Ford Transmission :: 1967 F250 - Clanging Noise And Popping Feel When Clutch Engages
I recently changed the clutch in my 1967 F 250, all was golden. This was about 5 months ago , just the other day when going from 2nd to 3rd gear there is a clang and popping feel. the truck was making similar noises before the clutch blew out causing me to change it last time.
View 1 RepliesFord F-150 (2004-2008) :: Grinding Noise From Rear Side When Brake
Every time I brake, there is an awful grinding sound in the rear of my truck. It doesn't seem to be affecting the brake strength, however something is obviously wrong. I have looked at the brake pads and they seem to be in good shape. I am a mechanical misfit, but I hate getting ripped off by other people at the brake shops.
2005 F150 Crew Cab, 5.4 V8....
Ford F-150 (2009-2014) :: 2010 - Rubbing / Grinding Noise From Rear End
Just got a 2010 lariat supercrew...I put 1900 miles on it so far. When slowly letting off the accelerator (doing between 20-30 mph and between 1000-1500 rpm) there is a distinct rubbing sound for about 1-2 seconds...it is now sounding more like grinding now...took it to the shop today...(they couldn't duplicate (because service rep documented 60 mph instead of the 20-30 mph...went back at the end of the day to ride with the tech, and i was able to duplicate so now they have something to work with....also the noise happens mostly when the path of travel is either level road or slight to great incline..it has not happened on a down slope....
View 14 RepliesFord 6.7L Power Stroke Diesel :: 2012 F350 - Loud Grinding Noise In Rear End Like A Brake Locked Up
Just over 7000 miles all of a sudden I got this loud grinding noise in the rear end like a brake locked up. Pulled into a parking lot. Don't think it's brakes. Put the truck in reverse it got even louder for a second then it quieted down after that. Naturally this happened on a Saturday.
View 6 RepliesS-10 :: 1998 2WD - Grinding Noise In The Rear
My 98 s-10 2WD 4 cyl with 135K miles has been making this grinding noise in the rear. Sounds exactly like grinding from really worn out brakes.
video 1 with wheels on [URL] ....
video 2 with drums off [URL] ....
I can't tell where it's coming from. Both sides equal so I'm suspecting differential. Shop looked at it and came up with bad U-joint and recommended differential service. I fixed the u-joint. Fluid level ok in differential.
Golf V R32 :: Metal Grinding Noise In Rear
For the last week or so been noticing as I'm slowing down, brake or no brake, a metallic, grinding noise coming from the rear passenger side. Does not sound like a humming worn wheel bearing noise. Its pretty loud, almost clunky and not always consistant. Then the last day or so have noticed it on the right side. At higher speeds....faintly hear a ticking... The car has 48K on it.
View 2 RepliesBmw :: Rubbing / Grinding Noise From Rear Right Wheel
I just recently I have been experiencing a rubbing/grinding noise from the rear right wheel, also it has made a clonking noise like a flat tyre but it isn't, I can hear the noise from about 25/30 mph when I go faster or slower i cant hear the noise.
View 2 RepliesHonda - Cr-v :: Grinding Noise From The Rear When Decelerating
I have a 2000 reg Honda CRV and when the car has been run a few miles there's a grinding noise from the rear of the car, especially when decelerating it sound like the axle.
View 8 RepliesFord A/C :: 1996 Econoline - Warm Air At Idle
I have a 96 E-350 7.3 PSD. I noticed that the A/C seems to work well on the Highway but not so well stopped Idling. I thought maybe it was airflow so I replaced the Fan Clutch... Seemed like it was better for while (could have been my imagination)... I decided to evac the system and refill. The system takes 4 lbs of freon. The van was indeed low so I thought I had found my problem, but it didn't seem to work after evacing and refilling.
With gauges on the system the low side pressure when it was 80 degrees out this morning was 70 and the high side was 145. A/c temp from the vents was about 70.. If I raised the RPM's to about 2k, the low side would drop to around 30-35 the high side would stay about the same... and the AC in the Cabin was in the 50's...
Does this problem have to do with air flow over the condenser, or is possible that the compressor is getting tired. (The compressor stays on the entire time) Could it be a clogged orifice?
Camry :: Grinding Noise From Rear If Push The Car A Little Bit When Parked
I have a 2007 Camry I4 AT. I searched and most mention noise coming from brake, etc. I don't see noise being mentioned when car is parked.
With my Camry in P, if I push the car a little bit, even just getting in or out of the car, I can hear a metal grinding noise coming from the rear of my car. The brakes looks okay. If I engage the foot brake, the noise reduces but does not go away. The noise seems to come from the bottom rear.
Hyundai :: New Rear Brakes Making A Grinding Noise Around 15 - 25 Mph
My car came back from the shop yesterday with new brakes and pads and seems to be making some odd noises, both at low speeds and while breaking. I called the shop this morning and they said that this sound was normal for awhile but to come back in a week if it persists. Is this sound advice, or should I be driving my car right back to the shop?
2005 Hyundai Tucson 122,000 miles
Golf IV R32 :: Grinding Noise Coming From The Rear When Slow Down
So I'm driving to work and as I slow down to pay the toll I hear a weird grinding noise from the rear (sounds to be rear right) get out and check the crime scene. The plate is not rubbing on the rotor and there is nothing stuck between the rotor and the plate, so then i check the pad and they look pretty low, check the other side and looks the same, check the front and they r good n meaty. So can this mean I need new pads? The grinding noise goes and the car goes, the faster i go the faster the grinding noise goes, as i slow down it slows does..
Wanna make sure I get the problem right so I can fix it since I'm doing a Haldex oil service cause I also have the binding noise and then i gotta get the coolant flush done... hope all I need is pads... The noise goes away when I brake.
Elantra XD (2001-06) :: 2003 - Grinding Noise From The Rear
2003 Elantra GT ... Yesterday I went out and heard a sort of grinding noise from the rear. I thought it was the brakes. This morning I took it to a mechanic and he said it was the brake pad rubbing on some rust on the rotor.
This evening my wife took the car out and, in addition to the sound, said she smelled burning rubber. So I took it out and after a while figured out it is the bottom of wheel coil (see photo) on the rear driver side rubbing against the tire! I assume the mechanic didn't spot it because it may move out of contact with the tire when the car is lifted up. What happened here?
Ford - E250 :: Adding Head Rests To Econoline?
We own a 12 passenger Ford Econoline and would like to add head rests to the bench seats. We have 4 children; 3 in car seats and 1 in a high back booster, but she's quickly outgrowing it, and I don't want to take her out of it until there's something there to support her neck in an accident.
View 3 RepliesTouareg :: Slipping / Grinding Noise On Rear End Mostly On Sharp Turns
I have noticed that when I turn my wheel on my Touareg, mostly sharp turn, I get a slipping/almost grinding noise. I am planning on driving cross country next week and this has me worried.
View 13 RepliesCivic - Honda :: Grinding Noise Coming From The Right Rear Wheel
My '98 Honda Civic hatch is making a rubbing or grinding type noise that seems to be coming from the right rear wheel. It only happens when I'm making a speedy left turn and is made worse when there's lots of weight in the back seat. My boyfriend who mostly knows what he's doing checked the wheel for play and any grinding of the wheel bearings and he thinks the bearings are fine. We also checked around the wheel for foreign objects and any obvious issues i.e. pieces of the car hanging off.
View 3 RepliesKia - Sportage :: 2009 - Rear Brakes Making Grinding Noise
I have 23, 400 miles on my Kia Sportage 2009 and just found out I need to replace both of my rear brakes.They were making grinding noise. Is this a defect? Seems like low mileage to have to replace them?Also my front brakes are down to 50%. Is this a known KIA issue?
View 4 RepliesTransmissions :: 1995 - Chevy Rear End Differential Grinding Noise
I bought this van (1995 chevy van 20) last year and the rear end made some sounds but not as bad as its now.
So, after buying it I decided to open up the rear end and inspect for any damage to suggest it needs repairs. No signs of metal chips, nicks, or any wear on the bearings and gears. After a while of driving it I decided to remove the carriage and pinion from the rear end to give it a close inspection. After doing this and finding no clear sign of war or damage, i decided to replace the carriage barrings to see if that made a difference. After placing the new bearings back on the carriage, pinion back into the rear differential, and trying to do it all by myself, i lost the marks i had placed on the carriage bolts and clamps since I had little time to get it back together.
After that I had no other choice but to place the clamps bolts where i could estimate they belong. I was done, then drove it and some of the noise went away but a grinding sound on decelerating emerged. Well, now that sound is gotten worst and its more like a grinding sound. I can assume that not placing back the bolts and carriage clamps back changed the position of the carriage relative to where it was, but am not 100% sure. how can I correct the positioning of the carriage? if that is not the issue what test can i perform to find the culprit?
Ford - Econoline :: 1997 - How To Open Hood With Broken Latch
I have a 1997 Ford Econoline conversion campervan that I don't use very often. I need to open the hood to jump start the battery. Last time I opened the hood I did not notice anything wrong with the hood or the hood release latch inside the cab. Now when I pulled the hood release latch inside the cab, nothing happens to the hood at all (the hood does not open at all). Is there a way I can open the hood or do I need to tow it to my mechanic?
View 4 Replies