Malibu - Chevrolet :: 2007 - Cruise Control Stopped Working - Light On The Steering Wheel Comes On
I just recently started having trouble with the cruise control on my 2007 Chevy Malibu.
Last weekend, I went on an 800 mile trip (cruising most of the time) but stopped to have the tires rotated and balanced, and my oil changed halfway through (I was up for an oil change anyway). Got home late Monday, everything was fine. Then Thursday, my cruise control stopped working. The light on the steering wheel comes on to show that it is engaged, but I cannot set the speed.
The owners manual suggested it might be caused by low brake fluid. Checked that, saw it was a little low, maybe a centimeter, and filled it, but the cruise control still doesn't work. Thought maybe it was a fuse, but there wasn't a bad one.
I've seen some talk about it possibly linked to break or a transmission issue. For a few weeks, my Malibu has been making a lawnmower-ish sound when I drive 40 mph or faster. The problem persists whether its in manual or automatic. I didn't notice anything until I got my car back after loaning it to my parents for a weekend.
I bought the car used July 2010 from its first owner with about 37,000 miles. It's about 72,000 now.
Malibu - Chevrolet :: 2001 - The Brake Pedal Would Drop To The Floor While Driving
I bought a 2001 chevy malibu about a month and a half ago.when I test drove it,didnt notice any problems or leaks...after driving it for a 2 weeks...the brake pedal would drop to the floor while driving and then if I hit it again real quick it would be ok...this problem would happen now and then....we replaced the right front caliper thinking that it was sticking and bled all the brakes..There was air in the system..everything was fine for about two more weeks then while driving the pedal would get hard when applied and then drop again..not all the way to the floor,and it alternates that way..what are your thoughts? I don't have much money to fix this problem.
View 14 RepliesChevrolet - Corvette :: Steering Wheel Shakes And Vibrates
1981 Corvette rebuilt/restored. 35+ mph. steering wheel shakes/vibrates. Higher speed, depress clutch, smooth ride. Taken to mechanic recently, test driven to acknowledge, lift done twice, no clue.
View 5 RepliesChevrolet - Malibu :: High Pitched Noise When Turning Steering Wheel Right And Left
What do I need to do about the high pitched noise I hear when turning the steering wheel right or left?
View 2 RepliesGolf IV R32 :: Steering Wheel Shakes Lightly Left And Right When Brake Hardly
So about a day ago I finished installing my new rotors and pads.. I thought my vibrations are gone.. But I took it for a ride today.. When i brake really hard my steering wheel shakes lightly left and right.. Also when turning right there is a sound coming from the drivers side like the rotor is scraping against something or the rotor shield..? I installed the retainer spring and the first night when i took it for a ride everything was perfect.. Today its making that noise and the steering wheel as well as the vibration..
View 24 RepliesFord Excursion :: 2002 - Steering Wheel Shakes When Braking
My question is I have a 2002 Excursion 5.4 2wd with 126K on it, I have been chasing a shaking steering wheel while braking at higher speeds 50 mph and up, it is stronger at higher speeds and gets weaker and eventually goes away when slowing under 45ish mph. The shake in the wheel does not pull the truck at all, you can let go and it still stops straight. I have aligned and balanced I know its right I did it myself. I have also replaced steering dampener, and have done a full brake job on the front all new parts everything. Also the steering linkage is tight no slop or play in it.
View 14 RepliesChevrolet - Cobalt :: 2005 - Noise And Vibration In Steering Wheel And Gas Pedal
This started several months ago. I can feel it in steering wheel & gas pedal. I thought it was the tires so I put 2 new tires on front, but no change.Tires had no unusual wear. Happens at any speed, worse around curves, left or right. Worse when temp is colder, 55 degrees, better at 75 degrees. Not affected by braking or in coasting neutral. No problem with steering or pulling.
View 2 RepliesToyota - 4runner :: Steering Wheel Turns A Little Bit When Pedal The Brake
I have my Toyota 2000 4 Runners having a slightly problem. When I paddle the brake at the Stop or traffic light, the wheel turns (mostly anti-clockwise) a little bit like 10 to 20 degrees. It doesn't turn all the time but especailly when the car is going slightly downhill such as when I paddle the brake and stop from parking lot onto the main road. The road is a little dip down or sometimes in front of the traffic light and it was slightly inclined. I don't know if this normal or not.
View 7 RepliesChevrolet - Malibu :: 1999 - No Acceleration When Step On Gas Pedal
Started having problems with my Chevy Malibu (1999, with 95,000 miles on it) while driving two times this week. Both times an alert warning flashed on my dashboard. The first time, flashed the brake check and ABS warning on the left side of the dashboard, and the second time the check oil and check battery warning on the right side. In both cases, after the warnings flashed, the car was still running, but stepping on the gas pedal resulted in no acceleration, but brakes still worked. The steering wheel also locks-up to the point where I can't turn any more. Both times, I stopped and shut off the engine, waited about 30 seconds and restarted, after which everything is fine and normal. The brake pads were changed recently, but not the rotors which may not be in very good shape.
I took the car to garage and found the belt is good, but I have replaced both the alternator and battery, and also changed the brake pads. Car ran fine for a day. Yesterday while driving, had another issue of the accelerator not working while in the middle of driving. Was going up a small hill, tried to accelerate, but stepping on the accelerator didn't do anything. A few seconds later, I could not press down on the pedal anymore (as if the car was off). Brakes worked, I could turn, and no warning lights. Turned off ignition, restarted the car, and everything was fine. Same problem with the accelerator as I first reported, but no problem with charging or turning the wheel, and no warning lights since the alternator and battery are new.
Malibu - Chevrolet :: 1975 - Gas Pedal Slipped Off When Stepped On
My gas pedal wont work at all on my 1975 chevy malibu it feels like something slipped off when I stepped on it this morning....
View 2 RepliesChevrolet - Malibu :: Muffled And Gas Pedal Slow To React
I bought new 2009 maibu, changed oil every 3000, never had problem with car. Just thought because I have200k miles would be good to clean heads, had dealer put ina BG product. About 2 weeks after that the car see muffled and the gas peddle is slow to react,. Now six months later I am starting to smell gas. My guess catalytic converter.
View 5 RepliesLexus GX 2004-09 :: Shaking Steering Wheel And Pulsing Brake Pedal At Speeds Above 55mph
I bought 09 GX-470 4K miles ago..has 50K on it. Ran perfect when we bought it. wife said it started doing it 1 week later. I drove it and felt like warped rotors to me. replaced front rotors and pads with cheap wearever brand...I Know...I was sort of trouble shooting..did nothing ...did the back rotors and pads and seemed to fix it..did proper bed-in of new parts but, never checked at speeds above 55mph. recent trip got us up to speeds above 55... at these faster speeds when brakes are applied we get a nasty wheel wobble and a pulsing pedal...braking below 55 it feels fine.. thought's ?? last car was a 4runner which has the the same rotors and pads and never had a problem...could it be ABS ?? should I go with new oem rotors and pads ?
View 10 RepliesDodge - Dakota :: Pulsation In Brake Pedal And Sort Of Wobbly Feeling In Steering Wheel
I had a front brake job done on a 2002 Dodge Dakota pickup at 85000 miles. When I stepped on the brake, I felt pulsation in the pedal and a sort of wobbly feeling in the steering wheel. Also the brakes were making noises while driving. Classical sign of a warped rotor?! Long story short brand new rotors, brake pads and calipers, later the pulsation is mostly gone but the braking is still not smooth at one point while the tires are turning. Now i do have to older tires on the front but i just bought two brand new tires for the rear. Would it be wise to put the new tires on front to see if there might be some unevenness caused by the old tires before i take it back to the shop?
Also the feeling of the brakes catching on one point seems non existent or so minimal I can not be sure if the road surface interfering while driving slow of applying the brakes gently. But slowing down from higher speeds (above 40 mph) and using more then gentle braking ( not standing on the pedal with both feet) it is definitely there. Before the brake job braking caused the steering turning right. (sign of more braking action on the right - right?). Now with new stuff still pulls to the right but not as strongly. Should not this disappear with the brake job? Or get the new tires on front and see what gives?
Ford 6.0L Power Stroke Diesel :: 2004 - Steering Wheel Won't Turn With Brake Pedal Down?
I have an 04 6.0 psd and if I am stopped in drive with the brake pedal down I can't turn my steering wheel at all. If the truck is in park and my foot off the brake pedal I can turn the steering wheel both ways just fine. When I am driving I don't have any problems with the steering. I have checked the power steering fluid and it is full. This makes it kind of hard when I am trying to pull in and out of parking spots. What could be causing this and what the solution would be to fix it?
View 10 RepliesChevrolet - Malibu :: Loud Grinding Noise In Reverse When Gas Pedal Pressed
I have a 2005 Chevy Malibu, automatic transmission. When I put it in reverse and then press the gas pedal, I get a rather loud grinding noise for a couple of seconds. What is causing this, and is it doing any real damage? I have no other problems with the transmission.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Whine From Steering Wheel When Turning / Brake Pedal Is Mushy
2001 F350 XL... Fitting on PS pump broke and I lost PS and PB with fluid everywhere. Replaced the hose with a new one from Autozone and I have no noticeable leaks.
I know I lost more than a quart but I could only add less than a quart (Mobil 1 Synthetic ATF). I'm also getting a whine from the steering wheel when I turn stop to stop. The power steering is back and there are no leaks (that I see) but the brake pedal is mushy. I've pumped and turned stop to stop for a while. Do I have to bleed the system like I'm doing a fluid flush? I hate to waste the synthetic fluid that I changed about two years ago.
Chevrolet - Malibu :: 2002 Got Hot And Now Won't Start
I have an '02 malibu that got hot and now won't start I have pulled the plugs and there isn't any water in the cyliders. And none in the oil, what to check next?
View 6 RepliesMalibu - Chevrolet :: Clunking Noise - Steering Failure
After a little less than a week of clunking noises the steering on my daughters 2004 Malibu completely failed. The steering wheel moves the steering column, but not the tires. NHTSA has done 2 investigations and issued 8 TSB's on the steering system, but no recall. My question is if there is a way to determine if it is the rack and pinion system or the power steering control module. It seems many people have replaced multiple components on their cars without resolving steering problems. I am hoping to avoid that...
View 2 RepliesChevrolet - Malibu :: Stuck Steering Knuckle Bolt
I'm trying to replace the CV axle on my wife's 2006 Chevy Malibu, and the project is frozen in its track by a seized bolt.
Specifically, the top bolt of the two bolts that hold the steering knuckle to the strut. I got the nuts off the other end of each bolt with a breaker bar no problem. I set a jack under the steering knuckle and raised it a bit to relieve any load on the bolts, and with some PB blaster and a hammer, I got the bottom bolt out.
But this top bolt just will not budge. I've drenched the thing in PB and pounded the living hell out of it all to no avail. I don't have any socket that will fit the bolt head and besides, it's not really threaded in there. I don't have an air compressor or impact tools. The only thing I can think to do now is to get a torch and try to heat up the metal around the bolt head to maybe loosen it up some.
One way or the other the bolt has to come out now because I've mushroomed the other end of it with the hammer and a nut won't go back on it.