Toyota - Corolla :: 2005 - Grinding Noise From Front Right Wheel
I recently brought my 2005 toyota corolla to my mechanic to give my car a check up as i will be going on a three week road trip soon.Upon assessment, my mechanic told me that my front right wheel bearing was making a strange noise and that i should replace it. I went ahead and had it replaced. after i had it replaced the front right wheel area was still making a grinding noise (louder than before it was replaced). I brought it back and he replaced it again with a new wheel bearing.
Again after the 2nd replacement it continued to make a load crunching, grinding noise when ever i brake the car. So once again, i brought it back. I thought perhaps it was my brake rotor and had him check that. He did just that and said the break was fine. He said it may be because the axl was not sitting true. so i had the axl replaced. well today i picked up the car and drove it approx 5 miles and the same crunching/grinding noise persists!!! I brought it back and it is once again being worked on. I need it fixed and am worried that my car won't hold up for my upcoming 4000mile road trip. I have attached a video clip of the sound to this post.
Corolla / Matrix 2009-13 :: Toyota Making A Loud Grinding Metallic Noise On Front Left Side
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 RepliesToyota - Corolla :: Grinding Noise When Starting
My 2009 Toyota Corolla has started to make a grinding noise when starting. The sound is identical to when you try to start an idling car. What the problem is?
View 7 RepliesToyota - Corolla :: 2009 - Grinding Noise While Turning Right
I have 2009 corolla with 70000 miles on it. I replaced new brake pads. I have some metal grinding noise when i turn right only. I tried looking online and got few similar problem faced by other people. I am not sure if its exactly same issue. No accident damage. Mostly driven on freeway.
1) noise looks similar
2) I do not get noise when i accelerate
3) for car this old is it expected ?
Toyota -corolla :: 2014 - At Start Up Grinding Noise?
When I start my car (usually a cold start) I hear a TERRIBLE grinding-like noise. Other times it sounds like a shuffling noise. And then other times it's like its over-exerting itself trying to start up. I've taken it to the dealer many times as it's a 2014 Corolla. They have no answers. The claim it's just a characteristic of the car. I call bull. This isn't normal for any car. My car has a CVT transmission by the way. Could it be the starter? Spark plugs? Note: the noise is about 1000x worse in winter. Audio is attached in separate comment.
View 19 RepliesToyota - Corolla :: 1998 - Grinding Noise When Let Off The Gas And Engine Goes Down To Idle
I have a '98 5-Speed Corolla. If I rev the engine when the car is in neutral and warming up I hear an odd grinding noise when I let off the gas and the engine goes down to idle. The noise does not occur if I put my clutch in. Is this something to worry about?
Also, I'm wondering what CV joints sound like when they're failing.
Toyota - Corolla :: 2005 - Making Grinding Noise While Shifting?
Our 05 Corolla, 160,000 miles, has started making a grinding sound when we upshift into 3rd, unless we let the rpms fall to below 1000. My husband said the clutch needed adjusting, but the dealer said this clutch is not adjustable. The dealer found nothing wrong and could not get the car to make the noise while in the shop. (It did actually get better for a while but got worse again almost immediately after the visit to the dealer.)
Our other car (a Saturn) has over 250K miles on the original clutch, so I don't think it's our driving. What could be wrong, and is this something that needs to be addressed soon lest we damage something irreparably? Also, this car has, since purchase, been nearly impossible to shift on the coldest mornings. Really, sometimes it is all I can do to get the lever in reverse to back out of the drive in winter (in Kansas). Warming up works, but it seems to take an inordinate amount of time before shifting is"normal."
Toyota - Corolla :: 2008 - Engine Runs But Car Does Not / Loud Grinding Noise
I was driving my car today, and I stopped at a stop sign. When I went to go, I pushed the gas, and my car revved up, moved forward, then all of a sudden it made a loud grinding noise (Like I was dragging metal sheets), and the gas stopped responding (but the engine was still running). The car still turns on, but whenever the gas is pushed, it doesn't go and makes that awful noise. What could be wrong?
View 2 RepliesToyota - Corolla :: Metal Grinding Noise - New Pads Resurfacing When Replacing Rotors?
I replaced my pads 3 months ago. Now I have a metal grinding sound (not squeaking). The mechanic says I need new rotors, and he will resurface the pads. I know I can replace the rotors myself; but do I need to resurface the 3 months old pads? If so; how will they resurface them?
View 4 RepliesToyota - Corolla :: 2007 - Metallic Grinding Noise When Turning Into A Parking Spot
My car has been doing this more. When I turn into a parking spot or my works' parking garage my car front end makes a Metal Grinding noise But it does not make this noise when I am driving - turning corners. Car is a 2007 Toyota Corolla LE (I miss my Beetle). The Toyota service says brakes are fine and they see nothing. I am not the only one that hears it... My son has hard it and I have startled some pedestrians.
View 1 RepliesLexus IS 2014+ :: Slight Binding / Grinding Feeling Or Faint Noise When Front Wheels Are At Full Lock
So I'm new to the all time awd car thing. I came from a 4x4 truck which 4x4 was never engaged on pavement or in tight cornering. When maneuvering my is250 awd in tight spots ie. parking lots and the front wheels are at full lock in either forward or reverse there is a slight binding/grinding feeling or faint noise. Is this normal on an awd car or Lexus specific??? Did a quick search and didn't find much about this issue. I'm pretty sure its not tire rub.....stock set up.
View 10 RepliesFord Super Duty (1999-2016) :: 2000 - Front Axle - Hub Makes A Slight Metallic Grinding Noise About 1/2 Way Around
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
Prius (2004-09) :: 2008 - Braking System Makes Slight Grinding Noise While Getting Below Around 10 Mph?
Just purchased a used 2008 prius with 80,000 miles on it. Braking system makes slight grinding noises when getting below around 10mph. I know the brakes are different, so I'm not sure if this is normal or if it means my brake pads need replacing? Car didn't come with an owners manual .
View 6 RepliesElantra XD (2001-06) :: 2004 - Transmission Making Slight Grinding Noise When Putting Into Reverse Only
No codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.
View 1 RepliesToyota - Sienna :: Grinding Noise From Front Driver Wheel
Had my wheel bearings replaced 3 weeks ago from a mechanic I never went to, as mine was on vacation. 3 days later tire fell off while driving. So we took it to my regular mechanic and had all safety issues fixed. New brakes, rotor, hub. But noticed that a grinding noise appeared. Took it back to mechanic, and he said that it was due to the spindle being slightly bent. Thst it wasnt a safety concerns, but will cause rotor/ brakes to wear out quicker.
I'd like to trust my mechanic, as he has always done good work for me in the past. But am a little shaky over every noise. I'd he correct?How soon should I get it repaired? I just dropped over $600 to get the can drivable again. So if I can push it off until I can afford it that would be great! Otherwise, I might need a small loan to repair.
Toyota - Camry :: 2005 - Grinding Noise That Appears To Come From Left Front Side
My 2005 Camry started to make a, for a better work, "grinding" noise that appears to come from the left front side. It seems to appear around 40mph. Other symptoms:- the noise is not present when the car is in park even when revving up the engine- the noise appears to be correlated to the car/wheel speed - if placing the shift in neutral, the noise does not change while the speed doesn't change- if starting in 2nd gear, the noise only appears around 40mph when the engine is about 4500rpm.
Here it is a little hard to distinguish as the engine masks it- if switching the the 3rd gear, the noise does not change- if switching to "D", the noise does not change- coasting at neutral at more than 40mph still gives out the noise- when going over higher spots in the road (when the load of the wheels is reduced) the noise intensity goes down
There is no (or very low) noise at low speeds. Also, no noise when taking sharp turns. Had both front wheel bearings changed and the break pads, and the noise did not go away. I will be taking the car to a transmission place soon.
Toyota - Corolla :: Thumping Noise From Right Front Side Below The Floor
Getting the car ready to drive 1500 miles cross country, I took the car to a mechanic for a check up. I asked him to pay particular attention to a thumping noise from the right front side below the floor every time the car goes over a small bump at low speeds. The car has 128 K miles. He tells me everything checked out fine except the attachment points of the sway bars are worn and that is the cause of the noise. He said that apart from the nuisance factor its not a safety issue and that I could leave it alone. Alternatively, replacing the bar/s would cost around $300. What is a sway bar and what does it do. I'm planning to trade this car in about a year from now. Till then it will be mostly used in city driving and commuting. It will be driven around 12K miles a year.
View 8 RepliesToyota - Corolla :: Noise In The Front Driver Side Wheel Well
I hit a curb in my 97 corolla now it's making a noise in the front driver side wheel well driving down the road, what it is?
View 6 RepliesToyota - Corolla :: Rattling Noise Coming From Under The Front Side
I've noticed a rattling noise coming from under the front of my 02 toyota corolla. I looked under the car and there seems to be a piece of metal under the front of the car thats vibrating and making the noise. The piece of metal is almost directly in the middle front of the car, in-between the front tires. The sound seems to be most prominent when I accelerating or backing up.
View 2 Replies