Ford Excursion :: Hellwig Sway Bar Links Work With Oem Sway Bar?
Can the hellwig sway bar links will work with an oem sway bar? I need new ones and figured why replace with something I know will fail early...
View 3 RepliesFord Excursion :: Clunking Noise - Front Sway Bar End Links
I plan on replacing as I have a clunk happening. Thought I'd try here first.
Is there a brand that's better? 1Aauto has OEM. Is there a brand that's better or makes a difference?
Or is a front sway bar end link a front sway bar end link?
Ford Excursion :: Correct Length Of Front Sway Bar End Links
What is the correct length of the front sway bar end links. I need that info to order replacements for my 04 X EB 6.0 4x4. I just don't want to wait another day.
View 3 RepliesFord Excursion :: 2004 F350 - Front Sway Bar Links Keep Wearing Out After 3 - 4000 Miles?
My 04 6.0 Limited and both front and rear sway bars. The front links keep wearing out after 3-4000 miles. But, I saw someone in here put F350 Sway Bars in their Excursion? REALLY?? Is this right or is this snake oil? Is their another way to fix the front links so they don't wear out so quickly??
View 4 RepliesFord Ranger / B-Series :: 1993 - Front Sway Bar End Links?
I'm new to the whole Ranger truck thing since buying a 1993 Ranger 4x4 for my 14 y/o son. It has a 4 inch suspension lift and a 3 inch body lift running 33x10.5x15 tires. The front sway bar is not hooked up. I know that i will need drop brackets for the sway bar but my question is about the end links needed for this truck. There are 2 tabs with provisions for a horizontal bolt on each side of the twin I-beam where the end link would attach and the sway bar has a single horizontal hole on each end. Searching for replacement links at various auto parts websites only seems to yield the standard end links that consist of a straight bolt with a nut on each end and the rubber insulators. That clearly is not the correct end link for my application. Not sure if the front suspension is the factory installed unit or if it was swapped some time in the part.
View 4 RepliesFord - Explorer :: 2000 - Front Sway Bar Links Coming Apart?
One is coming apart, so I'm gonna replace the pair. My Chilton book says to jack the front end up. The part instruction sheet makes no mention of doing that.
Raising the front would allow the control arms to hang. That would seem to me to make it harder to deal with the links.
Ford 7.3L Power Stroke (1999-2003) :: Sway Bar Links Not Correctly Lined Up?
So putting the new extended links on my truck, not sure if they are supposed to be seated flush on both the frame and sway bar itself before tightening them down. This is how they are sitting now --
You can see a little gap between the rubber fitting where the bushing sits and the frame mount. Just wanted to make sure before I torque it down. Its the same on the other side as well. They are sitting flush on the sway bar.
Ford Super Duty (1999-2016) :: Greaseable Sway Bar Bushings And End Links
I have a 2002 F350 4x4 CC 7.3 i am wanting to change the sway bar bushings front and rear to poly and I want greasable bushings to avoid the squeaking that you get with these bushings alot of the time. I would like to change the end links to poly too i realize these wont be greaseable. What was the outcome and where did you buy the bushings. What is the size of the front and rear sway bars and the length of the end links??
View 14 RepliesFord Super Duty (1999-2016) :: Sway / Stabilizer Bar Links Rattling?
I'm on my second set of links. The replacement were Dorman 3 years ago. They are rattling again. Do I just replace them again? I forgot to add, the bushings were replaced this year.
View 1 RepliesHonda - Cr-v :: 2005 - Loose Sway Bar Links
The Honda dealership told me my 2005 CRV has loose sway bar links. How are these fixed? They quoted a price of $290 for the front links and $374 for the rear links. Does this sound reasonable.
View 14 RepliesCamry :: 2005 - Change Front Sway Bar Links?
I want to change the front sway bar links on a 2005 Camry that has been driven in central New York (ice, salt, corrosion) for 10 years. There is definite wiggle and noise. I recently replaced the ball joints. That was difficult. How difficult is it to remove the sway bar links? Looks like a 5MM or so allen wrench is supposed to hold the ball joint type link to allow 18MM nut to be removed. A 5MM allen wrench is about 4 inches long and skinny. An 18MM wrench is about 12 inches long and beefy. I am skeptical about breaking the nut loose.
Will I need to heat the nut? If yes, how? With a simple propane torch? If yes, how does that work? Apply heat and wait for a sound that indicates the rust has broken? Apply heat for a time, try to hold with the allen wrench and try to undo the nut? Keep trying that again and again until it works? This would be after multiple rust busting spraying to make this easier. I used a 4 inch grinder to grind the nuts off the ball joints to remove them (I know how that sounds, but that is what I did). Thoughts about that for the sway bar links? I am a bolt turner who can stand some aggravation.
Prius (Gen 2) :: Front Sway Bar Links Making A Bad Noise
Both of my front sway bar links have a bad joint and are making a bad noise.. I purchased the replacements and tried to loosen the nuts with no success. I put some oil to loosen them and will let them set over night. Next attempt will include a breaker bar.
View 4 RepliesAlignment :: 2000 - Changing Rear Sway Bar End Links?
My car is a 2000 Corolla CE.
If I replace the rear sway bar end links, do I need to get an alignment? (I just got an alignment 2 days ago). Here is a DIY on replacing the rear sway bar end links: [URL]
The top attaches to the strut.....what is the bar the other end attaches to?
Sonata I45 (YF - 2011+) :: Rear Sway Bar And Links Installation
I just installed rear sway bar & links, this made a world of difference in the way the car handles as soon as I made the first turn I could feel the difference in the car it definitely corners flatter, the install only took about an hour did it in the driveway on ramps, I installed the kia sway bar 555102T000 the bar is 18.3 mm while the stock one is only 15mm I included some pics...
View 8 RepliesJetta - Volkswagen :: 2002 - Broken Sway Bar Links
My mechanic says I need to replace both front sway bar links on my 2002 Jetta....I am, of course, hesitant to do it at this price. How critical is it to replace? Can I get junk yard sway bars to make it cheaper? And can I do it myself (have no experience fixing anything....
View 11 RepliesFord Excursion :: Loud Clunk / Thump Sound Coming From Rear Of Vehicle
Our excursion usually sits unless we are towing or need to haul a group of people. The past three days my wife has been using it as a commuter. Yesterday she told me that two times at start-up she has heard a loud clunk/thump sound coming from the rear of the vehicle. At first she thought it was happening when she engaged the brake to put it in drive. Today she called me and told me the sound came just after start-up while the vehicle was warming up before the brake was applied. What this could be? I wish I would have observed it so I could give more details.
View 2 RepliesFord Excursion :: 2005 - Loud Clunk Or Pop Noise From Under Driver And Passenger Floorboards
I have a '05 4X 6.0 PSD... that has a loud clunk or pop noise from under the drivers and passengers floorboards. I've done A LOT to try and fix this noise... and know, it's definitely due to frame twist. As I can drive straight, on flat ground and it'll never happen. On a dirt road, with stutter bumps... still, nothing. When the road is off-camber, or I have an S-Turn the CLUNK will be there, and sometimes more than once (seemingly if the load change is enough).
If I'm off-road, and the road is off-camber or has my X articulating 1-2' in either direction side to side or diagonally, the CLUNK is so annoying, so bad, I think the X is going to fall apart.
So this past weekend, I had my fiance' roll back and forth (about 20') over a small dirt embankment, while I was on my hands on knees outside next to the running board. And boy... it's a LOUD clunk, and I can feel it on my feet in the X... or if I put my hand on the frame. But, for the life of me... can't find the culprit.
Tiguan :: Front End Clunk - Sway Bar Bushings?
My Tig has been doing a sharp clunk (single) for awhile when going a bit too fast over speed bumps. I just ignored it, as I'm not flying over bumps regularly and I had just replaced the OEM struts all around. Now when accelerating over 60 kph the car has a side to side shimmy. Also when compressing or unloading the front end suddenly, like with dips on the road, makes it clunk. Checking the various suspension components?
View 6 RepliesFord Excursion :: Sway Bar Down Link Keep Loosing?
I am having difficulty with my front sway bar downlinks, they keep coming loose. I have recently replaced them for the same reason with some O'Reilly Auto Parts house brands, they seemed alright when compared to the Motorcraft replacements, they even had grease fittings which was unusual for some of the others I have seen. I have torqued them down, I have tried red locktite, the only thing I have not tried is to weld them. It is only the lower nut which keeps coming loose.
View 9 Replies