Passat (B5) :: 2002 GLX - ABS / Brake Light Is Off
I bought a 2002 passat glx auto with the abs/brake light malfunction. So I replaced the abs module with a part from a 2001 passat 1.8t manual, the numbers matched exactly. The abs/brake light is off, my question is that since mine is an automatic and the part was from a manual, do I need to recode the abs if the lights are not on?
View 2 RepliesWindstar :: 2002 - After Driving A While ABS And Brake Light Come On
mY 2002 Windstar abs & brake lights come on after driving a while. would it be ABS module?
View 10 RepliesCamry :: 2002 XLE - No ABS And Brake Light When Switch Ignition Key On
Camry 2002 XLE 4Cyl. 2.4 ... When I switch ignition key on, there are no ABS and Brake light come on. Why is that happening? How to fix it? Normally, when we switch ignition key on, what are indicator light on?
View 6 RepliesGolf IV / Jetta IV :: 2002 VR6 - EPC Light On And No Brake Lights
So yesterday on my way to work the EPC light came on. Everything seemed fine. No loss of power or check engine light. Just an EPC light on the dash. So after searching around and checking the forums I decided to step outside and check the codes. I have a bluetooth OBD2 deal that talks to my phone and I have software on my phone to read and clear codes and other things. I checked but no codes. So I decided to do the clear codes function and it made the EPC light go off. On my way to grab some lunch the EPC light came back on and I noticed my cruise control would not work. Did some more research and figured it must be the brake light switch.
Went and bought one for 15 bucks and installed it. Cleared the light again with my phone and headed home. On my way home the EPC light comes back on. Once I get home I check and find my brake lights dont work at all. I checked the switch and it is functioning properly. I could even unplug the brake light switch and jump the red/brown power wire to the red/black wire and they still wouldn't light up. No power getting back to the lights. This morning I get up and head to work. No more EPC light and my brake lights are working fine. I'm thinking maybe a short in that red/black wire but I just don't know. Does that wire go straight from the brake light switch to the brake lights or does it go through any modules or connectors or anything? I would love to get a schematic of the Brake light wiring. 2002 GTI VR6.
Dodge - Dakota :: 2002 - Brake Warning And ABS Light On
I was asked to look at this Dakota because the Brake warning light and the ABS lights come on.
I get no stored codes with my code reader, and upon test driving it I found that the lights both go off when you shut off the truck, but each time you start up and drive off....those two lights will come on the first time you hit about 30mph and then stay on until you shut off the truck again. Restart and the lights are off until you drive off and hit about 30mph again.
Backing out of the shop, stopping, turning around, down the driveway 50yds and stopping at the road....the lights stay off, even though I just used the brakes three times at least. Get on the road and hit 30mph and they go on.
The two fuses, one in the fuse block by the drivers door and the other (ABS) fuse in the Power distribution box test good.Both brake lights work at the rear as does the high mount brake light. Fluid is at the full mark.
I pulled all four wheels and drums on the back and inspected everything and everything looks good and the E brake cables are intact and working as they should. Brakes were replaced (not by me) and have a little wear, but plenty of material left. No leaks of any lines, calipers, or cylinders. Front rotors are not scored from a sticky caliper, they do have a little minor rusting but because it has been idle for a few months.
I have the same year and drive train in my Dakota. Their truck has about the same stopping power as mine, but I did notice that I did not feel the surging in the ABS as I feel in my truck. I tested this by traveling at about 40mph with the passenger wheels in the gravel and drivers wheels on the pavement and applied the brakes hard. In my truck I felt the surging, but not in theirs. Note that my truck has a tall cap and always carries an extra 800 pounds of gear in the back.Maybe the heavier weight makes my ABS kick in quicker, but I would think weight wouldn't matter.....one wheel is slipping...period.
Volvo - S60 :: 2002 - Passenger Side Brake Light Not Working
We had the passenger side brake light not working in our 2002 S60. I moved the little silver tab at the socket w/ a screwdriver and it worked, but then hit the plate and both brake lights went out. Checked fuse, bulbs and swapped relay and shunt w/ out any luck. I hear a click at the relay when we use the brakes-am I missing something? Also, did the same w/ taillights and it blew a fuse, replaced and then they worked.
View 1 RepliesCamry :: 2002 - High Mount Brake Light On Spoiler Half Burnt Out
Just bought an 02' camry and the high mount brake light on the spoiler is half burnt out. Tried removing what I'm guessing is an LED assembly but the screws are stuck and the angle is really awkward. Am I going to have to replace the whole LED bar?
View 2 RepliesChevrolet - Malibu :: 2002 - ABS Light On / Brake Pedal And Steering Wheel Shakes
When I have to push on the brakes for a hard stop, I can feel the brake pedal and the steering wheel shake a whole lot. Also, he ABS light is on. Correlation between the 2 obviously?
View 10 RepliesFord F-150 - 1997-2003 :: 2002 - Brake Light On After Changing Master Cylinder?
ll, I changed out the master cylinder on my 2002 F-150, disk brakes front and back w/ ABS. Bleed all the air out and bench bleed the master cylinder. I have good pedal but the brake light will not go out.
View 6 RepliesFord F-150 - 1997-2003 :: 2002 - Brake Light Started Flashing After Start Up?
The brake lights on my '02 F150 have started flashing spontaneously ie - with no one in truck. This lasts for a few minutes, then stops, but can start again a few minutes later. The fear of course is that someday lights could come on and stay on, resulting in dead battery.
I do have a trailer brake controller that has been on truck ten years. Read something on internet that brake pedal switch might be going bad (??). Any one else observed this strange behavior?
Passat (B5) :: 2002 - Rear Light Bulb On Passenger Side Not Illuminate When Press The Brake
I am trying to replace the rear light bulb (top of two) on the passenger side. It doesn't illuminate when I press the brake. What kind of light bulb does it take?? There is a removable compartment but I am having a hard time removing the harness where the bulbs are located . I see two clips but I still can not pull it out to access the defective bulb.
View 1 RepliesFord - Taurus :: 2002 - Brake Warning Light Is On - ABS / Traction Control System Not Working?
I have 2002 Ford Taurus SES. Currently the brake light is on and the ABS and traction control are not working. The brakes have been checked and are ok and it has been hooked up to a code reader and no codes come up. Occasionally the light will go off and the abs and traction control work for awhile.
View 1 RepliesPrius (Gen 1) :: 2002 Brake Pedal Little Harder To Push - Lubricating Lever?
Recently the brake pedal on my 2002 Prius has been a little harder to push for the first mm of travel it almost "sticks" requiring slightly more effort once it moves past that point it is normal no fading or extra effort required this problem has now progressed to the point where the pedal is kind of crunchy for the first 5mm of travel and occasionally will not return right away causing the brakes to drag a little but again pressure required to stop is exactly the same no fading etc
I am thinking since I live on 2 miles of dusty washboard dirt road and some grit has worked its way into the bushing .
Prius (2004-09) :: 2006 - At Start Up Master Warning Light / Brake Light Comes On
We recently purchased a used 2006 Prius. The vehicle has approximately 74K on it now. Well the other day my wife went to leave work and pressed the power button while pressing the brake pedal, and the Master Warning Light and brake warning light both came on. The car would not allow her to shift the car so she tried to turn it off and it wouldn't do that either. After about 5 minutes she finally got the car to turn off, and when she restarted the sequence everything went back to normal and she drove home fine.
We called 2 dealers and they both seem to be confused by the symptoms, but one thought that maybe the battery was old on the transmitter. So thinking that might make sense I replaced the battery with a new one.
Prius (Gen 2) :: 2005 Brake Light Dim - Light Assembly Or Electrical?
my 70K mile 2005 passenger side brake light is sporadically dim (5 or 6 of the LEDs light up dim) and occasionally (but rarely) is fully bright. The driver side brake light and all of the other lights work fine.
Does this sound like I need to replace the whole assembly or have the electrical connections and voltage checked?
Also, I assume that the tail light assembly removal instructions that are posted for the 2007 are the same as for the 2005.
Ford Super Duty (1999-2016) :: 2002 F250 - Parking Brake Light Doesn't Come On
Parking brake light stays doesn't come on when the parking brake is engaged. The light DOES come on when starting the vehicle and the gauge cluster cycles through its start up procedure. Couldn't find a fuse that would fix my issue...does one exist?
Truck is an '02 F250 w/ 7.3TD and 6 speed manual.
Ford Super Duty (1999-2016) :: 2002 F350 - Park Brake Light And Chime Came On
My 2002 f350 diesel recently started acting up, the first sign was when my park brake light came on and the chime came on. I mucked around with a few things but still wont go away, while I was doing this a buddy noticed i had no brake lights at all and under further inspection no signals either, not even the clicking noise you usually hear also the cruise control has stopped working as well as the little screen mounted to the roof near the rear view mirror. I am fairly clueless with electrics (I don't even own a multi meter) but i do want to figure this out, i have noticed that fuse 20 was burnt and after replacing it it pops pretty much right when i push my foot on the breaks or signal.
View 10 RepliesSubaru - Outback :: 2002 - Rear Right Brake Light Housing Cracked And Filled Up With Water Shorting The Bulbs
I have a 2002 Subaru Outback. The rear right brake light housing cracked, and filled up with water, shorting the bulbs. I thought I was clever in taking the light unit off, draining the water, changing the bulbs, and caulking the crack with silicon. This worked for a while, then the battery died. I couldn't really figure out why - it was a year old, and had no prior issues starting the car. I swapped out the battery for a brand new one, and that seemed to solve the issue for a week. Then the car refused to start all over again. I remembered the brake light, checked it - filled again. So I replaced the unit and the pig electric line, and charge the battery. This seemed to solve the problem, but then the car failed to start after about 3 weeks.
One additional detail is the dial light switch on the driving shaft. One is able to turn this to adjust light settings. Regardless of position, the lights turn off when I turn off the car. However, failure to start seems to be additionally related to the position of this switch; if it's switched all the way back towards the driver the car appears to start consistently for weeks on end, BUT the tail lights fail to turn on in this position (though the brake lights work). Alternatively, dialing the switch all the way away from the driver turns on the tail lights, but seems to be related to battery drain.
I've checked the health of the battery and the contacts - everything checks out. At this point I'm wondering if it's an electrical fault or the alternator.
Ford Super Duty (1999-2016) :: 2002 F250 - Turn Signal Malfunction Caused By Brake Light Circuit
I'm having a turn signal issue with my '02 F-250 that started this morning out of the blue. Seems that when the signal switch is set for a right hand turn and the brakes are applied, the signal will then become solid, not flash, and then blow the fuse. Evidently something with the brake light circuit is overloading the turn signal circuit and not canceling when the turn signal is activated.
Here are a couple of things I have tried to narrow down the culprit.
1) Left turn signal works fine regardless if the brake lights are operating.
2) Brake light circuit operates fine by itself.
3) Right turn signal works fine but there seems to be a back-feed of power causing the center third brake light as well as the left side rear brake light to flash in unison. If brake lights are then activated, the flash stops and becomes constant thus blowing the fuse.
4) Emergency Hazard lights work perfect but the center third brake light again flashes as well which reverts back to some type of back-feed of power. Also, if brake lights come on, flashing turns to constant light and then blows the fuse again.
I guess my question is,. does this seem like the multi-function switch needs replacing or could this be a relay issue of some sort? I don' think its a ground issue simply because the left turn signal circuit as well as the center brake light circuit are both being breached when the right turn signal is activated. Your thoughts?
2002 F-250 Super Duty 5.4 V8