Golf IV / Jetta IV :: 2004 Won't Start After Clearing DTC Codes?
Yesterday I purchased an 04 Jetta 2.0 with 179k. It was super cheap and pretty clean. Needs work but I bought it to fix it and daily it. Anyway. When I initially went to look at the car, It started right up. after test driving it, I turned it off to make a deal with the guy. Then started it back up to pull on the trailer. Towed it home, Started right up again to get off the trailer. All was good.
This morning I go out, scan the codes (with an obdII scanner, not vag-com), get the codes, then erase them. Just to get a fresh start at the issues. I go to start the car, and it wont start. Turns over but doesn't fire. Could erasing the codes have done something?
Here's the codes that popped up in case they're important to this situation. P0043, P0102, P3081, P0113. I did scan the codes again after I erased them and it wouldn't start. P0043 is still there.
Subaru - Impreza :: 2005 Stalls After Clearing Codes P2096 And P0506
The check Engine light on my 2005 Subaru Impreza is on and the codes that I have seen are P2096 and P0506. After my mechanic clears the code, I drive off, unknowingly that soon after my car would stall due to (which I later found out from Subaru) the computer having to re-learn to idle after clearing the code. My local Subaru dealer said I need to let the car idle in neutral for about 20 minutes, which I thought was an absurd answer, especially coming from Subaru who knew about the issue. My mechanic said they have seen it with other car makes (Honda or Toyota). I consider this to be a huge safety concern and the "idling" solution is unacceptable.
View 9 RepliesFord 6.7L Power Stroke Diesel :: Clearing Codes After Installation Of Fresh Sensor?
Anyways, so if replace an egt sensor how soon do I have to clear the code after install of a fresh sensor? Could I replace it in my garage and then head to autozone and borrow their scanner or do I need to do the replacement in their parking lot and do it right after the installation? It's my old mans truck and he doesn't have a scanner for his rig.
View 9 RepliesSaturn - Sl :: 1996 - Check Engine Light In Stop And Go Traffic
My daughter has a 1996 Saturn SL with something over 100K miles on it. It runs generally well, although using a quart of oil every thousand miles or so. It passes the smog check required for her registration. It's had new spark plugs within the recommended period.
Recently she went on a road trip, and hit stop-and-go traffic for a couple of hours in one large city; it being January in a warm climate, the weather that day was presumably neither very hot nor cold. The Check Engine light came on. Fortunately she had the time to take it to a mechanic recommended by a friend local to the area, who pronounced the engine OK. She proceeded without incident for the rest of her thousand mile trip.
Sounds to me like the emissions crossed some threshold beyond "marginal" during the lengthy idling and running at low speed. Question: if we wanted to avoid such a condition, what kind of repair would be recommended.
Saturn - SL1 :: 1996 - Coolant Leaking - Fluid Sprayed On Engine Parts
Basically it's a coolant leak problem for my 1996 Saturn SL1 Sedan. Here are the details of the problem....
About 6 months ago my Saturn started leaking coolant. It was very minor, I'd have to add a pint or so every 1 hour worth of driving or 40 miles (I experienced these early stages of a coolant leak before with a 1997 Buick Century). The problem very slowly increased 4 months ago and at about this time I noticed coolant residue on some of the engine parts. Using logic I determined the coolant must be leaking onto the belt which was spraying the fluid around, including the underside of the hood in a very fine line.
By 1 month ago I was adding about a quart of coolant every 15 miles. Still, very manageable with no other problems. Then 2 weeks ago it happened.... For the first time when I'd start my car it would issue that high-pitch squealing sound I'm sure we've all heard on older cars and thought, "man, that driver needs to get their car checked out." The noise would last for a few seconds, then stop. Rarely the sound would kick in also when coming out of a full stop.
Then 1 week ago, it all got worse. Now the car squeaks for around 2-5 seconds 50% of the time after a cold start. 80% of the time from a full or partial stop. About 90% of the time if my speed drops around 15mph. And now it even makes the noise for a few seconds (10% of the time) while driving +30mph. And the coolant leak is really bad. I have to fill the reservoir (add about 90%) anytime I drive more than a few blocks or +5 minutes. Also, for the first time, anytime I stop the car the coolant just drips onto the ground at a significant rate.
What sort of a problem I might be looking at based on my description?
Subaru - Intermittent - Misfire :: 1996 - Check Engine Light With Codes 0301 And 0303?
This is my friend's car and I have never looked under a Subaru hood before. She is getting an intermittent check engine light with codes for cylinder misfires on one and three. Today, I inspected the plugs and all four looked identical, a nice uniform tan color and good condition. No sign of deposits or oil. Did a compression test and found the driver's side bank at 155/150 and the passenger side bank at 185/190. My question at this point is which side is cylinders 1 and 3? The front-most cylinder is on the passenger side. Is this the number 1 and 3? If so, then the low compression on the other bank cannot account for the misfire.
View 5 RepliesSC/SL/SW :: 1996 Saturn Just Stopped At Red Light And Won't Start Back Up
My sis was driving her 96 saturn SL and she was at a red light, then the car just stopped on her and it wouldn't start back up. I had came to push the car to the side of the road to see what the problem was. When I tried to start it, I could hear 1 click. All the lights came on, on the dash but it wouldn't start. I tried to give it a jump but that didnt work. I checked the oil and the oil was really low. There was no oil showing up on the dipstick. So I put in about 4 quarts of oil.
The car still wouldn't start. So I had it towed. The mechanic said that my sis would need another engine for her car. Would really low oil cause someone to need another engine for a car. My sis had just got a oil change about 2 weeks before this happened. I use to drive her car about 5 years ago and it use to burn a quart between oil changes but what would cause the engine to loose so much oil in about 2 weeks. I don't know if there was a oil leak and the oil light did come on the night before her car broke down. I had a starter put in about 4 years ago.
Saturn :: 1996 SC2 Occasionally Won't Start If Weather Is Chilly
My car stopped starting reliably last winter. Since my driveway is on a hill and I have a clutch, I'd roll back and pop the clutch to start it (or just make the kids push - it builds character, right?). I finally broke down and put a new battery in it about a month ago. It still occasionally won't start. It seems worse if the weather is chilly. When it fails to start, the engine will turn over a few times, slower and slower each time, and then die. If I turn the key again right away, nothing - just the "click." If I wait about 2 minutes, it roars to life like nothing ever happened. Doesn't seem like an alternator problem. It's green.
View 1 RepliesSaturn - Clutches - Sc :: 1996 - Grinding Sound When Shifting From 2nd To 3rd
We got the clutch replaced on our 1996 Saturn several weeks ago and ever since we get grinding when shifting from 2nd to 3rd. The mechanic said the synch ring was shot and it wasn't their fault...this problem did not exist before the replacement. Whether this sounds plausible and what we can do to rectify i
View 18 RepliesSaturn - SL2 :: 1996 - Idles Rough And It Revs Up When Change Gears
I have a 96 saturn sl2. It was running ok, but recently it started to idle rough and it revs up when i change gears and then when i release the clutch it drops down and remains about 1200 rpm. Pretty much while I press on the brakes to stop, and press the clutch to get on neutral,the rpm shoots up and slowly goes back down.
Also when I start the car it feels like its revving, but my foot is on the brake and the car is on neutral.Also no matter how much I've driven it, I can go into first and 2nd gear w/out having to press the accelerator and it will start to move. the rpm will remain @ about 1000 to 1200. The check engine light is not on and the car seems to be using up more gas.
I'm considering changing the plugs and wires, gas filter to see if it s. I noticed oil leaking a little around the valve cover, so I may change that too.
Saturn - SW2 :: 1996 - Left Read End Of Car Makes Bong Sound
I have a 1996 Saturn SW2. When I turn hard left at a bit of speed (like about 20 mph), the left read end of my car makes a BOING sound... what could be causing this??
View 2 RepliesSaturn - Sl :: 2002 - SES Light Has Been On Constantly - Codes P0172 / P0300 And P0507
Saturn 2002 SL1 5-speed. My SES light has been on constantly for about a year (was intermittent before that) with the codes P0172, P0300 and P0507. The car also idle high (2500+) occasionally at stops. My mechanic said it is likely an intake gasket but would need a full diagnostic to determine and that is not a safety hazard to drive but that I am getting less mph. I can't afford to fix it now but I have an emission test due. Is there a way to turn to light in the mean time?
View 1 RepliesGolf V R32 :: Airbag Fault Comes Right Back After Clearing?
Every thing works fine, Horn, steering wheel controls and the paddle shifter's. I have cleared the code but it comes right back Clock spring?
[IMG][/IMG]......
Suburban :: 1996 K2500 Running Rough / Getting No Codes
My '96 K2500 w/7.4 is running rough.
I've replaced: cap, rotor, fuel pressure reg, injectors (Bosch Design 2's), plugs, wires.
Had it timed today and it still runs rough. Really rough sometimes. I'm getting no codes.
In the morning when the engine is cool, I'm going to pull the pugs and check them, and verify the plug wires are installed correctly.
Ford - E150 :: 1996 - Misfire / Error Codes Came On
I have a 1996 Ford E-150 van that has a misfire. The plugs, wires, cap and rotor have been changed and I still have it. The error codes come up as cylinder 3. ( I was getting the same before I replaced everything.) Scanner also says lean on bank 1. It also says that the O2 sensor behind the cat is not doing much.
View 3 RepliesFord - Explorer :: 1996 - ABS Light Won't Go Off But No Error Codes
How do I get abs light to go off? I removed and cleaned all sensors, checked all wiring, fuses, and diode. I also used a a scanner, and it tells me there are no error codes. What do i do now?
View 12 RepliesPassat (B5) :: CEL On With Code 1476 - Error Reappears After Clearing
I have VW 1999 V6 Turbo Passat automatic Sedan.
It's Check Engine Light [CEL] is ON for a while. The code comes as 1476. The mechanic tried to erase the error, but CEL comes back after 60-100 miles. Clearing the codes works for awhile but Error reappears.
The code is for "EVAP Leak detection pump Malfunction/Insufficient Vacuum".
The local mechanic is not sure what to do about it and suggests me to visit the Dealer/showroom. After last time visit to the VW Dealer/ Mechanic, I am sacred to go again, due to exorbitant cost of the last repair. I don't think it was justified.
What should I do now? Where to start?
Bonneville :: 1996 Codes Don't Reset After Multiple Drive Cycles
Recently, I needed to go through DEQ and failed the first time with a cat sensor code. After going through a shop and having the cat replaced, I thought I was good to go, but the check engine light remained on. It is supposed to reset after a few drive cycles, but it didn't. I'd say I went about 50 miles and started the car around 10 times. I used a code reader to erase the codes and the check engine light hasn't come on since. And most importantly, I made it through DEQ.
[URL]
Ford Ranger / B-Series :: 1996 - Codes P1131 And P0401
Originally started with a p0302 code, and it cleared. CEL came back on with codes p1131 and P0401. First time with an 8 plug 4 cylinder. Truck has 263000 miles, and still original (metal) DPFE sensor. 1996 ranger 2.3L.....
View 1 Replies