Golf IV R32 :: Rear Sway Bar Bushings Squeak?
I'm pretty certain that my 22mm neuspeed sway bar bushings are shot. they squeak like crazy and when I looked at them to grease them up it looked like they had space, oh and they knock like crazy. Any better source or place to check locally? Would Napa carry something like this? and is Poly my only option? would a rubber bushing wear quicker?
View 3 RepliesTiguan :: Front End Clunk - Sway Bar Bushings?
My Tig has been doing a sharp clunk (single) for awhile when going a bit too fast over speed bumps. I just ignored it, as I'm not flying over bumps regularly and I had just replaced the OEM struts all around. Now when accelerating over 60 kph the car has a side to side shimmy. Also when compressing or unloading the front end suddenly, like with dips on the road, makes it clunk. Checking the various suspension components?
View 6 RepliesGolf V R32 :: Clicking Noise While Turning Steering Wheel - Sway Bar Bushings?
Front sway bar bushings causing "clicking" noise while turning the steering wheel? Usually happens when I'm moving into or out of a parking spot and while I'm turning my steering wheel. I got the driver side, I believe, lower control arm replaced and after that i started getting a faint clicking noise when I'm turning the steering wheel.
The dealer, after multiple visits, discovered it's the front sway bar bushing causing the noise. They said it's really not worth the cost, since it's isn't a safety issue and the whole sway bar needs to be replace since you can't buy bushings alone. I want to get rid of the noise regardless of safety or not.
Corolla / Matrix 2009-13 :: Crunching Sound From Wheels - Suspension Or Sway Bar Bushings?
I have a 2009 Corolla S. When I drive on the highway and the road dips and then comes back up, I hear a crunching sound as the wheels come back up. It almost sounds like springs. I thought maybe it was the cold weather but it isn't. The sound is in the front end.
At 53,000 miles, it seems early for this kind of problem and I never have had this so early in the life of a car. I do have the Toyota Extended Warranty of 125000 miles and 8 years. Would this be covered under that?
It doesn't really happen over bumps, it's when the car dips down and comes back up on the highway...50 mph or more.
Ford Super Duty (1999-2016) :: Greaseable Sway Bar Bushings And End Links
I have a 2002 F350 4x4 CC 7.3 i am wanting to change the sway bar bushings front and rear to poly and I want greasable bushings to avoid the squeaking that you get with these bushings alot of the time. I would like to change the end links to poly too i realize these wont be greaseable. What was the outcome and where did you buy the bushings. What is the size of the front and rear sway bars and the length of the end links??
View 14 RepliesFord Super Duty (1999-2016) :: 2003 - Sway Bar Bushings Specs?
What are the specs for the sway bar bushings that go in the retaining bracket for a 2003 ford f250? went to advanced auto last night to get some got mine off my truck and the one they gave me was a little too small for my sway bar and the retaining bracket.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Thumping Noise That Generally Accompanies Worn Out Sway Bar Bushings
I have been having that nice thumping noise that generally accompanies worn out sway bar bushings. I did bushings last spring but a noise came back shortly thereafter. Finally got bothered enough/ found enough time to take a look at it and tracked it down to the sway bar again. My right front axle mount has taken damage before and is now all bent up, not allowing the bushing clamp to hold tight to the bushing. Pictures of the issue are below.
Front view of the entire mount.
Rear view showing the sway bar mount plate.
I am unsure what to do about this mount. As you can see it has been pretty messed up by the PO. What could be done to fix the issue?
Camry :: 2004 SE - Rear End Sway When Hit A Bump
I have an 04 SE with 3.3. It hit a curb hard last year. With all new parts on the front right corner, including a strut. The car would sway in all directions after the repair. I got it aligned and all was in spec except the rear strut was bent causing a 3 degree camber difference. I put new struts on all the way around.
I didn' change the front sway bar. Now the rear of car is swaying to the side when I hit a bump. Is that an alignment issue?
Seems like it bangs and bottoms out more so than it should with new struts. Used old springs, but all else on struts is new, insulators, mounts, strut. Used old boots.
Camry :: 2010 LE - Ultra Racing Rear Sway Bar Doesn't Include Bracket?
I got the UR rear sway bar for my 2010 camry LE today, but it only has the bushing but doesn't include the bracket that secures the bushing? Is that OK can I reuse the OEM bracket? or did they not send me everything?
View 3 RepliesFord Excursion :: Radius Arm Bushings Replacement
I am in need of new radius arm bushings (both sides). How to be able to just unbolt the sway bar, unbolt the shocks, dismount the coil springs so they fall out to the sides and then drop the rear of the radius arms so they could press out the old bushings and insert the new? This is a 2WD and I think the process would be same for an F250 of the same year (2000 - 2004). The reason I ask is because I really, really don't want to have to get down to the king pin level and completely remove the radius arms if I don't have to.
View 2 RepliesFord Aerostar :: Bushings And Upper Control Arm Replacement
We've got a '96 aerostar (4x4). The bushing and upper control arm seem to need replacement but the parts seem to be obsolete. Any source for these (other than salvage yards)?
View 14 RepliesLexus RX 2004-09 :: Lower Control Arm Suspension Bushings Replacement?
Car has a little over 100K. How to replace the bushings on the suspension arms. Took my car in for the brake switch recall and was told my bushings were cracked. Not sure which ones, but I assume all of them. Looked online for a DIY, but not for the RX330. From some of the DIY's I've seen so far, it looks like a bit$! to replace those rubber bushings.
View 14 RepliesAvalon 2005-12 :: Changing Rear Strut Rod Bushings?
Bushings on the rear strut rod and rear carrier assembly where the rod attaches are gone - any source? From what I can tell these are not sourced individually?
View 4 RepliesGTI 337/20th Anniversary :: Rear Control Arm Bushings Are Cracking
My rear control arm bushings are cracking. I was wondering if this is a serious problem and what negative effects it will have if I leave them alone.
View 10 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Sway Bar Bushing Replacement?
I have a friend with an 01 f250 super duty who needs to replace sway bar bushings.
View 6 RepliesCamry :: 2003 - Rear Brake Replacement
2003 LE Camry i want to replace Rear brakes. Is there a DIY for it. I know it is challenging...
View 10 RepliesLexus RX 2010-15 :: Blown Rear Shocks And Trailing Arm Bushings?
Have to replace those on 3rd gen vehicle?
View 14 RepliesFord Aerostar :: 1992 - Rear Control Arm / Bushings Have Worn Out
I have a '92 Aerostar XLT with a rear control arm problem. The bushings have worn out and the rear end floats side to side as much as 1 1/2 inches. Ford says one bushing comes in the arm ( no longer avail ), one is a press in (no longer available), and the other is like a strut bushing and is available but without the other 2 there is no point in replacing the one. How to fix this enormous problem???
View 10 RepliesLexus RX 2004-09 :: 2007 - Control Arm Bushings Worn?
I bought a used 2007 Lexus RX350, FWD, in December 2012 and had it looked over before I signed the papers by a non-biased mechanic. He said the control arm bushings would need to be replaced in the future.
When I took the car in last month to my mechanic (a private mechanic, not a Lexus dealership), he said the control arm bushings on the right side are worn a lot more than the left side. He said on this Lexus, it would require removing the engine to replace the parts (?) and that because it was such a labor intensive job, and the left will eventually wear, that he advises I get both the left and right replaced at the same time.