Ford F-150 (2004-2008) :: While Turning Makes Rubbing / Grinding Noise From Front?
I've got a new issue that is happening on the front end of my truck. Whenever I try turning my wheel while driving, I get this rubbing/grinding noise coming from the front of my truck. It only happens when the wheels are in motion. It seems to happen less when I'm driving at higher speeds, but I can notice it make the sound at any speed. I tried driving it slowly in an empty parking lot while turning and it's definitely making the sound every time the tires rotate.
I took it in for an alignment because this was happening every time I drove, whether it be driving straight or making a turn. Now that my alignment has been fixed, it no longer make this noise if I am driving in a straight line, so it only seems to happen when I'm turning. I had the mechanic check to see if they could reproduce the issue. The mechanic was able to hear what I hear, but when he put it on the lift at the shop, he was not able to reproduce the sound.
Toyota - Sienna :: 2008 - Slight Grinding Or Rubbing Sound When Braking
I have an 08 Toyota Sienna and yesterday I started to notice a very slight grinding or rubbing sound when I apply the brakes coming from the passenger side front wheel. I can only hear the grinding or rubbing sound when I am going very slowly (like the last 20 feet when approaching a stop sign). The sound pulses slightly like two surfaces that are not parallel are rubbing. There is no pulsation or wobble felt in the brake pedal. I'm thinking it's time to get the rotors turned, but it could also be the brake pads.
View 5 RepliesPrius (2004-09) :: Grinding Noise When Braking At Low Speed
Bought my Prius (2005, with 160K miles) about a month ago and since I've had it I am hearing a metal on metal grinding noise when braking at low speed. How loud the sound is depends on how hard I am on pushing on the brakes. One of my co-workers has the same model and said that his does not make that sound. Not sure if its just because it has after-market brake pads or something? This noise only occurs when braking at low speeds (below 10 MPH) so I assume its an issue with the front brakes.
Is this something I need to get looked at by the dealership? I had a local mechanic that worked on my old Honda beater take a look and he said that the rotors and brake pads looked new and wasn't sure why they'd make noise.
Prius (2004-09) :: 2007 - Grinding Noise When Braking
So my dealer diagnosed my 2007 Prius with a transaxle issue, but what bothers me is that it doesn't make the sound all the time. When I brake lightly, there is no sound and when I brake heavily there isn't either. It is only when I do a medium brake above 7 mph of course and around 20's mph range. I am hoping for something besides the transaxle...maybe a wheel bearing...anything.
View 19 RepliesFord Super Duty (1999-2016) :: 2000 - Front Axle - Hub Makes A Slight Metallic Grinding Noise About 1/2 Way Around
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
Prius (2004-09) :: Grinding Noise On Radio While Braking / Accelerate
I may be worrying over nothing but lately when I brake or accelerate I hear a grinding noise on my radio. I listen to AM. With my other vehicle it usually meant there was a problem somewhere.
View 1 RepliesPrius (2004-09) :: Inverter Generator Grinding Noise When Braking Above 7 Mph?
My car was making a weird grinding noise when braking above 7mph. I did the neutral brake thing and seems to go away sometimes. The dealership said it needed new rotors and brakes, so I went ahead and did that with them, then called me to let me know the sound did not go away. Now they are stating my grinding noise is coming from the "inverter generator" which is what they said was the transmission. I am just curious why this goes away sometimes and if it's related to my previous issues with the car.
View 1 RepliesPrius C :: A/C Not Working, Makes Grinding Noise When Turning On
Fearing the worse here on my 2011 Prius Four, not IV. When I press the "on" A/C button I hear a grinding noise for about two seconds. Seems to be coming from a low area in engine.
View 15 RepliesYaris/Scion & Vitz :: 2008 Toyota - Grinding Noise When Braking And ABS Light Is Off
I have a 2008 Toyota Yaris Hatchback with only 60,000 KMs.
I have been having a lot of problems with this cars ABS and brakes. For a few months now, the ABS Light and "!" will come on and off throughout my drive to work and home. Also, sometimes when I hit the brakes it makes a LOUD grinding noise and when I'm holding down the brakes the car doesn't stop as fast, it kind of like skids. Now, I've noticed that this noise only occurs when the ABS light is OFF. When the ABS light and brake light come on, NO noise what so ever.
I've gone to multiple mechanics and replaced almost everything you can name for brakes (pads, drum, rotor, etc.). I've also tried replacing the ABS sensor wires, but still I am experiencing the same problems. It's really frustrating because the noise only happens sometimes, and of course it never makes the noise when the mechanics in the car with me.
I've made a video of the noise it makes, you can check it out here ......
Prius (Gen 3) :: Metal Grinding Noise When Braking
I've read a few posts about the Prius braking system. Just wondering what other owners have done when they experience the metal grinding noise and when brakes need to be replaced. My car has around 67,000 miles. I was planning to take it to a Toyota dealer, although prefer to find a certified Prius or hybrid mechanic at an independent shop.
View 3 RepliesPrius (Gen 3) :: Hybrid System Makes Screeching Noise When Car Starts
Some part of the hybrid system makes a moderate to loud screeching noise when the car starts moving initially. It's gotten to the point where people are staring at me when I pull away in parking lots because it's so loud.
- Do the gen II cars also make this noise?
- Why don't the Lexus hybrids make this noise?
- Is there anything that can be done to lessen the noise?
Prius (Gen 3) :: 2010 - Grinding Noise When Regen Braking
The topic is as much as I can say to what my car's problem is.
2010 Prius II with 50k miles now.
Toyota - Corolla :: 2004 - Slight Grinding Noise From Front Right
I have an '04 Corolla with 206k with a slight grinding noise from the right front when I make a left turn. Is it the outer CV joint? The noise sounds like the tire is rubbing against a splash guard but it's not.
View 3 RepliesGTI 337/20th Anniversary :: Grinding Noise While Engine Braking On 2004 Jetta GLI V6
2004 Jetta GLI V6 24v 6 speed ... This started a few years ago, but it was happening in 3rd gear only -- therefore I avoided engine braking in 3rd gear all along. The noise was a pretty loud, noticeable grinding/spinning noise. 3rd gear while accelerating or maintaining gas worked and still works perfectly, smooth as can be.
Somewhat recently (6mo-1yr ago) all the other 5 gears started making this grinding noise, some more than others. 1st gear I don't really know because I don't engine brake in 1st. However, 2nd, 3rd, 4th, 5th and 6th (barely noticeable but still there) all make the noise. I now of course avoid all engine braking, however even the transitional steps between gears can be heard sometimes ... unless I perfectly match the RPM etc, but I'm just trying to get to work and back here ...
The car is still quite drivable, but with a major obstacle (pain in the ass) and a new clutch is probably around the corner -- I have 107K on it now. However ... a few years ago when it had 26K on it .. it didn't need a new clutch yet 3rd was still making that noise.
Prius (2004-09) :: Grinding Sound Like Grains Between Pad And Rotor While Braking
I purchased (2/17/16) a 2009 Toyota Prius with roughly 73,000 miles. I have recently (the past 4-5 days, except the brake issue that occurred a couple of weeks ago) encountered a number of issues. The issues occur intermittently.
First, while braking, usually when it's raining or damp outside, I might hear a grinding sound like grains between the pad & rotor. Or, the car will be gliding to a stop then at about the 4-6 mph range the brakes will grab and the car comes to a complete and abrupt stop.
Second, while idling in 'P' the engine will engage and the car will shift forward about an 1-2" then roll back (as if bucking). My foot is off the brake pedal. I have the sensation that the car is going to drive itself.
Elantra XD (2001-06) :: 2004 - Transmission Making Slight Grinding Noise When Putting Into Reverse Only
No codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.
View 1 RepliesPrius (2004-09) :: Code C1365 For ABS / Braking System
Its a 2009 with about 75K miles. Back last year my wife drove through some thick mud, and this caused brake failure....yellow exclamation mark, VSC, and red brake warn lights all on and the buzzer sounding. I did not have mini VCI/ techstream at the time, but I went to car wash and sprayed out the insides of wheels heavily, and then did the jumper trick while pumping brakes 8 times, and the faults cleared and brakes worked perfectly for some months--- until this weekend. We had very heavy rain again, and the tires were encased heavily in mud again. I figured it must be a wheel speed sensor signal problem again. So I took it to car wash to clean inside of wheels.
Now I have the mini-VCI /techstream running on a laptop to check it out. I ran the health check and it came back with code C1365 for the ABS/ braking system. I cleared all DTCs, and the fault lights cleared, but the brakes soon failed again with the same dash indications. Tried once more, same thing. Then I remembered about the trick last year of jumpering the diagnostic connector. This temporarily clears the fault, letting the brakes work fine, until the next time you start the car. Then it comes back. I clicked on that fault code in techstream, and noted that code C1365 was telling me that the accumulator press. sensor voltage was below threshold. Should been at least 4.7 volts, but it was at 4.37.
But the brakes work perfect as long as you don't shut it down! So how can a part really be bad? If it is indeed bad as the code says, is this sensor replaceable by itself, or does the whole accumulator have to be replaced? Is it a job a DIY mechanic can do? I am able to at least drive the car, although my wife can't. I just stick two pins in the diagnostic connector, and I connect them temporarily with a jumper to do the reset trick before each drive.
Lexus IS 2014+ :: Car Makes A Slight Thumping Noise When Brake
i drove my car for the first time in a few weeks and i noticed when i brake my car makes a slight thumping noise and has a slight vibration. i looked at my brakes and they look fine, they are brand new, less then 5k miles on them.
i thought it was maybe i haven't driven them a while and it was from a rust and dirt built up, but its not.
not sure what it might be, tried to record a video but it didn't come out all that great.
Camry :: 1995 - Makes Grinding Noise While Accelerating
My car just started making a grinding noise when accelerating. It does not make it while maintaining a constant speed or revving the engine in neutral. I never had this problem before and I am at a loss to explain it. Car is 1995 Camry for what that is worth.
View 4 Replies