Ford 6.0L Power Stroke Diesel :: Metal CAC Tube Part Number?

I found 2 Ford OEM part numbers for what seems to be the same identical metal CAC Tube for the drivers side.

6C3Z-6C640-AA
and
6C3Z-6C646-BA

I wanted to place an order today for my '06 but want to make sure it's the right one. What is going on here? (maybe one is for a '03-04) I Don't know...

View 14 Replies

Ford 6.0L Power Stroke Diesel :: Top Of Engine Fuel Filter Part Number?

With an AD2 and no HFCM, need to have a part number for just the top of engine filter? All I can find (Motorcraft, AMSOIL, Racor) are the dual filter kits.

View 4 Replies

Ford 6.0L Power Stroke Diesel :: ICP Sensor Part Number?

Looking to confirm the part number. My ICP is mounted on the RH valve cover and has a yellowish upper where the three pronged connector inserts.

View 10 Replies

Ford 6.0L Power Stroke Diesel :: Oil Rail Plug Oring Part Number

I'm doing standpipes and dummy plugs. There is a 4mm plug with an oring and mine was trashed. What is the P/N?

View 13 Replies

Ford 7.3L Power Stroke (1999-2003) :: Replacement Water In Fuel Sensor - Part Number?

Looking for the Ford (or even Dorman) part number for the Water-in-Fuel sensor that bolts to the outside of the fuel bowl?

Guzzle has it pictured here:

The water sensor tip on mine is badly corroded and eaten away.

What's a part number and who sells them that I can get it delivered next day?

View 7 Replies

Ford 6.0L Power Stroke Diesel :: Intake Elbow Gasket / O-Ring Part Number

I need to remove my EGR valve to clean the unit of carbon. While there I will be removing the intake elbow to check if I have the throttle plate installed on my engine. What the part number is for the gasket / o-ring that seals the elbow to the intake manifold??

View 7 Replies

Ford 6.0L Power Stroke Diesel :: 2006 F350 4X4 Front Hub Bearing Part Number?

Can't seem to find a number for just the bearing and snap ring. All I can find are the dang assemblies.

View 11 Replies

Ford 6.0L Power Stroke Diesel :: A/C High Pressure Cutoff Switch - Part Number

Probably needs to get, f I had a part number for the A/C high pressure cutoff switch, and the 4 wire connector (2006 MY)? I guess for the 6.0L it is actually called "Dual Function Pressure Switch, DFPS".

Was dealing with some chaffing and wanted to add to my "parts list spreadsheet".

Base numbers:
A/C high pressure cutoff switch: 19D594
A/C cycling switch: 19E561

Found the clutch connector part number: Aftermarket - DD1085

Probably need to call this thread "I hate electrical problems also!"

View 6 Replies

Ford 6.0L Power Stroke Diesel :: Part Number For High Pressure Oil Rail Check Valves

What is the part number for the high pressure oil rail check valves for a 2003 6.0L? I'm referring to the ones that screw into the oil rail. I would like to avoid the local dealer if possible.

View 6 Replies

Ford 6.7L Power Stroke Diesel :: 2015 - Fuel Return Line Clip Keeps Falling Off / Code P0088

Ok. I have a 2015 6.7 power stroke and my fuel return line clip keeps falling off. And goes into limp mode. It has happen twice and in come up with code p0088. And I push it back on start the truck and it is fine. But idk why it is doing it

View 1 Replies

Ford 7.3L Power Stroke (1999-2003) :: PCM Ground Clip Part Number?

Does that little clip that grounds the PCM case have a part number? I've been troubleshooting an "SES - but no codes that would cause it" issue, and noticed tonight that clip is not there. Even a photo would work, as I assume I could make one if I had to. It's just a piece of copper, right?

View 4 Replies

Ford 7.3L Power Stroke (1999-2003) :: Return Line Leaking At Fuel Bowl

New to me early 99 (4/98) f350 7.3 6 speed. Truck started acting up a few days after I bought it. Return line at fuel bowl was leaking, so started there and found a bad seal on the Fpr (unrelated to the fuel leak due to disentegrated compression sleeve). Fast forward through a bunch of parts swapping that still resulted in miserable lift pump pressure readings, I pull the sending unit out of the tank, expecting to find a plugged screen.

Well, there was in fact a plugged screen... Attached to the bottom of an in-tank pump. How did that get there?!? Everything I've read says there should only be a pickup tube??? Should I get a new sending unit from a junkyard and do the hutch mod or???

View 9 Replies

Ford 7.3L Power Stroke (1999-2003) :: Regulated Return Fuel Bowl Delete

I want to build a fuel bowl delete/regulated return fuel system for my 2000 f250 . I would like to make a really neat kit and attach all products used so people that want to build their own would have a useful source. I understand that it will probably cost the same but I want to design my own and route it the way I want . I have 3/8 1/2 5/16 and 1/4 stainless tubing as well as a bunch of unions and 90* 45* fittings and a couple tees. What size is the ports for the fuel lines that go into the four corners of the heads . I am a pipe fitter pipe welder by trade so this is basically a mini version of what I do everyday at work. Looking for some size details of the head port sizes so I can get the correct fittings?

View 3 Replies

Ford 7.3L Power Stroke (1999-2003) :: Fuel Return / Supply Hard Line Connection

I am rebuilding the oil cooler and noticed since its removed I have great access to this fuel line pair from fuel bowl to soft lines below. How these disconnect at the soft lines? I happen to have a new set waiting to be installed. Is there a tool required ?

View 3 Replies

Ford 6.0L Power Stroke Diesel :: How To Get Oil Tube In Turbo

Still working on this E450. Now, I'm trying to get the turbo back on and I don't know how the heck to get the oil tube in.

There's so little room that I can't lift the turbo up. Just getting it in and out is a chore. I was able to pull the oil tube out with some difficulty when I was removing the turbo, but if it put it in first, the turbo won't go over it to get back in. If I leave it disconnected to get the turbo in, I have no way to reach under it to get the oil tube back in.

I only messed with it for a little while - it's physically difficult bending over inside the van to wrestle with it - and will go back at it first thing in the morning. I know there's gotta be a way, I've just never done this before.

Do I stick the tube in the turbo first, in the engine, or neither until I got the turbo in place?

View 3 Replies

Ford 6.0L Power Stroke Diesel :: Oil In Cold Side CAC Tube

What does that mean when there is a little oil in my cold side CAC tube?? It's just a little but it's even found it's way up into the intake elbow. Hopefully nothing too bad.

View 14 Replies

Ford 6.0L Power Stroke Diesel :: CAC / Boost Tube Keeps Coming Off Under Power At Turbo Connection

Having this problem, what to do to correct it? There is no hole in the boot and this just started about a year ago. Does not do it all the time.

View 4 Replies

Ford 6.0L Power Stroke Diesel :: Lost Turbo Again Even After New EBP Tube And Sensor?

Lost my turbo at idle early this week un plugged the ebp sensor which gave me a 10.7 default reading but got the turbo back at idle. Ok easy fix. Ordered a new ebp tube and sensor. Wired up the new pigtail and installed the new sensor and tube. Truck ran great all day. Now I goto leave tonight and I have the same problem.

So I unplug the ebp sensor and I have a default reading of only 6.5 now? I checked all my splice pigtail connections and everything looks fine still. What it could be this time?

View 14 Replies

Ford 6.0L Power Stroke Diesel :: How To Change Boot Or Hose On Egr Delete Tube

How to get the boot or hose off the egr delete tube without having to tear everything apart? mines leaking i have new hose to replace just not sure how to get the old one off...

View 7 Replies