Toyota - Corolla :: 2005 - Making Grinding Noise While Shifting?
Our 05 Corolla, 160,000 miles, has started making a grinding sound when we upshift into 3rd, unless we let the rpms fall to below 1000. My husband said the clutch needed adjusting, but the dealer said this clutch is not adjustable. The dealer found nothing wrong and could not get the car to make the noise while in the shop. (It did actually get better for a while but got worse again almost immediately after the visit to the dealer.)
Our other car (a Saturn) has over 250K miles on the original clutch, so I don't think it's our driving. What could be wrong, and is this something that needs to be addressed soon lest we damage something irreparably? Also, this car has, since purchase, been nearly impossible to shift on the coldest mornings. Really, sometimes it is all I can do to get the lever in reverse to back out of the drive in winter (in Kansas). Warming up works, but it seems to take an inordinate amount of time before shifting is"normal."
Toyota - Corolla :: 2004 - Slight Grinding Noise From Front Right
I have an '04 Corolla with 206k with a slight grinding noise from the right front when I make a left turn. Is it the outer CV joint? The noise sounds like the tire is rubbing against a splash guard but it's not.
View 3 RepliesToyota - Sienna :: Grinding Noise From Front Driver Wheel
Had my wheel bearings replaced 3 weeks ago from a mechanic I never went to, as mine was on vacation. 3 days later tire fell off while driving. So we took it to my regular mechanic and had all safety issues fixed. New brakes, rotor, hub. But noticed that a grinding noise appeared. Took it back to mechanic, and he said that it was due to the spindle being slightly bent. Thst it wasnt a safety concerns, but will cause rotor/ brakes to wear out quicker.
I'd like to trust my mechanic, as he has always done good work for me in the past. But am a little shaky over every noise. I'd he correct?How soon should I get it repaired? I just dropped over $600 to get the can drivable again. So if I can push it off until I can afford it that would be great! Otherwise, I might need a small loan to repair.
Corolla / Matrix 2009-13 :: Toyota Making A Loud Grinding Metallic Noise On Front Left Side
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 RepliesToyota - Corolla :: Noise In The Front Driver Side Wheel Well
I hit a curb in my 97 corolla now it's making a noise in the front driver side wheel well driving down the road, what it is?
View 6 RepliesToyota - Camry :: 2005 - Grinding Noise That Appears To Come From Left Front Side
My 2005 Camry started to make a, for a better work, "grinding" noise that appears to come from the left front side. It seems to appear around 40mph. Other symptoms:- the noise is not present when the car is in park even when revving up the engine- the noise appears to be correlated to the car/wheel speed - if placing the shift in neutral, the noise does not change while the speed doesn't change- if starting in 2nd gear, the noise only appears around 40mph when the engine is about 4500rpm.
Here it is a little hard to distinguish as the engine masks it- if switching the the 3rd gear, the noise does not change- if switching to "D", the noise does not change- coasting at neutral at more than 40mph still gives out the noise- when going over higher spots in the road (when the load of the wheels is reduced) the noise intensity goes down
There is no (or very low) noise at low speeds. Also, no noise when taking sharp turns. Had both front wheel bearings changed and the break pads, and the noise did not go away. I will be taking the car to a transmission place soon.
Toyota - Corolla :: Clamping Noise From The Driver Side Front Wheel Sometimes
My car is a 2000 Corolla CE I bought 2 months ago with 45k miles. It does not have ABS system.
Before I took the mechanic:When I brake, there would be a "clamping" noise from the drivers front wheel sometimes. It sounds like the caliper "clamping" noise. The brake cylinder would also click the first time (and maybe second) the pedal is pressed.
The mechanic replaced the both front calipers, put new brake pads, installed rear drums and shoes, and changed brake fluid.
The brake pedal is now high and when I brake....it does brake but it's not like "instant stopping power" like new brake pads. Is this normal? (maybe I have to break them in). Also, the master cylinder is still clicking (I pump the brakes since my car has no ABS)....it clicks the first 2 times I pump. Is that normal?
Edit:Since the repair, I drove it for the second time. This time the brakes brake more "instantly". The clicking of the master cylinder is still there however, could this be due to air in the hoses?
Toyota - Corolla :: Groaning And Creaking Noise Coming From Right Front Wheel Well
I have a 1991 Toyota Corolla Wagon (150,000 miles) with noise coming from right front wheel well. My car is making groaning and creaking noises like the hinges of an old wooden door. CV joints serviced <5000 miles and the boots are clean and intact. There is no clicking noises during a turn Left or Right. Bouncing the right front corner does not replicate the sounds, tho' there is some slight squeaking noise not heard from the shocks/struts in the other corners. The sound is NOT heard in the morning going to work, but is very noticeable driving home at 5pm. I notice the sound going downhill at 35 mph, but goes away with light braking, Going over railroad tracks does not affect the noises. I'm thinking this could be worn bushings, strut mounts or who knows what?
View 1 RepliesToyota - Corolla :: 2006 - Squeaky Noise From Passenger Side Front Wheel
I drive a 2006 Toyota Corolla, and I've noticed e a squeaky noise coming from my passenger side front wheel. The noise only occurs when I am accelerating the car and driving between 20-40 mph. As I accelerate, the squeaks increase in frequency. They disappear when I brake.
A mechanic replaced the front brake pads two years ago (15,000 miles ago) and also shaved the rotors. About a year later, the squeaks began. I brought the car into a different mechanic at that time (because I moved) and asked them to take a look. They checked the brakes and said they looked good. They attributed the noise to metallic brakes as opposed to ceramic and said the noise would go away in time. The noise has persisted, however, and is becoming more intense.
What is going wrong? Could this be a CV joint or wheel bearing issue? A rotor issue?
Toyota - Corolla :: Grinding Noise When Starting
My 2009 Toyota Corolla has started to make a grinding noise when starting. The sound is identical to when you try to start an idling car. What the problem is?
View 7 RepliesToyota - Corolla :: 2009 - Grinding Noise While Turning Right
I have 2009 corolla with 70000 miles on it. I replaced new brake pads. I have some metal grinding noise when i turn right only. I tried looking online and got few similar problem faced by other people. I am not sure if its exactly same issue. No accident damage. Mostly driven on freeway.
1) noise looks similar
2) I do not get noise when i accelerate
3) for car this old is it expected ?
Toyota -corolla :: 2014 - At Start Up Grinding Noise?
When I start my car (usually a cold start) I hear a TERRIBLE grinding-like noise. Other times it sounds like a shuffling noise. And then other times it's like its over-exerting itself trying to start up. I've taken it to the dealer many times as it's a 2014 Corolla. They have no answers. The claim it's just a characteristic of the car. I call bull. This isn't normal for any car. My car has a CVT transmission by the way. Could it be the starter? Spark plugs? Note: the noise is about 1000x worse in winter. Audio is attached in separate comment.
View 19 RepliesToyota - Corolla :: 1998 - Grinding Noise When Let Off The Gas And Engine Goes Down To Idle
I have a '98 5-Speed Corolla. If I rev the engine when the car is in neutral and warming up I hear an odd grinding noise when I let off the gas and the engine goes down to idle. The noise does not occur if I put my clutch in. Is this something to worry about?
Also, I'm wondering what CV joints sound like when they're failing.
Corolla / Matrix 2009-13 :: Unusual Rumble Or Grinding Sound Coming From Driver Side Front Wheel Well
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 RepliesToyota - Corolla :: 2008 - Engine Runs But Car Does Not / Loud Grinding Noise
I was driving my car today, and I stopped at a stop sign. When I went to go, I pushed the gas, and my car revved up, moved forward, then all of a sudden it made a loud grinding noise (Like I was dragging metal sheets), and the gas stopped responding (but the engine was still running). The car still turns on, but whenever the gas is pushed, it doesn't go and makes that awful noise. What could be wrong?
View 2 RepliesCamry :: 2005 XLE - Grinding / Thumping Sound From Front Passenger Wheel
I have a 2005 Camry XLE. Since past few months I have started hearing a strange grinding / thumping noise from the front passenger side wheel. It can be clearly heard at slow speed and almost sounds like the wheel is lopsided and is rubbing against something. As the car picks up speed, the frequency picks up and the sounds disappears eventually.
So, I figured it must have been because the car had hit a curb few months ago and must have bent the rim. I had the wheels looked at while getting rotation and balancing done and was told that there is no rim damage. The sound went down a little after rotating the wheels but is still there. The mechanic doesn't think that it is the bearing because the sound disappears after moderate speeds. So, trying to figure out what could be causing the noise?
Toyota - Corolla :: Metal Grinding Noise - New Pads Resurfacing When Replacing Rotors?
I replaced my pads 3 months ago. Now I have a metal grinding sound (not squeaking). The mechanic says I need new rotors, and he will resurface the pads. I know I can replace the rotors myself; but do I need to resurface the 3 months old pads? If so; how will they resurface them?
View 4 RepliesToyota - Corolla :: 2007 - Metallic Grinding Noise When Turning Into A Parking Spot
My car has been doing this more. When I turn into a parking spot or my works' parking garage my car front end makes a Metal Grinding noise But it does not make this noise when I am driving - turning corners. Car is a 2007 Toyota Corolla LE (I miss my Beetle). The Toyota service says brakes are fine and they see nothing. I am not the only one that hears it... My son has hard it and I have startled some pedestrians.
View 1 RepliesFord Excursion :: Pop Noise In Front End / Left Front Wheel Grinding
Driving at hwy speeds and head a pop noise in front end. Stopped and couldn't find anything, heard it a couple of more times, still nothing found, now I have a grinding noise left front wheel. What the issue may be. 2001 Ford EX 4X4.
View 6 Replies