Suburban :: 93 No Fan In Front / Back Cold Too - Heat Only When Moving
I have a '93 Suburban, Its actually in great shape, except that the fan made some loud whining noises for about 45 minutes and doesnt work at all now. I have heat, but only when Im driving on the highway and only when the heat is actually turned to the "off" postion on the switch and I dont even have heat when slowly driving around town. The rear fan works, but blows cold too. Im not sure that even gets hot when Im moving, as I feel a cold breeze on my neck when I turn on the fan when Im driving. I dont think the ac works at all...just bought this truck, so havent tried it, and its cold out anyway, so I'll have to wait I suppose.
View 6 RepliesSuburban :: 98 - Fluid Running Off Lower Hose
Pressure tested the system and found fluid running off lower hose where it connects to the water pump. I'm guessing replacement is a difficult job.
View 2 RepliesAccent MC (2006-11) :: Radiator Hose Replacement?
There were some minor coolant leakage from the upper hose radiator so I have it replaced. Took me 2 hours because the thermostat housing hose neck gunk up with white lime.
Everything works fine but the car still suffering from minor coolant lost. Found some water stain over the bypass hose neck so I get it replaced too. Took me another 2 hours to get it fix because of the white gunk buildup. Secured everything including the hose and the clamps. Minor water stain still can be found at the bypass hose neck.
Replacing the radiator hose? Does it takes few days for the new radiator hose to fit 100%?
Suburban :: 1996 - Washer Fluid Pump Replacement
I know I need to remove the reservoir to replace the pump but I can't get it out. I removed the storage compartment, then the bolt connecting the translucent top portion of the reservoir that connects to the front and the side bolt that connects the reservoir to the side of the truck. It is loose but I still cannot get the reservoir out.
View 1 RepliesFord Escape / Hybrid :: Rubber Brake Hose Replacement?
Removing the old cracked rubber brake line hoses on my daughters 2003 Ford Escape. Front left no problem. Old off, new on in 5 minutes. All the other won't come free. Can break nut loose, but just spins & spins. What is going on here? Did search and should be very easy.
View 6 RepliesFord 6.0L Power Stroke Diesel :: EGR Cooler Hose Replacement
My orange one leaks, bought a blue one. How the heck to I install it? I have decent tools.
I reviewed the threads on coolant flush and fill, and bought a coolant filter kit, I will be doing that at the same time.
Suburban :: 99 - Engine Turns Over But Doesn't Start After Fuel Pump Replacement
Just replaced the fuel pump in my 99 Suburban. Replacement is an AC Delco unit. When I tried to start it, nothing. Engine turns over but doesn't start. Checked all connections and getting voltage down to new harness. replaced relay from GM dealership and also fuel filter. I used to hear the old pump prime when turning on the ignition but don't hear anything with the new pump. Could it be a bad pump out of the box?
View 1 RepliesFord - Windstar :: Shaking And Engine Light After Replacement Of Pressure Hose?
we just replaced a pressure hose that broke and now the engine light blinks 30 times and then goes off and then blinks again plus the engine seems to be shaking allot.
View 1 RepliesAccord :: 2005 V6 - High Pressure Power Steering Hose Removal / Replacement
How to remove the "high pressure" power steering hose. I have drained the fluid, disconnected from the pump, and also from the rack. Removed the center clamp, and got it all "loose". However, I cannot seem to figure out how to "fish" the hose out. There is a long piece of metal tubing that connects into the rack, and it seems to be resting above some cross member that is not removable. Went to the library, and searched the AllData Online manuals. On the "How to replace the High Pressure Hose" page, it only showed a diagram of the power steering system, with no written description on how to remove the hose. I am not on a lift, but jacked up and supported and on my back under the car with the right wheel removed. I am stumped, and the new hose is due to arrive soon.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Lower Radiator Hose Replacement
I'm going to be replacing my lower radiator hose so figured might as well switch over to the extended life stuff going to probably go with the Delo ELC.. Supposedly it's good for 750k.
View 14 RepliesFord 6.0L Power Stroke Diesel :: Coolant Leak - EGR Delete Hose Replacement
Had a coolant leak I finally traced to the rubber hose on an egr delete (previous owner installed, not sure of brand). Looks like the jackwagon who installed it cranked the clamps way too tight and they eventually split the hose. I have a piece of heater hose that looks like the right diameter and cut to size should fit fine. I guess I am just looking for some reassurance that it would be ok to use in that situation...
View 3 RepliesFord Super Duty (1999-2016) :: Leak At Heater Hose Assembly - Replacement?
Today I noticed a leak at the heater hose assembly at the right rear of the engine compartment. It appears to have special connectors and that appears to be where the leak is coming from.
View 1 RepliesFord Transmission :: 2001 F150 - Location Of Replacement Pressure Hose For Power Steering
2001 F150 Supercrew 5.4L ... Dealership unable to locate replacement pressure hose for power steering . I've returned 3 wrong parts. The hose in pic goes all the way up to the reservoir.
View 13 RepliesChevrolet - Suburban :: 2005 - Won't Start When Cold?
I have an '05 Suburban with starting issues. When it's cold out (below 40 degrees) and you turn the key, all accessories come on but truck will not crank. It then seems like the power just cuts off.......dash lights go out but gauges are fixed in place and a couple of seconds later, I hear a strange buzzing noise from the dash area behind the radio and the gauges will then go to power off position. Then if I try to start it, there is nothing, no lights on dash, no starter engaging, no clicking of the relays, nothing. I tried, on a hunch to disconnect the ground lead from the battery. Had it off for 10 minutes or so, put the cable back on, tightened it down (wasn't loose to begin with) and it started right up first try in 20 degree weather. I had previously had the battery and alt checked and both were good.
View 3 RepliesSuburban :: 1999 - AC Running Too Cold And Freezing Up The Evaporator
So here's the deal...my '99 Sub has developed the problem of the A/C running too cold and freezing up the evaporator.The specs call for the clutch cycle switch to shut off the compressor at 25 lbs-low side, and turn it back on at 45 lbs. With a static pressure of 120 lbs, ambient air temp of 85 degrees, engine idle 1200 RPM: when the system is turned on the compressor activates and the low side pressure stabilizes at around 30-34 lbs...the high side sits at around 180-200 lbs...fan on high, max setting on temp control, the middle-front register reads 28-36 degrees.
This is great for awhile until the evap freezes up and airflow is restricted. The lowside pressure will not drop down to 25 lbs to activate the switch to shut off the compressor. I even installed a new pressure cycle switch to no avail since the pressure will not drop enough to activate it anyway. So every half hour or so, I have to manually shut off the compressor at the control panel for about 5 minutes, and then start the process over again. The rear unit is controlled by the TXV and continues to function just fine (rear register temp 36-40 degrees).
Chevrolet - Suburban :: Cold Air Blown For About 15 Minutes Then Turns Hot
My 04 Chevy suburban blows cold for about 15 minutes then turns hot...sometimes it will turn back cold, but not lately
View 2 RepliesFord - Explorer :: Rear AC Suction Hose Not Cold
Rear ac suction hose not cold, need diagnosing...
View 4 RepliesSuburban :: 1999 - When Press AC Button / Indicator Light Comes On But No Cold Air
Another problem just came up with my 1999 1500 suburban. When I press the AC button, the indicator light comes on, but no cold air.
I am searching for some schematics at the moment and thought I'd drop a post here for some expert advice.
I realized that the ac clutch does not engage at all when the button is pressed. Does this mean low refrigerant, bad relay or switches?
It all worked a few months ago, before I started fixing the random engine misfire problem. But I did not touch the AC components back then.
Also, read some info on using a scanner to find info on AC request. However, not sure if this scanner (MD9000) has that ability (it's a friend's).
Golf IV / Jetta IV :: After Installation Of Cold Air Intake Where To Put Breather Hose
After installing my cai, I couldn't find where to put this breather hose, I'm lost to if I need it and where to put it...
View 2 Replies