Ford - Windstar :: Gear Shifter Does Not Engage Properly
Our cars shifter does not engage properly to Drive position. It comes down to D but the car just revs up or does not pick speed when we hit gas. we have to adjust/move it up and down to engage it. other position seems to be working fine. what could be the problem?
View 6 RepliesGolf/GTI VI :: Transmission Shifter Goes Into 5th But Would Not Engage
Out of nowhere the car wont go into 5th, so I need to check the cables adjustment and if that doesn't work go from there. This car as of now is nothing more than a daily driver, never driven hard. I bought it last June with 40k on it and as of today it sits at 68k. Happened Friday worked fine on the commute to work, but on the way home once I got on the highway I noticed it would not engage 5th. Does not grind, pop, or anything. It is like the shifter goes into 5th but the cable has been shortened to not engage. This may be the issue but reverse, and 1st-4th work great with no issues.
I also read about the narrow oiling holes for the 5th gear and they are very easy to starve when temperatures get too low, which it has been roughly 0-15* here. I also read that the seal on the transmission gear shift unit (0A4301230H) can get worn out and allow back and forth play in the shift unit. Lastly the 5th gear is pretty weak and teeth like to shear off.
I had installed new shifter bushings the week I bought the car, and the fluid was flushed and replaced with Liqui Moly and their MoS2 additive about 5k miles ago. I'm hoping it is just the cables out of alignment due to the cold, but if not I will explore the options, as I have priced out all of the replacement parts and it'll be around $1k to replace the gear, 5th synchros, shift fork, and the gear shift unit. So a 02Q might not be out of the question.
I tried to manually pull up on the selector and move it right into the 5th position. Would not engage, so I am lead to believe that something is either wrong with the selector shaft of the transmission or the 5th gear itself.
Chevrolet - Blazer :: 1995 - Shifter Goes All The Way Up But Park Does Not Engage
Have a 95 Chevy blazer 4wd automatic on the column. Tonight I pulled in my house put it in park and turned it off. Took my foot off the brake and it started rolling. I noticed it didn't go in to park. I tried a free times and the shifter goes all the way up but the park doesn't engage and the light doesn't come on. I put it in neutral and used the e brake but am wondering what caused this and if it could be a big problem in the near future.
View 1 RepliesFord Excursion :: 4x4 Selector Switch On Dash Lights Up Properly But Auto Hubs Don't Actually Engage
My Excursion is having an issue with the 4x4 system. The. 4x4 selector switch on dash lights up properly for 4x4, but the auto hubs don't actually engage. The hubs will lock only if I manually lock the hubs. I can hear relay click, so I don't think its electrical. The hubs had new o rings installed when I did front ball joints a few thousand miles ago, and the 4x4 worked fine up until today.
View 5 RepliesFord Excursion :: Reverse Lights And Back Up Alarm Will Not Engage - Gear Shifter Adjustment?
My reverse lights and back up alarm will not engage unless i hold up on the shifter while in reverse the only thing i found was a adjuster for the indicator....
View 14 RepliesFord Super Duty (1999-2016) :: 2015 - Delay In Transmission To Engage When Start And Put Shifter In D
2015 F-250 4X4 CC gas truck. 6R140 Transmission..
My truck has 6500 miles on it and since day one when I put my shifter in (D) there is a 3-4 sec delay in the transmission to engage every morning when I start out, rest of the time there is no delay even when the truck sits all day at work (about 9 hours). I have read in 2011 (?) that the transmission was loosening it's prime and would cause this problem, so how it's got me thinking.
Ford Super Duty (1999-2016) :: 2003 F350 Sounds Like Shifter Motor On Transfer Case Is Trying To Engage
Truck is an 03 F350 with the 6.0. It sometimes sounds like the shift motor on the transfer case is trying to engage. It has the vacuum system which is blocked off. Warn aftermarket hubs. Switch on the dash with 2wd, 4wd and 4 low.
It's kind of an off and on thing. Try to engage for a few or more seconds then nothing for awhile then repeat. It sounds like it's at the transfer case. It could very well be coming from firewall/engine bay area as well. Is there anything between the dash switch and the motor?
Elantra XD (2001-06) :: Shifter Seems To Be Very Slightly Loose
My 2006 Elantra is having a problem I think within the shifting box area. When the cars and park I have a 50-50 chance of the vehicle starting. This does not have anything to do with the break or the switch on the side of the shifter. The transmission while driving is fun and there is no slippage between the gears.
I've opened up the gearbox area and I found we're at the shifter hard into park forwards the car seems to start more consistently. The shifter seems to be very slightly loose. The little orange marks indicating the placement of the shift is not "aligned" with park. It's a bit off. However when I opened the gearbox and I push the cable on the right of the shifter forwards and turn the key, the car consistently starts. Now, I'm wondering if this problem with the cable or maybe a switch in the front? Parts to replace?
Santa FE SM (2001-06) :: Shifter Pops Out Of 5th Gear
The shifter will not usually stay in 5th gear for very long. The clutch and flywheel were replaced a few weeks ago just before i purchased the car but this problem has only cropped up in the last week. Could it be shifter linkage adjustment?
View 3 RepliesIsuzu :: 2001 Vehicross - Brakes Are Not Working Properly
I have a brake problem on my 2001 Isuzu Vehicross that has mechanics at 3 garages stumped.I bought this SUV in Dec 2013 and drove for 9 months with no noticeable problems.
At PA state inspection in Sept 2014, all 4 brakes and rotors were replaced. Since then the brakes slowly started to not engage when the pedal is first pushed. It progressed until they didn't engage until about an inch from the floor.
In Nov 2014, the brake lines were checked for leaks and bled twice. Each time they worked fine for a few days, then started to not engage again. A friend suggested maybe it was not brake fluid in my brake line. A mechanic assured me they contained brake fluid. Needless to say, I did not drive this SUV much over the last several months.Then in July 2015, another mechanic thought it was the master cylinder so I had that replaced. It did not fix the problem.
It has progressed to the point where I can feel they are engaging when the pedal is close to the floor, but not very strongly and I travel further & further until I finally stop.There are no dashboard indicators, nor codes on a diagnostic computer showing a brake problem. I have never seen brake fluid on the ground under the vehicle. What might be causing this brake problem?
Elantra XD (2001-06) :: Cruise Control Not Working Properly
I have this weird problem with the cruise control of my 2002 elantra gt: I cannot set the cruise control at 30 or 40 mph, but I can do it somewhere above that (just went to the highway and set it around 60 mph). What could be the problem? Do cruise control systems need calibration or would I have to replace it?
View 2 RepliesPassat (B5) :: 2001 - Won't Start Properly - Electronics Are Not Working
My car is a 01 b5.5 1.8t 5 sp manual transmission. it has 170xxx miles on it and for some reason, it won't start. last year I had some trouble with it where it would either start right up, or nothing at all, and it's doing it again, except now it just won't start at all. you turn the key, the battery engages, and all the electronics work (aside from the power windows, and sunroof), but there's not even an effort by the engine. it's like I didn't even turn the key. All last week, it was doing it, but I would just disconnect and reconnect the battery and it was fine. yesterday morning it just stopped trying. What could be the issue? it's really weird....also before this, I've been having a lot of trouble with once the cars been running for about 5 minutes or so, the power windows and sunroof decide to not work. but when I turn the car off and back on their fine. its odd. also, the alarm horn will honk randomly a single time. my electronics are all messed up
View 3 RepliesGolf IV / Jetta IV :: 2001 - Cooling Fan Not Working Properly
I am having issues with our 2001 vw jetta wolfsburg edition with a AWW engine the cooling fans not working properly. I had a bad fan and replaced it and since changed the thermo fan switch and the module under the battery and still no luck. With the key off I can jump the fans via the plug for the fan switch only low speed works with the key off. with the key on i can get both speeds of the fan to operate. With the ac on the fans operate.. normal driving the fans will not operate. and the engine will overheat and fans will not go on. Any other relays or sensors that could be faulty?
View 2 RepliesPrius (2001-03) :: Rear Brakes Won't Release Properly?
I have a 2001 Prius, with disc brakes both rear and front.
View 1 RepliesGolf IV / Jetta IV :: 2001 - Shifter Won't Shift The Transmission All The Way?
I have an 01 Jetta, 2.0L, 5 Speed manual transmission.
The issue seems to be that the shifter wont shift the transmission "all the way" into 1st, 3rd, and 5th gear. When I shift into the gears that are forward on the shifter, it will go into gear, but then the shifter (in the car) moves back toward neutral a little. I can drive in 1st no problem, but in 3rd and 5th some weird stuff happens...
While driving, when I shift from second to third I have to keep my hand on the shifter otherwise I get kicked out of gear. Also, when I drive on the highway, I periodically get kicked out of 5th gear if I don't keep my hand on the shifter (usually, when I let off the gas).
Anyway, being that I've fixed many problems on many cars by searching forums and google, I spent the last few days trying to figure out the problem by looking through the forums, but I have yet to find a solution. I tried adjusting the shift linkage using the method described in the dieselgeek video on youtube [URL] ...., but it didn't work. I'm pretty certain it's not the shifter bushings because i have almost no play in the shifter in neutral.
I had someone cycle through the gears while I watched under the hood, and its clear that the cable that controls the forward and back part of the shifting is not pulling back far enough on the counterweight on the transmission. (When shifting into 1st, 3rd, and 5th.) When the shifter puts the tranny into these gears I can still move the counterweight on the tranny further than the shifter will pull in in the same direction.I tried adjusting the linkage to compensate for this, but the cable is as far into the cable end as it will go...
Ford - Taurus :: 2001 - Heating System Won't Work Properly
I own a 2001 Ford Taurus 3.0 OHV V6. What would cause the heat to not work properly? The engine temp gets into the operating range as it should and the coolant flows well. I'm just not getting more than 10 degrees above outdoor air from the heater.It doesn't matter where the controls are set, anywhere from defrost to vent makes no difference.
View 5 RepliesSanta FE SM (2001-06) :: 2002 - Code P0715 / Car Won't Shift Properly
My brother and father just finished with all of the small issues after throwing in both a "new" engine into the vehicle and a transmission..both have around 80K miles (chassis has around 180K). There were some issues with codes after both were installed, but then everything was diagnosed and fixed, vehicles codes were gone and vehicle was able to be registered, afterall.
Anyways, now the car threw a P0715 code and has issues with shifting. It appears that the Santa Fe is stuck in a single gear (appears to be a higher gear). The car won't shift properly, especially noticed at higher speeds in a main road. Using tiptronic does not seem to make a difference. After the car sits and is taken around the neighborhood, it seems to drive fine, until it is taken out into a main road...I'm guessing once it heats up?
So, what should be looked into? A sensor? Is it maybe because this "new" used trans was swapped in and all of the trans fluid was replaced with new fluid? What could the issue be? I guesss the car's been a headache but they're trying to get it finished to avoid any further codes/issues.
02' Santa Fe 2.7 FWD
Santa FE SM (2001-06) :: Gear Shifter No Longer Moving Easily
When I went to put my car into gear today (automatic gear box, 2004) the gear shifter was very hard to move, as if whatever automated its ease is no longer functioning. And i'm pretty sure the steering and brakes are not performing with their power aided functions either. Is this a set of servos all on one line somewhere? Fried? Just a fuse?
View 6 RepliesElantra XD (2001-06) :: Manual Transmission Grind When Moving The Shifter From 1 To 2
I recently started having an issue where when I shift from 1 to 2 I'll get a quick grind of the gears. Here are the circumstances:
- the clutch is completely depressed, just the act of moving the shifter from 1 to 2 causes the grind.
- only when the car is moving.
- one time I was driving and coasting for a while just shifting back and forth from 1 to 2 with the clutch fully depressed and it kept happening.
- if I shift really slowly I can usually prevent it from happening, though I don't think it's RPM related.