rpm In Every Gear
I have a 2002 Mazda Protege5 and recently it will make a grinding noise at 3,200 rpm (in every gear). It sounds like you touched the side of a rotating drill on a piece of metal or something like that. The mechanic said it was my clutch but my clutch isn't showing any of the tail tail signs of it needing to be replaced and frankly I don't trust the guy. Will replacing the clutch fix this noise? Could it be something completely unrelated to my clutch?
View 2 RepliesSaab - 9000 :: 1992 - Loud Grinding Noise When Try To Put In 5th Gear
I recently bought a manual 92 saab, and in the past few days I have been having trouble with the 5th gear. The fluids are all fine and I have not put any real strain on the trans since I've had the car. It worked fine when I bought it but now when I try to put it in 5th there is a loud grinding noise as I let the clutch out. The shifter then pops back into neutral. I tried holding the shifter in 5th to see if that would work, and as I release the clutch the grinding noise gets louder and the gear does not engage at all. I am really hoping it is just a worn down part, and doesn't need a complete transmission overhaul.
View 6 RepliesGTI 337/20th Anniversary :: 2004 - Grinding / Rubbing Noise When In 3rd Gear
Just recently bought a 04 gli. When I shift in to 3rd and let off the gas there is a weird grinding rubbing like noise. It only makes the noise when it's in 3rd gear...
View 3 RepliesGolf IV / Jetta IV :: Transmission Grinding When Shift Fast From 2nd To 3rd Gear
Have a question when I shift slow from 2nd to 3rd my o2j tranny doesn't grind but when I shift fast from 2nd to 3rd it grinds it happens starting at 3000 Rpms thru 6000 Rpms. It also doesn't happen when I shift from 4th to 3rd. Have performed a tranny fluid change. Along with replacing the clutch at 1500 miles ago. The engine is AWP.
View 4 RepliesSubaru - Forester :: 2011 - Grinding Noise When Try To Engage 2nd Gear In Cold
I have a brand new (2 months old) 2011 Subaru Forester 2.5x that has a 4 cyl engine and a 5 speed manual transmission. This past week it's been cold here in New Hampshire and in the morning when I first drive the car, I have trouble shifting from 1st to second gear. When I shift from 1st to 2nd, I hear/feel some grinding noise as I try to engage 2nd gear. This only seems to happen when the car has been sitting around in the cold for a long period of time. Our garage has been cold (34 deg this AM) for the past week and when I drive out of our driveway and on our street I encounter this problem.
Normally, this problem only happens the first time you shift out of first and into 2nd. However, the other day, when it was very cold (5 degrees out) it happened several times as I drove down the street. After it happened the first time that morning, I stopped the car and drove from a dead stop, shifting from 1st to 2nd. I had problems 3 or 4 times trying to shift to 2nd. I ended up double clutching the car to avoid making the grinding sound. I took the car to the dealer. The couldn't repeat it but I didn't expect it to, because the car was warmed up and it was warmer during the day (low 30's by the time I got to the dealer that afternoon). The mechanic changed the transmission oil and checked the magnet in the pan to see if there were any metal pieces. He did not find any metal pieces. That was two days ago.
Unfortunately, every morning since then the car has had the same problem. Once the transmission has been warmed up it runs flawlessly and I have no problems shifting. I've made sure I am fully depressing the clutch for each shift. The past few days I've been taking the car out on an early morning test run and like clockwork, it has problems on the first shift into second, and it usually works fine after that. I have an appointment next week to leave the car with the dealer overnight. They will test drive it to see if they can reproduce the problem. What might be wrong? I have a workaround solution to avoid grinding the gears. I simply double clutch shift into 2nd for the first few times that I shift after the car has been sitting in the cold for a while. However, this is less than ideal for a brand new car.