Ford Wiring/Electrical :: 1997 - Headlights / Brake Lights Cut Off When Hit High Beam Switch?
So I recently bought a 1997 7.3l F250. It is in fairly good condition, but it has some problems with the lights working. The turn signals and hazards all work, as do the tail lights and headlights. However, when I hit the high beam switch, the headlights cut off entirely. Also, the brake lights do not work at all. Ive checked the bulbs and since they all work Im not sure what the issue is.
View 3 RepliesJeep - Compass :: 2007 - High Beam Went Off And Not Working Anymore
My hight beam went off and doesn't work anymore ..my fuse box is the problem and i dont want to replace it cuz its too expensive maybe a chip inside not work right and in my car when i switch the gear to d the hight beam turns on On 6 volts day and night . Now its doesn't work ether the 6 or 12 volts .. How to fix it?
View 2 RepliesLexus RC F 2015+ :: Low-beam Triple LED Headlights Aimed Way Too Low But High-beam Okay
My car is fully stock, with all options available to me (cold weather package not available here). The low-beam triple-LED headlights are aimed way too low compared to all my previous cars, and where they should be. BUT high-beam is aimed properly. So if I adjust the low-beams up, my high-beams might end up lighting up the trees, not the road.
If adjust the headlights up on a fully stock car (not lowered at the front)? Are the high beams still lighting up the road fine? And if you can be specific as the number of turns on the screwdriver, it'd be good too to have an initial adjustment reference.
Jeep - Wrangler :: High Rpm When Stopping Before Complete Stop
Jeep jk with hemi 7.2l manual ... Symptoms of high rpm when stopping before complete stop. And high room when shifting from one gear to another (usually bit drops between shifts). Recently I noticed that this happens only when shifting above 2500 rpm. So if the shifting happens before the rpm reaching 2500 it will be smooth and normal.
View 2 RepliesJeep - Wrangler :: 7.2 Hemi Engine - High RPM When Slowing Down
I own a jeep wrangler with a 7.2 hemi engine. Manual transmission. When driving and want to stop on a traffic light. The rpm will stay at 2000 rpm until complete stop and then it goes down to 850 rpm.
View 19 RepliesJeep - Wrangler :: 1999 - High Idle RPM And Hissing Noise
So as I was parking my car and I accidentally stalled it. So anyway I return to the car 20 minutes later to leave and when I start it up I notice the engine is idling at 2000 rpm and is making a loud hissing noise from the drivers side on the engine (I think). When I rev the engine it is slow to come back down to the 2000 rpm idle. When I put the car in gear and drive it, it likes to stay at 2000 rpm.
The car will accelerate without me pushing the gas pedal until it reaches 2000 rpm. Also when I shut the engine off, it sputters and coughs, almost like a backfiring motorcycle but rhythmically slowing down until it finally stops (around 3 seconds or so from when I turn the key off). The check engine light is OFF and the car is still "driveable" (I got it home) and typically idles around 900 rpm I think..
Jeep - Wrangler :: High Pitched Whistling Noise Coming From Under The Hood
There is a whistling noise that is coming from under the hood of my Jeep. It is more noticeable on cold days. It temporarily disappears when my foot is on the accelerator or after I have been idling at a stop sign for 30 seconds. The noise starts again when I start driving.
View 6 RepliesJeep - Grandcherokee :: 2005 - Lights Won't Switch To Low Beam?
Have a 2005 Grand Cherokee, problem when lites are on high beam & I switch to low beam the lites turn off.When I flick the switch they come back on. Also when signaling or wipers are on sometimes lites start flashingand or go out. Any clues?
View 2 RepliesPassat (B6) :: 2007 1.8T - Low Beam On Passenger Side Not Working But High Beam Does
This morning a dash light informed me a headlight bulb was out. It was my DTR light on the passenger side.
I purchased Sylvania H7 high intensity, installed it and it failed to work properly. Daytime light on only drivers side works.
High Beam on , both lights works.
I checked my manual and it said to check fuse in the 5 slot on the driver side dash/door panel and there actually is no fuse in there. I checked the driver side and there was no fuse there either.
I replaced my driver side bulb last year and it took 5 mins....i am already 4 hours into this!
Sonata NF (2006-10) :: Headlights Out (Both Low And High Beam)
Last week I smelled something burning when I arrived home. I looked around the car and did not see any smoke. I noticed the other night that I had no headlights (low or hi beam) The fog light work fine. No fuses are out.
View 2 RepliesJeep - Cherokee :: 1996 - Dashboard Blinker And High Beam Lights Come On
My 1996 jeep cherokee is having a problem with the lights when I pull the plunger switch my dashboard blinker lights and high beam light come on but none of my outside lights come on besides my tail lights.
View 4 RepliesAccent MC (2006-11) :: Headlights Operates In Low But Not High Beam
08 accent passenger headlight was noticed to not be operating while in low beam. Switched to high beam- it works, but still no low beam.
First instinct was replace the bulb. Low beam works but now.. high beam doesn't?? Bulbs are fine, brand new out of the box and driver's side works like a charm. Bright as heck... passenger's side isn't quite as bright If that's any relation to the problem.
Checked the fuses, they're all good. Made sure bulb was placed in secure. Filament didn't get bounced around either. Was poking around online and seems it could be the relay. Manual doesn't seem to list a relay for the headlights or am I not reading it right?
Passat (B5) :: 2002 - High Beam Switch No Longer Working
So, last night I go to turn on the high beams on my 2002 Passat (pushing the bar on the left of the steering column forward) ... and nothing happens. The bar clicks into place as it should, but no high beams. The little indicator light on the dashboard does not come on, either.
I try to flash my high beams, and that DOES work. The brights come on, and the little indicator lights up when the beams engage.
So ... I know it's not a fuse, since the lights are actually functioning. What part/switch/relay/whatever needs to be replaced to get this fixed? I feel like this would involve me needing to pull apart the mechanism in the steering column, but I hope not ...
Ford F-150 (2009-2014) :: High Beam Switch Not Locking On
my high beam switch works if I hold the switch in the forward position, but it won't stay on when I let go. Is there a fix without having to replace the switch?
View 4 RepliesJeep - Electrical-wiring - Cherokee :: 1996 - Headlights Switch Off Unexpectedly
The problem is that my headlights on my 1996 Cherokee Jeep XJ switch off unexpectedly. I can get them to come back on for extended periods by fiddling with the control knob in certain ways. This is the kind where you pull out of the knob to turn the lights on, and can rotate the knob to brighten or dim the dash.
If I pull a bit harder on the knob, the lights come on; if I twist this way just so, then off they go; that sort of thing. The fuses are fine and the contacts in the fuse box are clean. High beams work great no matter what (these are controlled from the steering column). I think the problem is at the control knob.
Now, how can I keep my headlights on when I turn them on every time without having to fight the gremlins? I think my next move is to remove the bezels and so on as best I can and get in there with some proper contact cleaner to see it's just built up gunk causing havoc. If that fails, or if that's a bad idea, what's next?
Ford F-150 - 1997-2003 :: High Beam Headlights Won't Working?
I added plow lights to my truck and something quit when I had the high beams all on at once. All 4 shut off. Low beams still working. What I fried or where to check? Its a 99 F250 superduty.
View 14 RepliesDodge - Dakota :: Horn Blows And Headlights Go From High-beam To Low When Gas Light Comes On
When my gas light comes on during the day my horn blows every couple minutes at night time the headlights go from high-beam to low-beam every couple minutes. Also, my check engine light is on more than it is off
View 4 RepliesLexus ES 2007-12 :: Both Low Beam Headlights Went Out
Both low beam headlights went out at the same time on my 2012 ES 350, What can I check for before I go to the dealer?
View 1 RepliesFord Ranger / B-Series :: High Beam Malfunction - Moving Forward Headlights Cut Out Completely?
I have a 1995 ranger four letre 5sp, dubbed Beula. I figured there'd be a few gremlins and there was and is, which I know to be more common than not in older trucks. The top priority is figuring out why when I push the lever for the high beams forward, the headlights cut out completely, whether in gear or not, and I don't know where to begin troubleshooting. I've surfed around the forums looking for answers and really only found conjecture.
View 14 Replies