Sonata NF (2006-10) :: How To Switch From Low To High Beams
Just purchased a 2009 Sonata and the dealer did not give me an owners manual. In a recent phone call he promised to be mailing one so with that said I've looked on countless forums about this tedious issue I am having. I can't seem to figure out how to turn my high beams on. All other lights are working correctly and from a diagram i read online its like any standard high beam, just pull the lever forward. I've tried every which way but can't even get the light on dash to turn on telling me the high beams are even available. I clearly see them in the front of my car. And driving at night they would make a big difference on those back roads.
View 4 RepliesCelica :: Headlights Adjustment - High And Low Beams
I just bought our 1st. Toyota 03 celica GT 5speed.113000 well cared for miles. My biggest concern is the headlight adjustment. The high beams are similar to aircraft landing lights but the low beams seem to cross with the left side too far to the center. I found the up-down adjuster (wish it had the cab operated feature) but can't find the left-right adjustment.
View 3 RepliesPrius (Gen 2) :: High Beams Go On When Headlights Turned On / Won't Turn Off
Anytime I turn the headlights on, the high beams go on too; I cannot switch off the high beams unless I turn off the headlights entirely (I have been driving with the low beams on during the day for the 5 years I have had the car)
I can find no reason for this; I'm inspecting the fuses (with little expectation). The only thing I can think of is the control switch or wiring. I have standard headlamps, not hid.
Nissan - 240sx :: Headlights - Only High Beams Work
I recently got this car from a friend, and when checking all the lights I noticed that only the high beams work, not the low beams. I replaced the lamps, and checked all the fuses, but the low beams still don't work.
View 3 RepliesSanta Fe (CM - 2007-12) :: Headlights Don't Work But High-beams Do
The normal lo-beams won't turn on no matter what I do, but the brights still work. The bulbs are good, the fuses are good. I've tested and changed those. They're good. 2008 Santa Fe ....
View 13 RepliesBuick - LeSabre :: 1999 - Cannot Turn Off High Beams Via On / Off Switch
99 Buick LeSabre ... I only have one low-beam working, the other low-beam bulb went out today ... When I switch to high-beams, the high-beams come on, but I cannot turn them off via the manual light on/off switch on the door panel ... The Twilight Sentinel works properly, and will shut off the high-beams per switch setting ... During the daytime, the high-beams will just stay on till I turn off the car, manual headlight switch won't turn them off ...
View 1 RepliesHeadlights - Chevrolet - Blazer :: 1997 Chevy - No High Beams
I have a 97 chevy blazer, that has no headlights. the daytime running lights, dash and marker lights all work but not the headlights or high beams?
View 4 RepliesPrius (2004-09) :: Faulty Combination Switch - High Beams Stuck
Headlight knob: rotated to OFF
Headlight lever: LOWBEAM position
Expected Results: headlights are completely off
Actual results: headlights are completely off (OK)
Headlight knob: rotated to OFF
Headlight lever: pulled into FLASH TO PASS position
Expected Results: highbeams on until lever is released
Actual results: highbeams on until lever is released (OK)
Golf IV / Jetta IV :: 2001- Headlights Malfunction - Only High Beams Are Working
So I bought an 01 GTI last week with a decent amount of things pre-modified including a Jetta front end swap? Anyway the guy I bought it from knew absolutely nothing about what had been done to the car other than the fact that there was an HID kit installed and it was set up to run high beams only.
I figured I'd remove the HID's until i drop some cash on a pair of nice projector housings. I removed them and plugged up some nice sylvania bulbs as per the OEM standard 9007, and figured I'd have no issues... They are still stuck on high beam only... What could be causing this?
Camry :: 2002 High Beams And Turn Signals Work But Headlights Not Working
I bought a used 2002 Camry (at a discounted price because of a few dings and dents) and the headlights are not working. The high beams and turn signals work but not the headlights. I changed the bulbs, checked all the fuses and got a new relay but still nothing. I brought it to an electro-mechanic and he told me the ECM was busted and that he could maybe grind it down. This seemed odd to me so I called my old mechanic in the states who said he has never heard of an ECM causing headlights not to work and suggested I install a toggle switch. Does this sound like it could work? Could I do this on my own? I'm pretty handy but am a little hesitant to try any electrical work on my car as I have no experience with electrical work.
View 3 RepliesPrius (2010-12) :: Headlights Surrounds Have Melted Sections In Front Of High And Low Beams
2010 Prius... Both of the outside clear poly carbonate headlight surrounds have melted sections in front of the high and low beams.
View 19 RepliesJeep - Wrangler :: 2007 - When Switch To High Beam Both Headlights Go Off
Just discovered that both high beams are not working. Regular lights ok. When switch to high beam both go off. I know some bulbs have two filaments, is this the case for this car? Are the bulbs burnt out or something else is wrong?
This is a 2007 Jeep Wrangler Rubicon Unlimited.
Ford Super Duty (1999-2016) :: Truck Only Has Low Beams / No High Beams
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: High Beams Only And No Low Beams After Installing New Headlight Bulbs
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
Ford F-150 - 1997-2003 :: Low Beams Don't Work But High Beams Do
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesFord Wiring/Electrical :: 1997 - Headlights / Brake Lights Cut Off When Hit High Beam Switch?
So I recently bought a 1997 7.3l F250. It is in fairly good condition, but it has some problems with the lights working. The turn signals and hazards all work, as do the tail lights and headlights. However, when I hit the high beam switch, the headlights cut off entirely. Also, the brake lights do not work at all. Ive checked the bulbs and since they all work Im not sure what the issue is.
View 3 RepliesChevrolet - Tahoe :: 1998 - Heater / Defrost AC Select Switch Sluggish?
1998 tahoe LT .. My truck selector switch has been acting up. when i turn the switch from defrost to AC mode it takes time before it moves the doors to the correct position. does something need lubed or do i have something that needs (or will need) replaced?
View 6 RepliesOldsmobile :: 1992 - Low Beams Do Not Work
my 1992 olds 98 low beams do not work. However they high beams do along with the parking lights. I used a test light and am getting no electricity at the light socket. Bulbs are good. I check all fuses under the dash not a bad one. What this is or the next step?
View 5 RepliesPrius (Gen 3) :: 2010 - Only High Beams Works / Low Beams Out
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?