Santa Fe (CM - 2007-12) :: Stuck In Drive While In Operation - Faulty Stop Lamp Switch
I have 2008 Hyundai Santa Fe......approx 10K miles......no major issues to date
Drove my son to school this morning and pulled into a parking spot.....the shifter would not move into PARK......it was stuck....would only go into NEUTRAL and DRIVE....the vehicle was idling
I was a little panicked, but put on the parking brake and called the dealership on the cell.....they told me to pop the cover on the switch near the shifter and and depress the reset button (needed a flat head screw driver).......it took about four tries and then finally worked.....
I shut the vehicle off, restarted it and tried to put the car into REVERSE...to back out of the parking spot......shifter was stuck again.....had to depress the reset button......
Immediately took the car to the dealership where it was DIAGNOSED with a faulty "stop lamp switch".......causing the shifter to stick and the brake lights not to work... this was a recall item for the 2007 Santa Fe, but not the 2008 (that I'm aware of)
Dealership replaced the stop lamp switch and had me in and out in a hour.......but they did not initially give me a write up......i told them this was a very dangerous situation that had just occurred and I wanted a write up.....they happily complied....
So keep a flat head screw driver (glove compartment) in the car and have your dealership take a look at the stop lamp switch, on your next visit, even though it was only recalled on the 2007.......I will also be contacting HYUNDAI directly...
ETA: ESC light was illuminated when I was trying to get the vehicle into PARK from DRIVE......also contacted HYUNDAI and gave them a description of the incident and now have a case number.
Sonata NF (2006-10) :: How To Switch From Low To High Beams
Just purchased a 2009 Sonata and the dealer did not give me an owners manual. In a recent phone call he promised to be mailing one so with that said I've looked on countless forums about this tedious issue I am having. I can't seem to figure out how to turn my high beams on. All other lights are working correctly and from a diagram i read online its like any standard high beam, just pull the lever forward. I've tried every which way but can't even get the light on dash to turn on telling me the high beams are even available. I clearly see them in the front of my car. And driving at night they would make a big difference on those back roads.
View 4 RepliesPrius (Gen 3) :: 2010 - Only High Beams Works / Low Beams Out
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
Oldsmobile :: When Hit Dimmer Switch To Select High Beams, Headlights Cut Out
I have a 1941 Oldsmobile and when I hit the headlight dimmer switch to select high beams my headlights cut out . My car has all original wiring and I suspect a short at one of the terminal blocks. I am unsure how to troubleshoot this problem. I cannot select my model number below I have a model 76 Dynamic Cruiser.
View 19 RepliesBuick - LeSabre :: 1999 - Cannot Turn Off High Beams Via On / Off Switch
99 Buick LeSabre ... I only have one low-beam working, the other low-beam bulb went out today ... When I switch to high-beams, the high-beams come on, but I cannot turn them off via the manual light on/off switch on the door panel ... The Twilight Sentinel works properly, and will shut off the high-beams per switch setting ... During the daytime, the high-beams will just stay on till I turn off the car, manual headlight switch won't turn them off ...
View 1 RepliesPrius (2004-09) :: High Beams Went Out - Replaced Relay But Situation Persists
My high beams went out a few months ago on my 2008 prius. They told me it was the relay. I just replaced it today with a relay from advanced auto parts. My highs work now. But as of 2 hours ago I noticed my lows are no longer coming on. A few days ago I picked up the car after having aftermarket hids put in. The lows were working then highs still no. A few weeks ago I had some other relays replaced and they told me the cap was off and water got in it.
So could it be that my low relays have gone bad now too. It seems weird right when I fix my highs my lows stop working. If its possible I want to try a new relay to see if that fixes it. But I need the part number and location in the relay box. I can post a picture of the inside of my relay box, can't point to which one it is. I am sure it even has the part number on it.
Prius (2004-09) :: Combination Meter Failure And Loss Of Brakes / Power Steering
Faulty combination meters on the Toyota Prius. Loss of braking and power steering on the vehicle? This has happened to me 4 of the 100+ times my dash lights were not working. On those 4 occasions I was driving without the dash lights and all of the warning lights came on and the car lost power steering and the ABS braking and I had to use the emergency brake to stop. Fortunately when this has happened I have not been on the highway and there was no snow or it could have been very dangerous.
This issue has only happened when there is a malfunction with the combination meter. I understand this can create many issues within the vehicle including braking difficulties. The response of the Manager at my local Toyota shop said "well, at least you have brakes, you just won't have them in an emergency stop." Wow! I've read accounts of people going 65 mph and losing brakes when this has happened which could be very deadly.
I'm surprised at Toyota's response with this possibly deadly issue. I'm also surprised that the Combination Meter Failure has not be recalled because based off what I have read about 3% of Prius owners have experienced issues with this and the braking system. At what point does a "warranty" become a "recall"? Please note that this issue is separate from the "accelerator recall".
Ford Super Duty (1999-2016) :: Truck Only Has Low Beams / No High Beams
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: High Beams Only And No Low Beams After Installing New Headlight Bulbs
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
Ford F-150 - 1997-2003 :: Low Beams Don't Work But High Beams Do
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesGolf IV / Jetta IV :: Low Beams Went Out / High Beams Functional
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
Accent RB (2012+) :: Low Beams Stay On With High Beams
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
Ford Wiring/Electrical :: HID Low Beams But No High Beams
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 RepliesPrius (2004-09) :: Passenger Headlight Stuck On High Beam
So I had an issue with my hid lights, I replaced one ballast and 2 new bulbs and they work fine now but the passenger side is stuck on high beam. When i turn on the brights only the driver side gets brighter, how to fix this? I only replaced the driver side ballast
View 3 RepliesLexus GX 2004-09 :: Spotlight Won't Come On With High Beams
I have installed 3 Hella Luminator HID. I am having trouble connecting them to the hi beams. I've had a friend install them and for some reason, they just won't come on together with the hi beams. I have to turn them on with a separate button which is not very practical while driving.
Is there an electric schematic I can download or something else?
Gmc - Yukon :: 2004 - Signaling Right High Beams Come On?
I have a 2004 GMC Yukon SLT, 2WD. At night, when I signal right, my high beams come on. After making the right turn, my signal disengages and the high beams return to low. Now I only make left turns at night.
View 1 RepliesPrius (Gen 3) :: Name And Purpose Of Bulbs Right Above High Beams?
I don't know the official name, but it's right above the high beams, it stays lit if you just have your side lights on too. BTW, what's the purpose of it since we really don't have DRL's?
Modifying it with a different bulb, if so what's the size? Same ones as the interior map lights?
Prius (Gen 3) :: Only High Beams Work, Others Became Dead
Just replaced my headlights within the past 4 months. Last night, I go to turn on headlights and nothing turns on, not even the parking lights. High beams work just fine. Checked fuses this morning - fuse for low beams is fine. Not sure why all 4 lights would fail at the same time. A fuse was all I could think of besides pure coincidence.
View 4 RepliesPrius (Gen 2) :: 2005 - High Beams Not Working
I'm a new owner of an 05 Toyota Prius. Im loving the car so far, however, i am having an issue with my high beams not working. After doing lots of research it looks like the high beams on the Prius comes from the same bulb, what controls the high beams is the reflector.
My low beams and all other lights are working fine. After removing my bumper and looking through all the wiring I have noticed that their are two plugs that are not attached to anything. The lights look brand new, so my thoughts are that this car had HID lights and they were then replaced to non-HID lights.
How to get the high beams working. I don't see any HID ballast anywhere, so converting it back to HID would be costly since i would need new headlight plus ballast and bulbs.
I tried looking for wiring diagrams but can seem to find any.
Here is the link to some images: Prius Photos by Izzy25323 | Photobucket