Camry :: 2007 - Rear Sway Bar Bushings Replacement?
As a lot of Camry in this world, my rear sway bar bushings went bad. Tried to replace them, I went slowly with the ratchet on the first bolt as I don't want to go with the impact tool, but that damn bolt decided to break anyway...
I called my local dealer and he said he don't have the replacement in stock and he cannot tell me the size of this bolt.
What is the size? My 07 SE have the bracket with only two bolts.
Camry :: 2010 LE - Ultra Racing Rear Sway Bar Doesn't Include Bracket?
I got the UR rear sway bar for my 2010 camry LE today, but it only has the bushing but doesn't include the bracket that secures the bushing? Is that OK can I reuse the OEM bracket? or did they not send me everything?
View 3 RepliesCamry :: Thud Sound When Rear Tires Run Over A Bump
I am getting a thud sound when the rear tires run over a bump no matter big or small. I removed the tire jack and it is still there. Could the sound be coming the rear struts or maybe the sway bar bushings? It seems to have gotten worse the last several months.
2003 Camry with 110,000 miles.
Camry 2012+ :: Clunk Noise In Rear Roof Area When Going Over Bump
I have an intermittent "clunk" noise that appears to be coming from up in the rear roof area when I go a gentle bump (like going over uneven pavement pulling into driveway). It's almost as if there is a large ball bearing up there that rolls around and clunks every once in a while. I've tried opening/closing the sun roof and have bounced up and down on the rear of the vehicle to try to replicate... but no luck.. It's almost as if something hits the roof when going over a bump... but there's nothing there that hit the roof...
View 14 RepliesCamry :: 2010 SE Rear Deck Rattling When Back Wheels Hit Any Road Bump
I have an issue with what sounds like the rear deck rattling in my 2010 SE Camry. I can hear it almost every time my back wheels hit any small bump in the road.
I also have subwoofers installed along with dynamat in most of the trunk (just not on the rear deck). This is my main reason for wanting this solved. The rattle is very noticeable when the bass hits in almost every song. Is that where the rattle is coming from?
Ford Super Duty (1999-2016) :: 2004 F250 - Driver Side Rear Sway Bar Link Upper Bolt Removal
I have a 2004 F250 Lariat Crew Cab FX4 6-3/4' bed.
What is the procedure to remove the Driver's side Rear Sway Bar Link upper bolt? - the link attaches to the frame. The nut is on the inside of the frame with about 1/3" to 2/3" clearance between the frame and the fuel tank. Of course, the frame's "C" shape faces towards the inside.
Lexus GX 2004-09 :: 2005 GX470 - Rear Air Suspension Dropping Down To Bump Stops
How to fix rear air suspension from dropping down to bump stops ...if I reset it every night it is fine but if not it will be down on bump stops by morning.
View 3 RepliesLexus GX 2004-09 :: 2005 GX470 - Left Rear Suspension Leak Down To Bump Stops
My left rear suspension will leak down to bump stops unless I turn off auto suspension leveler. I can set suspension at high level turn off and it will stay that way i had set that way for 2 weeks and no leak but if I turn on leveler it may stay or it may leak down usually just left side somebody had said that my air bags were leaking so I tested it out all last month and find it hard to believe the bags are leaking if it will stay inflated a week or 2.
View 1 RepliesFord Excursion :: Hellwig Sway Bar Links Work With Oem Sway Bar?
Can the hellwig sway bar links will work with an oem sway bar? I need new ones and figured why replace with something I know will fail early...
View 3 RepliesGolf V R32 :: Installing H&R Rear Sway?
So tonight I got the chance to install my H&R Rear sway bar on my car...let me start off by saying I was lucky enough to have a lift, air tools, all the correct tools, etc...now the frustrating part...i opened the box saw the bar and new bushings, figured this should be 100% straight forward 10 min job... the old bar came out in about 3 minutes...then I got the new bushings on the H&R Bar and went to put the factory brackets on...they wouldn't fit even close. Luckily I had a press so I pressed them on. Once I got the bar in the car I got the two top bolts started and could not for the life of me get the bottom two...its like they were 1/4in to low... Was I missing parts from H&R? also the factory caps/brackets seemed to sit off to the side of the new H&R bushings and there was no way to line them up straight, but I finally got everything on there..
View 18 RepliesPrius (Gen 3) :: Installing Rear Anti-Sway Bar?
I installed the 2008 Scion xB rear anti-sway bar (part number PTR11-52091) on my Prius Saturday morning. For those interested in this mod, here are install instructions with photos of the process.
The 2008 Scion xB TRD rear anti-sway bar will fit a Gen III Prius.
Golf IV R32 :: Rear Sway Bar Bushings Squeak?
I'm pretty certain that my 22mm neuspeed sway bar bushings are shot. they squeak like crazy and when I looked at them to grease them up it looked like they had space, oh and they knock like crazy. Any better source or place to check locally? Would Napa carry something like this? and is Poly my only option? would a rubber bushing wear quicker?
View 3 RepliesAlignment :: 2000 - Changing Rear Sway Bar End Links?
My car is a 2000 Corolla CE.
If I replace the rear sway bar end links, do I need to get an alignment? (I just got an alignment 2 days ago). Here is a DIY on replacing the rear sway bar end links: [URL]
The top attaches to the strut.....what is the bar the other end attaches to?
Sonata I45 (YF - 2011+) :: Rear Sway Bar And Links Installation
I just installed rear sway bar & links, this made a world of difference in the way the car handles as soon as I made the first turn I could feel the difference in the car it definitely corners flatter, the install only took about an hour did it in the driveway on ramps, I installed the kia sway bar 555102T000 the bar is 18.3 mm while the stock one is only 15mm I included some pics...
View 8 RepliesGolf IV R32 :: Rear Sway Make Noise When Go Over Road Bumps
Rear sway bar make noise when you go over bumps in the road?
View 24 RepliesGolf VI R :: After Installation Of Rear Sway AFS Stuck / Lights Pointing Down
So as the title states, rear sway install, no issues (so I thought ) go to test drive the car afterward, and the headlights go through the normal sweep, but, they don't come up and level out, instead, they are pointing 10ft in front of the car.
The test drive was otherwise flawless, the R responds well to swaybars, my Mk6 TDi did as well, I just have the rear H&R bar on the softer/street setting for now, but it makes a notable difference just on its own in the soft setting, I'm pleased.
Back to the issue now at hand, I researched and so far came up with there is a sensor on the drivers side LCA on the rear of the arm, and one on the rear subframe that has a push rod type arm (looks like a servo) attached to it and a bracket on the subframe, Is this correct? The sensor in the rear is intact, plugged in, and I traced the wire back to the wheel well and there is no evidence of a ground, pulled or severed wire. I have no scanning equipment and am leery of going to the dealer and letting them plug into the ECM for anything now that I am tuned, not really for warranty, more for I don't want to risk anything being corrupted or altered.
Golf IV R32 :: Rear Sway Bar Installed Correctly But Makes Noise
So after about 3k on my rear sway I checked everything to make sure its tight. All is tight, but i notice it moves very little but its enough to make noise and drive me nuts. hard to explain but if you see the h&r bar it has very small allen head screws inside a ring that keep the bar in place where it bolts to the frame there is only a 1/16 of an inch or so of play and its driving me nuts.
View 14 RepliesFord 6.7L Power Stroke Diesel :: Won't Getting Rear Sway At All - Normal?
I wasn't sure if I should be having any sway at all while pulling our new 30' TT. Dry wieght is 7200lbs, GVW is right at 9500lbs, tongue weight is around 800lbs, and I'm running a Fastway E2 WDH with sway control built in. While towing this weekend, I was experiencing a very slight amount of sway. It wasn't what I considered to be much of an issue but my wife and daughter both asked why the truck felt as if it was moving side to side slightly. When I say slightly, imagine a small glass of water filled about 1/4" from the top. The sway wouldn't have been enough to spill the water, but enough to sway it slightly back and forth. Winds were about 3-8mph hitting me from the north west (in relations to my trucks heading).
I do have some suspension enhancements that might have contributed to the sway. I have roughly increased the rear end by 4" by adding add-a-leafs and F350 blocks. I have Fox 2.0 shocks and a Helwig Bigwig sway bar. Plus I'm running 295 Nitto Trail grapplers , all 4 at 80psi. I've read that the more aggressive tires could also be a contributor.
My question ultimately is: should I be feeling any sway at all? Is a very slight amount of sway normal when pulling a 30' 9500lb rear hitch pull?
Ford Excursion :: Addition Of Rear Sway Bar With 8" Lift?
I'm going to be installing an 8" lift on my excursion and I would like to add a rear sway bar.
I cannot find any info on the hellwig if it works with lifted excursions or if I need extended links, which I also cannot find for an 8" lift
I found front sway bar end links for 8" lift but the rear is really frustrating me