Mazda - Mx-6 :: 1993 - Shudders When Idle Or Go Less Than 10 Miles An Hour

I have a 1993 Mazda MX-6. For the past 2-3 years, my car shudders when it idles or goes less than 10 miles an hour. More and more lately, it has been shutting off completely when I drive slow or come to a stop. The first few weeks it was happening, one day while in a Burger King drive-thru (of all places- how embarrassing), it shut off and I couldn't get it to start again.

The mechanic I took it to replaced the distributor to fix it. It has not had a problem starting anymore since then, but it still shudders very hard. Could it be something else that's wrong?

I have also discovered that turning on the air conditioning keep the RPMs to stabilize, and the higher I turn the A/C, the more power it seems to get. Don't know if that is related.

View 2 Replies

Mazda - Protege :: 1994 - Brake Pedal High And Hard And No Response When Depressed

A couple weeks ago the front brakes were done on the Mazda. Then the wheel bearings needed to be done. I think the shop outsourced what I guess was the packing of the bearings. I paid for the work, and drove away, nearly, but didn't because I had no brakes and there I was pulling out into 5:00 PM traffic. The emergency brake saved me. I walked back into the shop and they discovered the power brake booster had broken. I wonder, because if you drove the Mazda to park it in the shop lot where the customers pick up the vehicles after repairs are made, wouldn't you notice that there is no braking action. The brake pedal was high and hard and there was literally no response when I depressed it.

The shop keeper said, darn I guess I'll have to replace this, meaning pay for it, since it (may have) happened when the bearings were being worked on. My question is, is there any reason why working on bearings might end up breaking the brake booster? Chances are, it was just coincidence, right? or? I don't know. Because the car is old, he had to take several days to find the part. Anyway, he sent me off and told me to drive it carefully. The drive home was absolutely nervewracking and required continual tugging up on the emergency brake stick. I wonder if they despise my car so much now that they are sending me off to drive in it in such an unsafe condition. Anyway, hoping it will be fixed tomorrow. But my question still is ... would working on bearings possibly be cause for breaking the brake booster?

View 9 Replies

Mercedes-benz - C-class :: C240 - High Pitched Whine And Would Not Accelerate More Than 15 Miles Per Hour

3 months ago, my 2003 C240 Mercedes made a high pitched whine and would not accelerate more than 15 miles per hour and if I did go faster the whine got louder and higher in pitch. I took it to the local “foreign car” auto shop (I have had the car serviced there in the past) and they replaced what I believe that said was a “contact plate” something that controls the transmission is what I think I remember. Yesterday (just 3 months later) the exact same issue is occurring. Again I had it towed back to the auto shop and now they tell me the transmission is shot and they will need to replace it. They added it has nothing to do with the plate they replaced/installed 3month ago and they will give me a credit on the plate that installed 3 months ago. Are they correct?

View 2 Replies

Golf IV / Jetta IV :: 1999 - Hard Shifting Between 2nd And 3rd Gear Or 35 Miles To 45 Miles Per Hour

I had my transmission fluid changed because it was leaking from the pan. I did the job myself but called VW to confirm how much fluid I needed. They told me the wrong amount but we realized that after we did the job.. they did the repair for a huge discount and I only paid $200 bucks for the work for them to "fix" what they messed up. Volkswagen did it and I got the car serviced at the end of April basically. now its the first week of July and under 90 days since the car was service and now it is shifting hard between 2nd and 3rd gear or 35 miles to 45 miles per hour. The car isn't throwing a transmission code I have a vag com and there is no code coming up on that.

View 1 Replies

Camry :: Gen 6 - Excessive Wind Noise In Cabin When Traveling Freeway Speeds

Have excessive cabin wind noise in your Gen 6 when travelling Freeway speeds. I know there would be some noise but when passengers mention it and we talk louder than normal then i think its an issue. It is kinda loud now...

View 2 Replies

Ford Super Duty (1999-2016) :: 2010 F250 Whistling Noise While Traveling About 70 Down The Freeway

I have a 2010 F250 extend cab 4x4. While traveling about 70 down the freeway I get a whistling noise. It is usually worse when the wind is blowing hard or behind a semi. Wind makes the noise louder so I assume the noise is coming from the air hitting something. Slow down to 50 and noise goes away. Do not think it is mechanical because when a gust hits the truck it is worse. Checked all the windows, windshield and rubber parts. Where I should look.

View 9 Replies

Prius (Gen 2) :: 2004 Won't Accelerate And Shuts Down After One Hour Of Freeway Speed

After one hour of freeway speed (60-80) the car slows down to a stop and red !triangle! light comes on. After coasting to the shoulder and waiting 10 minutes, car restarts. This has happened 3 times in the last two months (very frightening, but luckily it was light traffic). Dealer says 'no codes' and that there is nothing to fix!!!! What now? I can't drive a car that could lose power at any moment. Big safety issue....

View 6 Replies

Accent LC (2000-05) :: 2001 GL Started Revving When Driving During Traffic Hour - Transmission Slipping?

I have a 2001 Accent GL 1.6L Automatic.

Yesterday it started acting up on the freeway. I was driving about 50 during traffic hour when it started revving. I got off the freeway and moved to 35mph on surface streets, the revving continued at lower speeds but much worse (4-5k rpms going 10-15mpg). Doesn't seem to do it in idle or park. If i shut the car off it'll drive fine for a while then start acting up but when I was driving, after awhile, it did return to normal.

What could cause the problem? TPS? Transmission? Sensor of some sort?

View 5 Replies

Mazda :: 2002 Protege 5 - Hesitation At 3k Rpm

Have 2002 mazda protege 5 . During acceleration at 3000 rpm the engine hesitates. Computer said o2 sensor, replaced it but that wasn't it. Drilled out both catalytic, that wasn't it. Found hole in mass air flow tube, figured that is it. I haven't replaced that yet, however I used gorilla tape thinking it would be a temporary fix but that didn't work. I know I need to replace that tube, but think that it may now be a fuel pump issue??

View 5 Replies

Mazda - Protege :: 1999 - Won't Start When Hot

I have a 1999 Mazda Protege. As of last summer it started giving me problems with not wanting to start after I had driven it around town for a little while. (IE: to the grocery store, to the bank and then to my sister's house. It wouldn't give me the same problem if I just went to the grocery store and back home. It would start up fine and I'd be on my way. Only when I went somewhere and shut it off then repeated that a couple more times.) I took it to a mechanic who wholeheartedly believed it was the coil packs not allowing my car to function properly.

So we replaced those and everything seemed on the up and up. (Keep in mind that this was towards the end of summer and the temperature was dropping.) The car was perfect all throughout the fall and winter, but now that the temperature outside is starting to rise again it's beginning to do the same thing it did last summer. I don't want to take it to another mechanic that's going to have me dish out an extravagant amount of money again only for the problem to persist.

View 5 Replies

Mazda :: Protege ES 1.8L - Rattling And Knocking Front End

2000 Mazda Protege ES 1.8L

What's a good way to find whats the cause of all the rattling and knocking in the front end of my car when going over uneven terrain? It seems that noise appears only if one of the wheels is lifted up a little bit. I am attaching a picture describing the "motion" here:

Steering wheel doesn't shake when driving at high speeds and is fairly stiff, but it does pull to the right a bit, maybe because I didn't perform a front end alignment (I know this is not good) after I had most of the stuff in the suspension of the replaced; all 4 struts + boots + mounting blocks, ball joints, control arms...

Now the only part, I didn't replace was the sway bar link on the passenger side and it's being knocking for 3 years. The one on the driver side was replaced at the time the struts were replaced but I didn't have enough money to pay for the other one.

Another mechanic told me when I was quoting that sway bar links aren't really necessary as a safety feature, and a google search showed me that there are people that just take the sway bar off the car, so I left it there and just tried to live with the noise. now I am noticing the driver side is knocking as well, and I am wondering if it has to do with because I didn't replace the one in the passenger side?

I just want to rule out the possibility of another component being the cause of the noise because I am prioritizing safety over ride comfort in my attempts to save some money.

View 5 Replies

Mazda - Protege :: 1996 - A/C Isn't Blowing Cold Air

it was over 100 degrees today in Lawrence, Kansas and on the way home from work, the air conditioner stopped making cool air. Hot air now comes out. This is a different problem that the poster before me seems to have. Mazda Protégé, 1996, 128,000 plus miles on it.

A reconditioned one was installed in 2006, compressor replaced in July, 2012.

View 6 Replies

Mazda - Protege :: Loud Tire Noise Between 20 And 40 Mph

I read here that some tire noise can be caused by bad belts. How do you know if the tire belt is bad? My tires get loud between 20 and 40 mph. Mechanic says the tires are OK but to replace them to get rid of the noise.

View 7 Replies

Mazda - Protege :: Brakes Stuck And Burning Up

Basically, my car (2002 Mazda Protege) has been acting like my brakes are engaged. Not all the time, though - The first time I get out and drive it, it drives smooth as silk like always. But then after I put it in park and then get back in and head out (I'm a delivery driver, so this is constant), sometimes it feels like the brakes are constantly being pressed. No, the emergency brake is not on. Most of the time it's almost not even noticeable so, like an idiot, I put it off for the past week. But today, it was very, very, very bad. I was having to press the gas to the floor to get up to speed, and then it was constantly trying to slow down. My brakes were definitely getting burned up while it was doing this, but luckily it stopped.

It may be unrelated - I know I have an oil leak, but today I saw a very unusual spot where something leaked out in my driveway. I checked my oil, and it was where I expected it to be, but this was a relatively large stain which would be very unlike my current leak.

View 6 Replies

Mazda - Protege :: Little Hesitation And Jerkiness During Acceleration

Started my car yesterday and as I was accelerating, it made a very loud noise. It sounds like normal engine acceleration noise, only ten times louder. It was present whenever I accelerated, but not when I was coasting or idling, and not when the car was in neutral. (It's a stick shift.) During acceleration, there was a little hesitation and a little jerkiness, but not horrible. The problem came on suddenly - no problems with the car before yesterday.

View 4 Replies

Mazda - Protege :: Generator Or Alternator Same Thing?

My Mazda 1996 Protege appears to have no alternator, but there is something called a generator. Are they the same thing?

View 19 Replies

Mazda - Protege :: Dashboard Lights Cutting Out

Here's a quandary for those who know more than I do:

I have a 2000 Mazda Protege with 182,000 miles on it. On occasion my dashboard lights (and radio, for that matter) cut out, going completely dark. Now here's the kicker: If I give the dashboard a little tap with my hand, everything comes back all glowing and lit.

My fear had been the alternator was going bad (Again!), but since it seems to be coming back with a bop on the dashboard...is this just a loose ground? What should I be looking for? Is this something a novice like myself could be taking care of, or where should I be directing my mechanic?

View 5 Replies

Mazda - Protege :: 2003 - CEL Came On Again / Engine Without Motor Oil?

I have a 2003 Mazda Protege. I had the check engine light come on and took it to my local repair shop. They diagnosed it as a bad oxygen sensor. They replaced it, but a week later, the light came back on. So, I decided to take it to the dreaded dealership and pay for their "expertise". They informed me that the light was a result of a intake hose with a hole in it. They also told me that the vehicle's oil pan was rusty and needed to be replaced. The vehicle did not leak oil. After a week of driving, I noticed spots of oil on my driveway. I checked the oil and it was low, so I decided to have it towed back to the dealership to have it checked out. I assumed it was the oil pan that had not been installed properly.

Today, the service tech informed me that my engine was blown and needed to be replaced. He told me that this cam warped and didn't leak before because the pressure was being release through the rusty oil pan. This sounds absurd to me. It seems to me that what has happened is their responsibility. What could have caused this? A co-worker suggested that more than likely the mechanic could have made a mistake and started the engine without motor oil either after the oil pan was replaced or after the vehicle sat overnight and the oil drained out. Does this seem more logical? If the dealership is at fault, but will not fix it, what can I do?

View 19 Replies

Mazda - Protege :: Stalling But Would Never Loose All The Power

I was driving my car on the highway, stopped to get gas and it started stalling but would never loose all the power. The check engine light did not go on. They have replaced spark plugs, hoses and it keeps doing the same, they told me there could be water in the fuel i pumped so i burned through the gas, drove 5 hours back home and when going uphill i would give it gas the rpms would go but no speed.

I took it to the ford/mazda dealership in town and said that the codes it was giving em they could not decipher, their best guess was a timing belt issue, they suggested i took it to an exclusive mazda dealership...but the closest one is 3 hrs away. They said it wasn't my transmission. There is no set speed when it stalls..it does it often maybe every 20 seconds or so...the car is a mazda protege 2000 with about 140000 miles...

View 6 Replies