Ford 6.0L Power Stroke Diesel :: Engine Does Not Crank - No Coolant In Reservoir
I did not run the truck for 5 months and the engine will not crank. I charged the batteries but when I turn the key nothing happen, I hear the glow plug system going but nothing else, starter does not click at all.
One thing that scares me is that there is no coolant left in the reservoir and I am scared that it went in the engine. I did have to add coolant last summer.
How can I first test the starter? Can I turn the engine by hand? If I push the truck, does the engine turn and can I tow it without damaging the engine if it is hydrolocked?
Ford 6.0L Power Stroke Diesel :: 2004 - Coolant Reservoir Empty / Leak Coming From Rear Of Engine?
While servicing the bosses 121k 6.0, I noticed the coolant resevoir empty. It took 1 1/2 gallons to bring to proper level. Returning under truck to install drain plug, I noticed coolant coming from rear of the engine(right side). And of course Ford has changed the cooling system cap, so I wasn't able to pressure test it to pinpoint the leak. Started the engine and seen coolant coming from the left rear as well. I've been reading here to see what others have been seeing, (EGR cooler, head gaskets). With all the heat shields,not much room to look.
After work I did go and buy the adapter to test the cooling system. With any luck I will be able to see leak better.
Ford 6.0L Power Stroke Diesel :: 2007 - Oil In Coolant Reservoir - Getting CEL Intermittently?
Have been working on military diesels for years. I have a 2007 Ford F-250 6.0. I am currently waiting for a new oil cooler as I have oil coming from my coolant reservoir and no coolant in my crank. My question is I have been having my engine light coming on and off intermittently since deleting my EGR cooler.
View 6 RepliesFord 6.0L Power Stroke Diesel :: Died - Reservoir Blows Coolant Everywhere - Overheated?
Traveling down the freeway doing about 80 the truck starts to sputter and then cuts off lose all power and gauges then Cuts back on rap back smoked out the back huge amount as I never seen before engine fully cuts off and lose all power no restart pull over the side pop the hood Reservoir has a blown coolant everywhere engine very hot get it towed home engine won't crank very well let it cool off more recharge batteries engine it only spent about 60 80 RPMs.
I have a fail CPS/ cam motion position sensor code coming up. Pull the valve cover and all rails off the both sides to check lifters and rods and everything seems normal and in place. My question is have I spun a bearing or is there something I went out worse checked EGR sensor and everything seems normal hasn't been steamed out or anything so I don't think it's a EGR or cooler. Also checked oil normal color no water. Also could it been a water pump going bad that made my reservoir let go and not egr or cooler?
Ford 6.0L Power Stroke Diesel :: 2006 - Won't Start - Spit And Smoke Coolant Out Of The Reservoir?
I'm new to the diesel scene and I'm having trouble here i just replaced the head gaskets and did the head studs, also the EGR delete with oil cooler done all by me at home because I'm low on cash and the truck was pouring coolant through the turbo before due to overheating and bad egr and blown head gaskets i didn't have the heads checked before i installed them because I'm broke now and I need my truck but it wont start now and continues to spit and smoke coolant out the reservoir.
View 13 RepliesFord 6.0L Power Stroke Diesel :: 2006 E350 - Coolant Reservoir Has Crack / Leak
I bought a 2006 E350 with a 6.0L diesel. Has some issues I hope to work through, or failing that I'll ditch the thing and learn a lesson.
The pressurized coolant reservoir has a crack/leak in it. Is it wise to only replace it, or should I look for a root cause? The temp gauge does not go past 50% pulling hard up a mountain pass.
This was a fleet vehicle that was pretty much abandoned. There is a chance the reservoir was cannibalized for another rig and had the bad part thrown there but I'll never know.
Ford 6.0L Power Stroke Diesel :: Smoking After Running For About 5 Minutes / Some Pressure In Coolant Reservoir
Just finished doing my own heads on my 2005 Excursion 6.0L. Turned it on with really no problems. After running for about 5 min. it started smoking. I also noticed that I had some pressure in the coolant reservoir. I toke off the cap and it stopped smoking. I placed it back one and it started to smoke again. Oil has water now. I used ford head gaskets and ARP bolts. I torqued the bolts down to ARP's specs and torque pater, 210 lbs/ft. I also replaced the oil cooler, stand pipes, stc and the dummy plugs. Also from Ford. I don't know where I went wrong.
View 14 RepliesFord 6.0L Power Stroke Diesel :: 2006 F350 - Coolant Disappearing Out Of Reservoir - White Smoke
Ok I bought a 2006 Ford F350 with 6.0 after driving for about 3 weeks I noticed a little bit of coolant was disappearing out of reservoir. So yesterday I was driving with a load Reservoir overflows replace coolant with one gallon of coolant and finish trip with no issues. I started truck today and it will not stop smoking it is also not overheating after hearing about head gaskets. I'm hoping it might be EGR cooler white smoke smells like raw diesel fuel. What to do?
View 3 RepliesFord 6.0L Power Stroke Diesel :: 1988 - Coolant Blowing Out Under Acceleration
Always regretted selling my 1988 ford diesel. It was a stick shift 4x regs cab. Very fun to drive. But I was a kid so when it developed a tranny noise I panicked and sold it. So, I bought a pile of crap in the form of a 2004 super dooty. It's a long bed ex cab, but had a stick shift!
It's got 330k on the clock, spicer rear end, and the famed 6.0. It's 4x4.. The truck isn't running and has a laundry list of engine issues including coolant blowing out under acceleration, hpop failing, weak injectors, oil leaks.
Compression is claimed to be good, but I'm thinking it would be easier and cheaper to fix up a used engine and swap it in. I'm open to other engines too, so I'd love to hear about options for that.
My research indicates that the 6.0 can be made to work well. For the money I have into the truck there is some room to invest in the engine. I have a line on a lo mile used 2006 6.0 engine. I've been told that the later years like 06 were less prone to some of the issues. Would this engine require head studs/gaskets and hpop fixes?
I'd be doing an egr delete for sure. And a coolant filter setup which is a new concept to me. What else would need to be done to bolster this engine? Turbos okay in these? I saw my friends ford burn to the ground from a cracked turbo. Or, should I put a gas engine in?
Ford 6.0L Power Stroke Diesel :: White Smoke / Steam Blowing And Losing Coolant
My 2006 6.0 is blowing white smoke/steam and Im losing coolant (not out the top). Pulled the EGR valve and its wet down there. All signs lead to EGR cooler? I've been reading a lot on this forum and Ill do the oil cooler at the same time. I seems VERY important to flush the coolant system before I tear into this. I am afraid of hydro locking the motor or ruining the head gasket or stretching the head studs if I run the truck. How can I do this without further damaging the engine? I am doing this myself. I'll have 3 solid days to finish this job because I have to tow my trailer in 5 days.
View 5 RepliesFord 6.0L Power Stroke Diesel :: Front Of Truck Covered In Coolant - No Coolant Pressure - Fix?
Well got home and the front of the truck was covered in coolant. I must have driven 2 hrs after I noticed no coolant pressure, but temperature was great so figured it was another crappy cap. Looking to get a quick turnaround. Need to go out of town for work Saturday so I have this week to get it done.
Just put a stock unit back in? I don't think I need to do anything else in that area. Belt/pulleys/radiator all done last spring.
Ford 6.0L Power Stroke Diesel :: Coolant Flush With Thermostat And Coolant Filter Install
This weekend my friend and I plan on doing a coolant flush, new Mishimoto thermostat housing with high temp thermostat and install a Mishimoto coolant filter.
Truck currently has some unknown green coolant in it and Im going to replace it with Rotella ELC. I plan on doing a couple hose water flushes then follow with about 5 distilled water flushes. I've been reading about putting some Cascade in on first flush to dissolve any silicate goo that might be in there hanging out. I might give that a try. Im sure I can manage this part from all the stuff I read about doing flushes.
This is the part that looks like a little more work involved than the flush. Doing the thermostat kind of worries me because of the tight area in there to work with the fuel line and the EBP sensor being right there. The current thermostat holds temps around 175-185 under normal driving. I bought the new Mishimoto thermostat housing with the high temp thermostat installed in it when they had their pre sale going on for the housing.
I decided to just go with the whole thing because of all the stuff I read about people having issues with the thermostat not fitting the older housing correctly since Im certain I have the original housing from 2004, like everything else that's still original on my truck. I plan on removing the thermostat before doing the flushes and then installing the new housing and thermostat and coolant filter before I add the ELC.
The coolant filter install looks fairly simple to do so I should be ok with that.
Ford 6.0L Power Stroke Diesel :: 2004 E350 - Bypass Coolant Filter Or IPR Full Flow Coolant Filter
I am going to install a coolant filter on my 2004 6.0 E350 van. I have read threads about bypass filters and full flow filters and I started asking myself "Why use a bypass when I can filter all of the coolant?"
Is there any reason why someone should use a bypass filter? I bought the van used knowing I would eventually have to do most if not all of the 6.0 repairs. IPR sells a complete coolant filter.
I talked with the people at FICM repair and they suggested I do my research but leaned towards the IPR cooler. Ed spent a good 30 minutes on the phone answering all my questions and never asked if I wanted to buy anything. If anything, he was trying to stop me from throwing money at the van until I isolated what needs to be repaired.
I already bought the Sinister Kit and requested a return.
Ford 7.3L Power Stroke (1999-2003) :: Coolant Started Rushing And Boiling Out Of Top Of Reservoir
Today on a little road trip about 250 miles everything was going well then towards the end i was about to arrive when the temp gauge rose about a quarter inch from where it normally runs and i stopped at a gas station and all my coolant started rushing and boiling out of the top of my reservoir, I let the truck cool down and removed the cap and i lost all the coolant in the reservoir i bought two jugs and filled it back up and fired her up and the temp is back to normal and was not leaking from anywhere.
Hit the road again for the rest of the roughly 35 miles of the trip to my camp no smoking or lack of power then through a little sand and mud and she stayed cool. I was towing a small single axle utility trailer with a atv and was going 65-70 whole way. Truck has never had a problem with anything in the year and a half i have had it. Just hit 250k. What could this have been? Its holding all the coolant its been in there for a couple hours now without leaking. Thermostat maybe stuck for a second? Or a air bubble?
Ford 6.0L Power Stroke Diesel :: 2006 - Coolant Leak In Front Of Engine?
I have a 06 f250 that has a coolant leak in the front of the engine. It's was leaking about a month ago replaced the water pump it stopped. Then about 2 weeks later it started back up again. It only happens when the engine is cold. But once it warms up it starts leaking again. I am confused as all get out on this.
View 1 RepliesFord 6.0L Power Stroke Diesel :: 2003 - Engine Heated Up Due To Loss Of Coolant
So I have a 2003 6.0 king ranch w/ 164k on it.. EGR delete, high pressure oil pump, coolant filter and SCT tuning. A couple months back I had a coolant flush done. After about a week the coolant tank was empty.. Engine heated up due to loss of coolant.. I flushed system again and put ford gold coolant back into the tank. (5 gallons). A couple days later and coolant was very low and engine heated up?? There are no signs of leaks anywhere...Added water and it cooled back down. I'm lost. EGR is deleted but no studs done.....
View 14 RepliesFord 6.0L Power Stroke Diesel :: 2004 - Engine Coolant Temp Gauge Does Not Work
Bought this truck, and the engine coolant temp gauge does not work, so I replaced the sender, still don't work.
View 8 RepliesFord 6.0L Power Stroke Diesel :: Engine Working Hard - Head Unseat - Where Does The Coolant Go
When the engine is working hard and the head (s) unseat, where does the coolant go, in the oil, to the atmosphere or both?
There are times when I am pulling heavy ( 18 to 20K+) pulling up a hill from a stop, and I can hear the engine working hard, then I later check the coolant level and it has drop.
Where did it go?
Ford 6.7L Power Stroke Diesel :: Coolant Leak Somewhere On Top Of Engine Running Down To Oil Pan And Bell Housing
I have a coolant leak somewhere on the top of the engine running down to the oil pan and bell housing. I have done some research and discovered it could be the coolant inlet tube to the turbo.
View 14 Replies