Ford Super Duty (1999-2016) :: Install And Mount A Light Bar Without Drilling Into The Front Bumper Or Grill?
Any good way to install and mount a light bar without drilling into the front bumper or grill? I have a 32" LED bar I want to mount between the top of the bumper and bottom of the grill, but the mounts aren't ideal for where I want to put the light.
View 9 RepliesFord Super Duty (1999-2016) :: F250 - Changed Mounting Frame - Passenger Side Seat Fit On Driver Side?
On the F250 trucks, if I changed the mounting frame under the seat, will the passenger side seat fit on the drivers side? Basically, can I turn a passenger seat into a drivers seat?
View 4 RepliesFord Super Duty (1999-2016) :: Body Mount Bushings Shredded On Driver Side?
Need recommendation for replacement body mount bushing. Surprised to see the drivers side shredded. Poly replacement?
View 14 RepliesFord Super Duty (1999-2016) :: Metal Particles In Engine While Drilling Boost Gauge
I may have got a few shavings in the engine while drilling and tapping a hole for my boost gauge on the Y pipe. I am sure I got 95% of the shavings out but am now worried about the 5% that may have fell inside.
View 8 RepliesFord Super Duty (1999-2016) :: 2003 - Tool To Undo The Cap On Fuel Filter?
I have a 2003 Ford f 250 turbo diesel 7.3lt V/8,is there a tool to undo the cap on the fuel filter as i have problems every time i service the truck.
View 5 RepliesFord Super Duty (1999-2016) :: 2005 F250 - Front Axle Snap Ring Tool
I broke 2 snap ring plier on this thing, what is the make and model of snap ring pliers used to remove the snap ring off axle in hub ? I have some others but too beefy won't move in there. They need to be long but strong. I've heard Snap On Item: SRPC9000A works but I don't know of any Snap On guys around here and I need to get this thing done.
View 10 RepliesFord Super Duty (1999-2016) :: Mounting Warning Lightbar With Sunroof
Has mounted a full size warning lightbar on truck with a sunroof? My concern would be where the lightbar cable comes in through the roof possibly interfering with sunroof operation? The truck is a 2013 F-350 Crewcab.
View 2 RepliesFord Super Duty (1999-2016) :: Sway Bar End Link Mounting Bracket
We all know the sway bar end link problems in the early superdutys. Several years ago I installed energy suspension bushings and thought the problems were gone. Lately it started clunking again. I tightened the bolts with a breaker bar and it worked. but now it making noise again. I purchased a set of mevotech end links. Upon installation I found the problem.
Over the years of clunking the bolt hole on the upper driver side is no longer round. It has become oval shaped. I read a couple threads on here about this problem. I can't drill them out as the mevotechs have studs not bolts. Can I get the mounting bracket that bolts to the frame. Its a triangle shaped piece that the end link stud goes through. I have tried searching for it online to no avail. Whats it called?
Ford Super Duty (1999-2016) :: 2006 F350 - Mounting Extra Speakers?
I have an 06 F350 regular cab. I have 4 speakers in it but I want to add more but I can't find a place for them. Finding a place to mount extra speakers? And I'm not looking to add a subwoofer for that stupid "BA BOOM BA BOOM" music.
View 9 RepliesFord Super Duty (1999-2016) :: 2006 F250 5.4L - Mounting Second Battery Under The Hood?
I have a 2006 F-250 5.4L (6spd manual). I would like to add a second battery. It would be a purely auxiliary battery for radio use, and would be connected to a battery isolator. It would likely be a 33AH SLA, and starting capabilities are not required.
Any clean way to mount a second battery under the hood? On the driver's side, directly above the wheel well, there is an adequate amount of room for a second battery, and there are even tapped holes that seem to have identical spacing to the ones for the factory battery tray.
This leads me to believe that some version of this truck is offered with a second battery (the Powerstroke, maybe?). The local Ford stealership was all but useless, which is pretty standard. They have a solid reputation of not giving a crap about you unless you want to purchase a brand new vehicle with dealership financing.
What is the part number for a second, driver's side battery tray? I really am NOT interested in any kind of solution under than under the hood (no frame rails, or relocation to the bed).
Ford Super Duty (1999-2016) :: LED Strobe Light Mount To The Roof
I need to mount a LED strobelight to the roof of a F250 2016. not really liking to drill a hole in the roof of a new truck I thought of running it thru the existing wiring from the brake light above the rear window. Looking for info if there's a hot wire in there that I could get power from & than could just run 1 wire to a switch. How to run the wiring ????
View 4 RepliesFord Super Duty (1999-2016) :: How To Mount Flag Pole To Bed Of Truck
I was trying to figure out how to mount a flag pole to the bed of my truck. I used to use a 5gal bucket with a pvc pipe in it and poured concrete in the bucket and put it in my bed. I have seen others use their stake pockets but don't know how they kept it from falling out.
View 12 RepliesFord Super Duty (1999-2016) :: Firestone Airbags Kit 2535 Mount?
I have a sensor module mounted on the frame right where I need to put the upper bracket for the air bag on the passenger side rear . called e-trailer and they had no clue . special kit for 2011-2013 4x4 diesel 2535. What to do????
View 7 RepliesFord Super Duty (1999-2016) :: 2008 - Front Body Mount Removal?
i have a 2008 f250 4x4 i need to replace the drive side front lower body bushing and i can not get the pressed on bushing to come out what is the easiest way to get this to come apart i tried using a 4 ft pry bar and i could not get it to pop free.
View 11 RepliesFord Super Duty (1999-2016) :: Plow Mount Brush Guard Install
So I've had this WAAG brush guard laying around for a few years and figured it was time to do something with it. Of course it was bought with no mounting brackets. I had found a lower gear from a Fisher MM1 plow. Tossed the in the truck and started from there.
Broke out the cherry picker and started lining stuff up. Drilled some holes and bolted it up. It's all bolted up but I still need to take a piece of 2x3 angle and weld it to the lower plow mounts to tie the bottoms together and create a step.
Ford Super Duty (1999-2016) :: 2014 - Front Body Mount Bushing Replacement
The driver side front body mount bushing on my 2014 is gone which has the grill sitting on the bumper. I started to replace it, but the bolt is sized to the nut. ran off about 1/2 inch and that is it, it will not tighten or loosen anymore.
I cut the head off the bolt, but can not get the body high enough to remove the old bushing so i can cut the nut off flush with the rad support. Now I am trying to get the air filter box out so i can cut the top of the "nut cage" off to remove the bolt and nut out the top. but i can not figure out how it is held in.
I have the intake disconnected and the filter hat off, overflow tank hose disconnected, and two bolts holding the whole thing to the fender out, but it will still not budge. What am I missing here?
Ford Super Duty (1999-2016) :: 2015 F350 - Flush Mount LED Driving Lights
I have a 2015 F350 and with the long dark hours of driving, I want to put some auxillary lights on the front of my truck. I have a ranch style bumper on the front and I am thinking about installing a pair of flush mount LED driving lights. I was wondering, how well they work? I am personally thinking about the rigid flushmount hybrid driving/flood lights with the focused beam.
View 6 RepliesFord Super Duty (1999-2016) :: 2014 - Right Side Higher Than Left Side?
2014 Super Duty F350 CC SWB 4x4 20" rims FX4 Gas. Did some measurements today and it turns out the right rear is 1 inch higher than the left rear. The right front is 1/2 inch higher than the left front. Is this normal?
View 14 RepliesFord Super Duty (1999-2016) :: Driver Side Is Lower Than Passenger Side Front
I have a 2013 f250 6.2, I bought the truck brand new only have about 3000 miles on it and the other day I noticed that the drivers side front is lower then the passengers side front, the drivers side is about one inch lower, this doesn't seem right, also my drivers side front wheel seems to be pushed forward about one inch to the bumper that also doesn't seem right.
View 3 Replies