Camry :: 2010 - Steering Wheel Makes Clunking / Clicking Noise When Turning Car
I've recently replaced the power steering pulleys and belts. Now when i turn car, it makes a clunking /clicking noise and sometimes the power steering tugs back a bit. 2010 camry.
View 3 RepliesCamry 2012+ :: 2016 - Clicking Noise While Turning Steering Wheel Left Or Right
I have 2016 camry 4 cyl have roughly 2300 miles and I'm noticing a click click while turning the steering wheel left or right while stationary and vehicle running sounds like it's coming from under the dash.
I've seen there is a tsb for other year camry intermediate shaft issue, my vehicle is lowered on eibach Springs and would hate to take back to dealer and have them blame it on the springs in a vehicle that has only 2,500 miles.
Accent MC (2006-11) :: Clicking Noise When Turning Steering Wheel At Dead Standstill
When I am sitting at a dead standstill and I turn the wheel lock to lock, left or right, I hear a clicking sound. The clicking is louder inside the car, but I can't tell if it's coming from the steering column or the various linkages in the suspension or drive systems.
If I drive in circles, with the wheel at a constant (or changing) angle, there are no clicks, so I don't think this is a CV joint issue.
What could be causing this noise? I really don't want to take off my lowering springs and restore this thing to the original configuration for a warranty repair visit to the dealership.
If I do, you may see a fire sale of H&R 20mm wheel adapters and B&G lowering springs in the near future.
Golf IV R32 :: Rear Sway Bar Bushings Squeak?
I'm pretty certain that my 22mm neuspeed sway bar bushings are shot. they squeak like crazy and when I looked at them to grease them up it looked like they had space, oh and they knock like crazy. Any better source or place to check locally? Would Napa carry something like this? and is Poly my only option? would a rubber bushing wear quicker?
View 3 RepliesGolf IV R32 :: Steering Wheel Making Cranking Noise When Turning
So when turning my steering wheel i get this croaking noise. At stand still and while driving. Its annoying the heck out of me. You can hear it in the car and outside. What it could be? Power steering fluid level is normal.
View 11 RepliesFord 7.3L Power Stroke (1999-2003) :: Thumping Noise That Generally Accompanies Worn Out Sway Bar Bushings
I have been having that nice thumping noise that generally accompanies worn out sway bar bushings. I did bushings last spring but a noise came back shortly thereafter. Finally got bothered enough/ found enough time to take a look at it and tracked it down to the sway bar again. My right front axle mount has taken damage before and is now all bent up, not allowing the bushing clamp to hold tight to the bushing. Pictures of the issue are below.
Front view of the entire mount.
Rear view showing the sway bar mount plate.
I am unsure what to do about this mount. As you can see it has been pretty messed up by the PO. What could be done to fix the issue?
Passat (B6) :: Clicking Sound When Turning The Steering Wheel
Getting a slight clicking sound/feel when turning the steering wheel when either stopped or moving very slowly. It's most noticeable when turning in and out of a parking space. Don't think it's subframe but may the strut bearing caps.
View 16 RepliesSonata I45 (YF - 2011+) :: Clicking When Turning Steering Wheel
I am getting a click from the steering when rocking the wheel left or right. It is coming from the assembly the intermediate shaft is connected to. I see there is a large bearing on the end where the shaft comes out. I am not sure what this assembly is called. I have had it at the dealer and they said they re-torqued everything but they could not duplicate it.
I do not fall in the range for the recall and I have no problem with the car pulling left so I do not think it has anything to do with the intermediate shaft. It is clearly from the assembly the intermediate shaft is connected to on the steering wheel end of the intermediate shaft. 2011 limited
Golf V R32 :: Loud Clicking Noise When Turn Steering Wheel / Neuspeed Springs Installed
I had the neuspeed springs installed last weekend and now the Front right side make a loud clicking noise every one turn on the steering wheel. it sounds like the springs it self. What could it be?
View 9 RepliesFord Excursion :: Steering Wheel Clicking While Turning With Turn Signal On
My wife asked me yesterday what was that "clicking" sound when I turned. I never noticed it before, now I notice it constantly.
With the wheels straight - activate either side turn signal. Now turn the whee IN the direction your signal is activated, notice a clic-clic-clic??
Then when you turn back towards straight the signal will de-activate and the clicking is gone. This an indication the multi-function switch is going?
Tiguan :: Front End Clunk - Sway Bar Bushings?
My Tig has been doing a sharp clunk (single) for awhile when going a bit too fast over speed bumps. I just ignored it, as I'm not flying over bumps regularly and I had just replaced the OEM struts all around. Now when accelerating over 60 kph the car has a side to side shimmy. Also when compressing or unloading the front end suddenly, like with dips on the road, makes it clunk. Checking the various suspension components?
View 6 RepliesCamry :: 2007 - Rear Sway Bar Bushings Replacement?
As a lot of Camry in this world, my rear sway bar bushings went bad. Tried to replace them, I went slowly with the ratchet on the first bolt as I don't want to go with the impact tool, but that damn bolt decided to break anyway...
I called my local dealer and he said he don't have the replacement in stock and he cannot tell me the size of this bolt.
What is the size? My 07 SE have the bracket with only two bolts.
Elantra XD (2001-06) :: Clicking / Popping Noise When Reversing, Turning The Wheel And Braking
Okay I have a 2006 Hyundai Elantra with 56,000 miles. Whenever I have been driving for a while in town and and the car is heated up, I get a clicking/popping noise coming from the front end whenever I reverse, turn the wheel, and then brake.
I've been testing it more but it won't always click or pop when i turn the wheel, but when I push the pedal down to stop it clicks and pops a lot. And then as I turn the wheel back without being on the brake pedal it'll click a little bit more.
Normally this would sound like a suspension problem but the fact that I have to push the pedal down to "activate" the sound has me baffled. And the weird thing is, is sometimes when I'm turning into a parking spot at low speeds it will click just a little bit..
It almost feels like the brake lines are getting tangled up and making sounds. I know that's not the case but I'm trying to describe the sound. It's not the normal pop you would get when a tie rod is going out. It doesn't really sound like its metal on metal. And it doesn't constantly click while reversing or turning like it would if it were the CV axle.
The car stops just fine though.. I'd even say the brakes are pretty touchy. The other issue I have with brake sounds is coming from the back. When I'm slowing down ... at around 15 mph it will click in the back every rotation. It has to be coming from the drum brakes. That doesn't concern me so much as it probably is time for new pads or something in the hardware needs tweaking.
Corolla / Matrix 2009-13 :: Crunching Sound From Wheels - Suspension Or Sway Bar Bushings?
I have a 2009 Corolla S. When I drive on the highway and the road dips and then comes back up, I hear a crunching sound as the wheels come back up. It almost sounds like springs. I thought maybe it was the cold weather but it isn't. The sound is in the front end.
At 53,000 miles, it seems early for this kind of problem and I never have had this so early in the life of a car. I do have the Toyota Extended Warranty of 125000 miles and 8 years. Would this be covered under that?
It doesn't really happen over bumps, it's when the car dips down and comes back up on the highway...50 mph or more.
Ford Super Duty (1999-2016) :: Greaseable Sway Bar Bushings And End Links
I have a 2002 F350 4x4 CC 7.3 i am wanting to change the sway bar bushings front and rear to poly and I want greasable bushings to avoid the squeaking that you get with these bushings alot of the time. I would like to change the end links to poly too i realize these wont be greaseable. What was the outcome and where did you buy the bushings. What is the size of the front and rear sway bars and the length of the end links??
View 14 RepliesFord Super Duty (1999-2016) :: 2003 - Sway Bar Bushings Specs?
What are the specs for the sway bar bushings that go in the retaining bracket for a 2003 ford f250? went to advanced auto last night to get some got mine off my truck and the one they gave me was a little too small for my sway bar and the retaining bracket.
View 2 RepliesSubaru - Legacy :: 2011 Outback Clicking Noise Fro Right Front Wheel Area When Turning
I bought a new 2011 Outback about 3 weeks ago, and I have around 1500 miles on it.
A couple days ago I started noticing a clicking noise near the right-front wheel area whenever I turn for the first time after I start the engine (releasing handbrake, shift to Drive, etc). This happens only one time per drive, and mostly after I turn to the right for the first time. After hearing that sound, the next time I will hear it is only after I park and shutdown the engine and restart.
Lexus GS 2006-11 :: Ticking / Clicking Noise From Front Passenger Wheel When Turning Left?
I posted in this thread originally: [URL] .....
But today I had my wife drive the car and take some slow left turns while I listened so I could get a better idea about what the sound was and where it was coming from. From inside the garage and in the car, it sounded like it was coming from the rear but I now know it's coming from the front passenger wheel and it is not a "grinding" sound at all, it's more of a tick-tick-tick/click-click-click sound.
Applying brakes doesn't change the frequency or quality of the sound, but speed does. The faster the wheel turns, the frequencly of the ticking increases. It doesn't appear to tick/click only once per revolution, it clicks a number of times throughout the rotation and at some points during the rotation it clicks more often than others. Like, tick.... tick... tickticktick...tick...
When going straight there is no noise, turning right, it sometimes might click once or something but it doesn't really happen turning the other way. I've looked at the dust shield around and even tried bending it back a little bit in case it was making contact when I thought it was more of a grind but nothing looks out of place and nothing has been done to the wheel recently other than putting new rims on a couple of months ago.
Wheel bearing? I thought a bad wheel bearing would make noise no matter what direction you're going and pretty much constantly. CV? I thought CV ticking usually only happens at full lock but it ticks even on not so severe turning. Fender liner doesn't appear to be touching the tire, and the car isn't dropped and is AWD so there's plenty of clearance.
So, is this a trip to the dealer? I'm only under powertrain... not sure if something is up if it would be covered. I think wheel bearings are, but not sure about other suspension parts that might cause this.
Passat (B5) :: Clicking Noise Coming From The Driver Side Front Wheel When Turning Left
Noticed a clicking noise when only turning left out of a parking lot today? What this could be? Sounds like it was coming from the driver side front wheel?
View 2 Replies