Ford F-150 - 1997-2003 :: New Clutch - Grinding Noise When Putting It Into 1st Gear
2000 Ford F250 crew cab 4 x 4 with 7.3. 6 speed transmission. I just had a new clutch installed and now I am have a grinding noise when putting it into 1st gear and when I change from granny to first it will grind also. I did not have this issue before having the clutch replaced. I have also just had a new hydraulic clutch kit installed.......
View 1 RepliesFord F-150 - 1997-2003 :: Can't Get The Truck Into Gear With Clutch Pushed And It Doesn't Even Grind
Well here it is I just put a new slave cylinder in my 02' F-150 and once we figured out all the little issues we were having we finally got the truck to fire up!!! Now my problem is that when the truck is running I can't get the truck into gear with the clutch pushed and it doesn't even grind. But when the truck is off it goes through the gears no problem what so ever. When we did the slave cylinder while we were in there we just replaced everything clutch, pressure plate, flywheel, rear seal, and pilot bearing. We figured that since all the shops were quoting me 800 and up for just doing the slave that since were in there we might as well do everything since nothing has ever been replaced yet. My question is why will the truck not let me shift into gears when running but no problem when off. Oh and yes the system was bled after doing the slave actually twice so far.
View 5 RepliesFord F-150 - 1997-2003 :: 2001 - Shaking In 1st Gear When Try To Release The Clutch Slowly
I have a 2001 ford f150 4x4 xlt and it seems to be shaking violently in first gear when I try to release the clutch slowly. The person i bought it from said he had a new clutch put in this year So i don't think its the clutch. What could be the cause of it before I take it in to be checked.
View 2 RepliesFord Super Duty (1999-2016) :: 1997 - Uphill 4th Gear Very Hard - Clutch Slipping?
I have a 1997 F250 heavy duty 4x4 7.5 efi. I just bought a 2003 weekend worrior weighing 5800lbs dry. When I go up slight hills in 4th gear it seems to work real hard especially on freeways, could my clutch be slipping or am I just at max tow
View 11 RepliesFord 7.3L Power Stroke (1999-2003) :: Hard To Get Clutch Into Gear At A Stop
Well, I think my clutch is falling apart. I am hearing an intermittent nasty noise coming from somewhere in the bell housing/oil pan area. It comes and goes, but seems to be more frequent lately. It sounds like a dryer that somebody threw a pair of sneakers and some rocks in; with a metallic clunking noise of something being "churned" around. As I said, sounds almost exactly like the dryer thing.
The clutch does not seem to be slipping, but I do occasionally have difficulty getting it into gear at a stop. I'm guessing that the clutch disc has thrown a hub spring, and its rattling around in the bell housing. Assuming I need a clutch; which I think I do, I need selecting one. I have no history on the clutch or flywheel, so I will assume that I need a new flywheel to match whatever clutch I get.
I can't get a stock replacement, due to the injectors/chip/etc.... I would estimate I am making about 350hp/700ft-lbs. I don't tow currently, but I may pull a car trailer in the future. I DO haul heavy loads in the bed (4,000lbs) on a regular basis. I also drive/shift aggressively, as well as shifting quickly. While I spend a decent amount of time on the highway, I also do a lot of stop and go stuck in traffic driving; so smooth engagement is important. So, no ceramic/ceramic in/out type clutches.
I do NOT want a South Bend. I don't want a super soft pedal. Also, the whole pedal-sticking-to-the-floor thing they mention is unacceptable. Personally, I think they should be ashamed of themselves for putting out a product with such an obvious unsafe design/engineering flaw, and then try to explain it away as "normal". Nope. They need to go back to the drawing board and fix that. As I said, it constitutes a serious safety hazard.
Ford F-150 - 1997-2003 :: 1999 - Type Of Fan Clutch Fluid?
What type of fan clutch silicone fluid is used in case you need to replace some during removal?(99 ford f150 5.4 vin L)
View 5 RepliesFord F-150 - 1997-2003 :: 1999 - AC Clutch Would Try To Spin But Very Intermittently Now Dead
How can I determine if my compressor is bad or is the solinoid/clutch bad. Truck had sat for about 9 months-1yr. A/C hadn't been operated for an additional 5-6 months. It worked like a freezer before I parked the truck. When i started the truck back up and tried the a/c the clutch would try to spin but very intermittently, now not at all. What direction should I go?
View 9 RepliesFord F-150 - 1997-2003 :: 1999 - Idle Hangs When Push The Clutch In While Coming To A Stop
I have a 1999 f-150 4x4 4.6 5spd manual 180,000 miles on the clock. My question is, when coming to a stop i push the clutch in an the idle hangs at about twice what it should be until i come to a complete stop then it drops to normal. It's not like somethings sticking cause it will stay at the high idle as long as were rolling but as soon as the wheels stop turning it drops down.
View 2 RepliesFord F-150 - 1997-2003 :: 1999 V6 Will Rev Real High When Press The Clutch While Sitting At A Light
I bought this truck for work and all of a sudden it will rev real high when I press the clutch in to switch gears or when sitting at a light. I stopped at a parking lot and popped the hood and tried to pull the throttle back by hand but it will not go. There is a lil slack in the throttle cable but when the truck is off and I manually pull the throttle back it returns normally.
I was wondering if the little black electronic box opposite where the throttle hooks to the throttle body is making it rev so high? I really don't know a lot about these newer trucks as I have driving older trucks my whole life so probably using wrong terms...
Ford F-150 - 1997-2003 :: 1999 - No Power In Gear
I have a 1999 f150 with a 4.6L 2wd 278k miles. I got this truck from my cousin about a year ago and it ran ok but not much power. It sat a few months and I tried to start it and nothing. I replaced the fuel filter and pump and battery. It starts but runs very rough. I then replaces both coil packs, plugs and wires. It idles rough but seems to run fine in park besides some popping and shuttering when I give it gas until the rpms are up around 3k, it smooths out.
I put it in gear and it completely looses power and barely wants to move. Only code that showed was the egr, I removed and cleaned and no change besides no codes at all now. it still will barely move. I have looked for any vacc lines that might have came off but do not see any out of place. the heater core has been bypassed and exhaust has leaks from someone welding on new exhaust and not being able to weld good. Also it smells like it is running rich.
Ford F-150 - 1997-2003 :: 1999 - Stuck In Second Gear - Shaking / Misfiring And Stall Out
I have a 99 f150 with 171xxx miles and the other day it suck in second gear and start shaking and misfiring and would stall out. I took the truck and got the codes read and it threw codes for the tcc solenoid and shift solenoid. I put both in the transmission and it kepy doing the same thing. I check fuse 24 under the hood and it was blown, I replaced it and everything worked fine for a day then it blew the fuse 2 more times and i cant figure out why it is blowing that fuse. I cant find any shorts maybe pcm??
View 5 RepliesFord F-150 - 1997-2003 :: 1999 Truck Only Drives In 2nd Gear After Hitting Mud Puddle
1999 f150 5.4 it's been over 3 months since It happened I hit a pretty big mud hole and right after it starts bogging and running rough and won't drive I made it home and second and I've been driving it around town in second gear since. I've been trying different things since it happened, It runs rough in drive, reverse, neutral, and first (towing gear) but revs up just fine in second (towing gear).
So far I've
- Checked all fuses
- Changed plugs checks coil packs
- Dropped pan changed tranny fluid and filter
I broke a heater core line so I replaced the intake manifold and got a good look at everything and cleaned it out
- Cleaned throttle body
- Checked all connections
- Checked all vacuum hoses
- Replaced maf sensor
- Pulled the codes but I don't have them handy.
Ford F-150 - 1997-2003 :: 1999 - Transmission Stuck In High Gear And Bogs The Motor Down
I have a 99 F150 4x4 with the 4.6 Motor approx 150000miles. Transmission went out so I decided to try and replace it...
New/rebuilt tranny went in with no problem but something is not right. It will drive but seems like it is stuck in high gear and bogs the motor down. It is giving me error codes P1747, P0750, P0755, P0743, P0102. All the wiring harness is in good shape with no burns or other noticeable problems. Somehow the transmission isn't reading right?
When I bought this rebuilt transmission I was told it was set up for 2wd but he would convert it for 4wd. The only difference i noticed with the new tranny is the shaft coming out of the tranny, where the safety neutral switch is, has a diamond shape instead of the oval shape that connects the shifter cable. No big deal i think, just had to buy a new link for the shifter cable with the diamond.
Also on the passenger side of the tranny there is a nine pin plug. My wire harness from the truck has one pin hole that is opposite of the tranny. Not sure why. Do I need a new harness or wrong tranny?
Ford 7.3L Power Stroke (1999-2003) :: 1997 V8 - Right Side Exhaust Tick When In Gear And Under Load
I only hear it in gear under load so I can't stick my head under the hood to pin point it. I dont see any black streaks and I replaced the EGR tube. Is it commonly just the gasket or do the manifolds crack? If they crack where?
View 11 RepliesFord Super Duty (1999-2016) :: V10 Knocking Seems To Double Tap Sometimes
I have a 6.8l V10 that ..... seems.... to be knocking. I am used to hearing v8 knocks but not so sure about a v10. The knock seems to double tap sometimes. Could this be a bad valve or lifter instead? Video is linked.
Also oil pressure seems to be fine.
[URL] .....
Ford Audio/Video System :: 1999 F250 - Double Din Install?
1999 F250 ... I am going to upgrade my stock radio with a Double Din touch screen unit. I have read that there is some modifying to the dash to get these units in? What is involved?
Features I am looking for.
Touch Screen
Bluetooth
DVD/CD
Rear view camera ready
Aux jack
I have looked at Pioneer AVH units...
Ford F-150 - 1997-2003 :: 2001 - A/C Clutch Not Turning On?
My AC clutch is not turning on. I do not have any AC gauges but if I unplug the compressor and put a meter on the 2 harness pins, I do not see any voltage when truck is running and AC on. I really don't know much about AC but I am thinking the problem may possibly be the low pressure switch or possibly low on freon. How can I check if I am low on freon without gauges? Where exactly is the low pressure switch located on my truck and if I jump the switch and the clutch kicks on, does that tell me that the problem can only be the low pressure switch or low on freon. I'm just trying to work through a few of the gremlins.
View 14 RepliesFord F-150 - 1997-2003 :: AC Compressor Clutch Broke
I have a 01 f150 4.2L and a while ago the ac compressor clutch broke. I didn't catch it in time and the stress it caused on the belt broke the power steering pump pulley. So I replaced the steering pump and pulley and the compressor the accumulator/dryer and the office tube put the 134a back in and everything worked fine. three months later ac stopped working. I figured the condenser was bad so i replaced it. Charged it up still no cold ac. so i thought maybe the manifold that goes on the compressor was clogged so i replaced it. While I did that i said to myself well i should tear out the dash and replace the evap as well. so just about everything has been replaced on the ac system.
Aside from the cycle switch and the high side switch witch from my test both seem to be working. now here is the thing. the tube witch holds the office gets ice cold then goes to the evap but the suction line coming from the evap doesn't get cold and the ac blows warm air. this very problem is what convinced me that the evap was clogged and needed to be changed witch is why i undertook the task of tearing the dash out. in all it took 14 hours to do the whole job. now for the pressures that i get from the ac manifold low side goes 40 down to 20 ..... this is normal. high side is a little high. I charge it to 125 still no cold air. so i dump a little more 134 in. at 90 degrees high side pressure should be around 200ish i get it there still no cold air. I have just about replaced everything i can think of.
Ford F-150 - 1997-2003 :: M5OD Clutch Not Disengaging
My buddy and I just rebuilt a 4.2 V-6 and stuck it into a '97 F-150 RCSB 4x4 which somebody gave him. It had been sitting with a bum motor for about 7 years. While the engine was out, we also installed a new clutch, pressure plate, throwout bearing, etc. We got the truck running yesterday by pull starting it (battery is not holding a charge).
The clutch does not seem to be engaging, as I had to pull the shifter out of gear so that the truck would not stall. The clutch does not seem to have a lot of pressure, but the slave cylinder is full. Is there a way to bleed these clutch systems? Is there anything else we should look at? I have not dealt with the M5OD before, and neither has he.