Ford 6.7L Power Stroke Diesel :: Got Message Check Coolant Additive?
The other day I got the check coolant additive message. I've heard that you need to test this every so often. My truck has 67,000kms. so maybe 45,000 miles ?? Anyways.. At first I thought it was a LOW coolant message not reading it thoroughly the first time.. So I was quick to check the coolant level. The level in the drivers side looks ok but the passenger side seems a bit low. I can't not see any leaks what so ever. So question 2. Are both overflow reservoirs or is one for this coolant additive.
View 14 RepliesFord 6.7L Power Stroke Diesel :: Check Coolant Additive Message
OK, just about to turn over 17,000 miles on my 6.7 and got the message to "Check Coolant Additive". So I came here and did a search, read a bunch of post, gained a little information, but not enough. You know how it goes with the subject gets off track and never comes back to course many times.
So my question is, do I purchase the kits, from what I read it would appear that there are two different test kits required.
Or do I just take it to the dealership and have the test performed? Also from what I have read it would appear that this is a timed message response and not an actual computer generated test...correct?
Ford 6.7L Power Stroke Diesel :: Check Coolant Additive Message
Got a "check coolant additive" message in my message center, but the owner's manual isn't too useful explaining what it means or what I should do.
View 9 RepliesFord 6.7L Power Stroke Diesel :: Check Coolant Additive Message While Driving
Driving to work this morning and I get a notification "Check Coolant Additive". Sure, I've got 12,100 miles on it but come on. Dealer dip a test strip in the coolant to check it out. He says it only takes a few minutes to check provided the engine isn't too hot. I guess the "coolant additive" is something that the computer monitors to make sure the coolant is still good.
View 14 RepliesFord 6.7L Power Stroke Diesel :: Message Center Says Check Coolant Additive
I called my servicing dealer and he was unaware of the message or how to check/test this. He also did not think it was a warranty issue.
View 14 RepliesFord 6.7L Power Stroke Diesel :: How To Reset Check Coolant Additive Message
How do I reset the "Check Coolant Additive" message. Pressing OK turns it off until I restart the engine.
View 4 RepliesFord 6.7L Power Stroke Diesel :: 2011 F350 - Coolant Additive Check Message
Got the warning on the message center.. 2011 F350 38,000 miles. I am not original owner, has lifetime POWERTRAIN so thinking of letting dealer handle this,,,but..?
With the importance of these cooling systems.. and coolant being in there for approx. 60 months.. I am thinking why pay for test kit or pay dealer to test it and add additive...
I guess I could just buy the oem coolant and distilled water and drain & fill it myself... but can I use garden hose to flush? Or just better to let FORD handle it?
Ford 6.7L Power Stroke Diesel :: 2015 - Check Coolant Additive Warning On Display?
My 2015 F350 6.7 has 13,400 miles and displayed the check coolant additive warning as I pulled into town from an 850-mile round trip this weekend. If the radiator in 2015 is still the same as the one used in 2012 etc discussed in another thread?
I will call my local dealer tomorrow. I do not see any obvious leak at this point. I had the oil changed before taking the trip and assume all fluid levels were checked.
Ford 6.7L Power Stroke Diesel :: Stop Check Coolant Additive Display Every Time When Start The Truck
How does one clear the computer to prevent the display "Check Coolant Additive" from appearing every time I start the truck. I know that a chemical test is needed to determine the status of the coolant.
View 2 RepliesFord 6.7L Power Stroke Diesel :: Exhaust Filter Clogged Message On Display
My truck started to display exhaust filter clogged and cleaning exhaust filter multiple times today. The cleaning exhaust message stayed on until I hot OK and then it comes back later. Not sure what this means?
View 14 RepliesFord 6.7L Power Stroke Diesel :: Trailer Brake Module Fault Message On Display
Brought my truck (2012 F350) for recall service for one of the faulty exhaust temperature sensors. It took them one week to replace the sensor (!), then when I came to pick it up I got: "Trailer Brake Module Fault" message on the display.
I have never seen this message, since I own the truck (I am original owner). The service adviser said it will take a minute to reprogram the module and took the truck back to the shop. Came back after a while, saying that it didn't work and I need to leave the truck, so another technician can work on it tomorrow. Tomorrow came and I got the call that they reprogrammed the module, but the message still shows up, so they need to work on it (another day!).
As of now they still don't know what is going on. Apparently they broke something while replacing the EGT sensor and how to fix it.
Ford 6.7L Power Stroke Diesel :: Check Back Up Sensors Message
Nothing mechanical, fuel filter change and coolant check. While its there I am going to have them look at a few things:
1. Back up sensors - they work intermittently with a message that comes up saying "check back up sensors" or something to that affect on the display. The icon on the display that lets you check off or on will not let you put a check mark next to "on" after you push the "OK" button to get out of the check message. There is nothing coating the bumper/sensors (mud or anything).
2. Blinkers - sometimes, out of the blue, my left turn signal comes on and it doesn't like to go off. I have to push the blinker wand down to the second full position then back, or repeat if it comes back on. It is almost always the left blinker. It also happens sometimes when I start the truck.
3. Windshield wipers - sometimes if I go from the remote start to key power in the morning I get the windshield wipers going. So I will turn them on with the dial and back off. This is pretty rare.
4. The Ford emblems are starting to corrode.
5. I might have them look at the cruse control - sometimes I can get the light to come on the dash and go to green when I push the + button, but it doesn't hold the speed. I have to shut the truck off and restart all the electronics for it to start working again.
How to check the back up sensors? My gut tells me with the rest of the issues that unless they can repeat and verify my "complaints" they won't be able to do anything. There probably isn't a code thrown for the blinkers going on at will. Is there anything I might be able to do to fix it? Or do these issues require parts being replaced - which we're back to square 1 with being able to verify what it's doing at the dealer?
Ford 6.7L Power Stroke Diesel :: Check Park Aid Message At Startup
Get the message every time at start up and won't go away. It doesn't seem to be working when I back up near something. If one sensor goes does the whole system shut down? Also It won't let me check the "ON" box for the park aid.
View 6 RepliesFord 6.7L Power Stroke Diesel :: Low Fuel / Power Message Then Check Engine Light On
My low fuel light came on tonight. I drove about 2 miles, stopped and shut the truck off. When I restarted it and began to drive off to the fuel station a notice came on that isaid power reduced then a check engine light came on. I was about a mile or less from the fuel station so I filled up. I cycled the key but the engine light is still on. No low power message tho. The power is fine.
I came home and drained the water drain on the filter, didn't see any water but hoped it would solve the problem. I cycled the key a few times and started the truck but the light is still on. My truck is a 2013 f350 6.7 and has 211500 ish miles on it. I bought it a month ago with 18500 miles and haven't had any issue until tonight. My only thought is maybe the fuel filters need changed. I don't know if or when the previous owner changed them.
Ford 6.7L Power Stroke Diesel :: Reset Check Coolant Additive Notification
How can I turn off the annoying Check Coolant Additive notification? I won't be taking the truck in for service for another week and don't want to look at and acknowledge it every time I start it up until then.
View 5 RepliesFord 6.0L Power Stroke Diesel :: Engine Coolant Blowing Out Of Coolant Reservoir
I have coolant blowing out of my coolant reservoir when ever i hold it to the floor it does it with or without the banks programmer... 6.0L power stroke...
View 14 RepliesFord 6.0L Power Stroke Diesel :: Front Of Truck Covered In Coolant - No Coolant Pressure - Fix?
Well got home and the front of the truck was covered in coolant. I must have driven 2 hrs after I noticed no coolant pressure, but temperature was great so figured it was another crappy cap. Looking to get a quick turnaround. Need to go out of town for work Saturday so I have this week to get it done.
Just put a stock unit back in? I don't think I need to do anything else in that area. Belt/pulleys/radiator all done last spring.
Ford 6.0L Power Stroke Diesel :: Coolant Flush With Thermostat And Coolant Filter Install
This weekend my friend and I plan on doing a coolant flush, new Mishimoto thermostat housing with high temp thermostat and install a Mishimoto coolant filter.
Truck currently has some unknown green coolant in it and Im going to replace it with Rotella ELC. I plan on doing a couple hose water flushes then follow with about 5 distilled water flushes. I've been reading about putting some Cascade in on first flush to dissolve any silicate goo that might be in there hanging out. I might give that a try. Im sure I can manage this part from all the stuff I read about doing flushes.
This is the part that looks like a little more work involved than the flush. Doing the thermostat kind of worries me because of the tight area in there to work with the fuel line and the EBP sensor being right there. The current thermostat holds temps around 175-185 under normal driving. I bought the new Mishimoto thermostat housing with the high temp thermostat installed in it when they had their pre sale going on for the housing.
I decided to just go with the whole thing because of all the stuff I read about people having issues with the thermostat not fitting the older housing correctly since Im certain I have the original housing from 2004, like everything else that's still original on my truck. I plan on removing the thermostat before doing the flushes and then installing the new housing and thermostat and coolant filter before I add the ELC.
The coolant filter install looks fairly simple to do so I should be ok with that.
Ford 6.7L Power Stroke Diesel :: Got Message - DEF Under 1/2 Full?
My truck gave me the message that "DEF under 1/2 full", so since we are on the road, I stopped by a dealer and picked up 5 gallons of motorcraft DEF. I did not want to get the countdown message in an unfamiliar area and have to look for it. While going out site-seeing, I forgot and left it in the back seat of the truck for about 8 hours in the heat of the day. I know you are supposed to store it under 86 degrees or so. Now, did I just ruin 5 unopened gallons or is it still safe to use?
View 9 Replies