Ford 6.0L Power Stroke Diesel :: ICP Sensor Part Number?
Looking to confirm the part number. My ICP is mounted on the RH valve cover and has a yellowish upper where the three pronged connector inserts.
View 10 RepliesFord 6.0L Power Stroke Diesel :: Metal CAC Tube Part Number?
I found 2 Ford OEM part numbers for what seems to be the same identical metal CAC Tube for the drivers side.
6C3Z-6C640-AA
and
6C3Z-6C646-BA
I wanted to place an order today for my '06 but want to make sure it's the right one. What is going on here? (maybe one is for a '03-04) I Don't know...
Ford 6.0L Power Stroke Diesel :: Top Of Engine Fuel Filter Part Number?
With an AD2 and no HFCM, need to have a part number for just the top of engine filter? All I can find (Motorcraft, AMSOIL, Racor) are the dual filter kits.
View 4 RepliesFord 6.0L Power Stroke Diesel :: Oil Rail Plug Oring Part Number
I'm doing standpipes and dummy plugs. There is a 4mm plug with an oring and mine was trashed. What is the P/N?
View 13 RepliesFord 6.0L Power Stroke Diesel :: IH Part Number For The Fuel Return Tube
When I went to do my fuel filters tonight I found that the Fuel Return Tube had broken. I have the Ford part number 3c3z-9t289-AA and was looking to see what is the IH part number. I think I'll pick up that oil filter assembly too.
View 4 RepliesFord 6.0L Power Stroke Diesel :: Intake Elbow Gasket / O-Ring Part Number
I need to remove my EGR valve to clean the unit of carbon. While there I will be removing the intake elbow to check if I have the throttle plate installed on my engine. What the part number is for the gasket / o-ring that seals the elbow to the intake manifold??
View 7 RepliesFord 6.0L Power Stroke Diesel :: A/C High Pressure Cutoff Switch - Part Number
Probably needs to get, f I had a part number for the A/C high pressure cutoff switch, and the 4 wire connector (2006 MY)? I guess for the 6.0L it is actually called "Dual Function Pressure Switch, DFPS".
Was dealing with some chaffing and wanted to add to my "parts list spreadsheet".
Base numbers:
A/C high pressure cutoff switch: 19D594
A/C cycling switch: 19E561
Found the clutch connector part number: Aftermarket - DD1085
Probably need to call this thread "I hate electrical problems also!"
Ford 6.0L Power Stroke Diesel :: Part Number For High Pressure Oil Rail Check Valves
What is the part number for the high pressure oil rail check valves for a 2003 6.0L? I'm referring to the ones that screw into the oil rail. I would like to avoid the local dealer if possible.
View 6 RepliesFord 6.0L Power Stroke Diesel :: Idler Pulley Bearing Part Numbers
I need to replace the bearing on my Idler pulleys, both smooth and grooved. I also want to replace the bearing on the tensioner pulley. What are the part numbers and the best place to order them from?
View 10 RepliesFord 6.0L Power Stroke Diesel :: 2006 - 4WD Front Hub Bearing Replacement
I am looking for the known good replacements. Almost made the 200,000 mile mark before getting a groul out of the driver side. Ball joints seem good with very little movement.
View 7 RepliesFord 6.0L Power Stroke Diesel :: 2004 - F350 - Door Lock Keypad Number?
04 f350, how do i get the door lock keypad number?
View 9 RepliesFord Super Duty (1999-2016) :: 2007 4x4 Hub / Bearing Assembly Part Number
I am not sure mine are done yet, but I was told by mechanic that they are failing and that the fronts aren't spinning as smooth as they should when up on the jack. They were investigating a sticky caliper at the time and said they believe heat from failing bearing caused that issue. I figured I'd do a little looking for parts pricing just incase. Does come with everything needed to change it? From reading, I found part # 73CZ-1104B is that the one?
View 6 RepliesFord 6.0L Power Stroke Diesel :: 2006 F350 2WD - Creaking Sound In The Front End
I am trying to track down a creaking sound in the front end. Happens when turning mainly left but occasionally right or slow speed turning the steering wheel. I've rebuilt the front end (not because of the creak) ball joints, tie rod ends both inner and outer, sway bar bushings, power steering pump, shocks, steering shock etc. what's left? All parts have been greased good but still can't find it.
View 2 RepliesFord 6.0L Power Stroke Diesel :: 2005 F350 - Bearing Get Loose In Turbo?
2005 f350 188000 on the clock had a bearing get loose in the turbo . Installed a new power-max but if the bearings are oil fed should i also change it? There are no signs of metal in the oil or the old turbo . The oil has 600 miles on it with archoil.
View 1 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Noisy Alternator - Bearing Part Number?
I have an 2003 F250 with a nosiy alternator and need to change the bearings. I would like to have the bearings on hand before i take it apart. What is the part numbers for the bearings I need?
View 3 RepliesFord Super Duty (1999-2016) :: Rear Wheel Seal And Bearing Part Number Check
Replacing the backing plates on my rear end, figure get new inner bearings and seals in there. Bearings seem fine but cheap insurance, dont wanna pull it all off again.
When i pulled my hub off, the hub seal stayed on the housing shaft, this is normal? Just gotta pry it off there somehow?
Then new seal-TIMKEN 370247A just tap it into the back of the hub? Also is this the right inner bearings? TIMKEN NP114036
Ford 6.0L Power Stroke Diesel :: 2006 F350 - Front Right Caliper Won't Slide Off Pads / Stuck
Replacing remaining three calipers on my 2006 F-350 2wd as a preventative measure after I had a drag on the left front. Passenger side front being difficult. Caliper won't slide off pads. I believe pins are stuck but it doesn't seem they've got the caliper stuck - appears that I can't get pistons to stay compressed enough to clear pads. Caliper has some wiggle on pads - just not enough.
I tried multiple C-clamp iterations but can't get there just yet. I'd rather not fool with the bracket and removal won't fix my problem, just allow me to work it on the bench. I do have a replacement caliper, so damaging it to get it off is an option. I have sprayed Kroil into the piston seals in a Hail Mary when I pick this up tomorrow.
Ford 6.0L Power Stroke Diesel :: 2006 F350 - Front Brake Caliper Bracket Bolts
I read a reference to the front brake caliper bracket bolts being one time use torque to yield and must be replaced every time they are loosened. Is this true?
This is on my 06 F-350 in my Sig.
Ford 7.3L Power Stroke (1999-2003) :: PCM Ground Clip Part Number?
Does that little clip that grounds the PCM case have a part number? I've been troubleshooting an "SES - but no codes that would cause it" issue, and noticed tonight that clip is not there. Even a photo would work, as I assume I could make one if I had to. It's just a piece of copper, right?
View 4 Replies