Phaeton :: Error Message - Move Selector Lever To Position P/N
I am Having a problem on my 2005 Phaeton which has a 3.2 engine. Last time I drove it was yesterday and had no problems. This morning, I'd turn the key and it give me various error message."Move selector lever to position P/N" ...
I tried to move it but with no luck , the message is still there and I also noticed that the light on the shift that indicates that I need to press on the break to start is not glowing. This is not the 1st time I had this error but before I had to leave it for a while and it will start ...
I really love my Phaeton and it has only 75,774 kilometres on , so it is quite new ...
You can see the error message and the light indication below in the pictures ....
Phaeton :: Move Selector Lever To Position P Message On Dash Display
Today when I head home I was getting the message "Move Selector Lever to Position P." It would come and go. No other lights or warning what so ever were lit. What this message was for and why it was displaying??
View 6 RepliesPhaeton :: Transmission Shift Lever Stuck In Park - Key Will Not Come Out Of Ignition
I searched for a prior post on this without success. I have a serious problem with my '04 V-8 transmission shift lever being stuck in Park in cooler weather. Ny wife is the primary driver, and on some cooler mornings it is almost impossible for her to move the shift lever out of park. She has to let the car warm up a bit, and then move the lever around a bit with all her might before it will finally move out of park. The dealer can't figure out what is wrong. It only appens when the temperature is below about 50 degrees, and with winter approaching, frequent problems lie ahead.
View 24 RepliesPhaeton :: Transmission Shift Lever Stuck In Park - Key Not Coming Out Of Ignition?
I searched for a prior post on this without success. I have a serious problem with my '04 V-8 transmission shift lever being stuck in Park in cooler weather. Ny wife is the primary driver, and on some cooler mornings it is almost impossible for her to move the shift lever out of park. She has to let the car warm up a bit, and then move the lever around a bit with all her might before it will finally move out of park. The dealer can't figure out what is wrong. It only appens when the temperature is below about 50 degrees, and with winter approaching, frequent problems lie ahead.
View 24 RepliesElantra MD (2010-15) :: Shift Lever Unable To Move From P And D Position
I have 2013 elentra just about a year old, (Took delivery june/2012). Recently some thing happen on the Shift lever, can't shift to "R" for back in parking, Shift to "N" is OK.
Some time it can't shift out from PARK to "R" or "N" or "D" ... Under any of this situation,car engine would not start.
Sound like the SHIFT LOCK did not release properly, or the Brake paddle position switch input did not send to Computer for engine Start.
Phaeton :: PRNDS Lights Up Or Move Selector To P Message
What does it mean when the PRND2 area all illuminated at the same time? Normally only the gear selected will be illuminated, but yesteday I got a solid bar illuminating all the gear selections. Couldn't find any reference to it in the manual. Shut the car off and restarted and the problem went away.
View 24 RepliesFord A/C :: Selector Stuck On Dash Vent Position
I have a 2004 F250 6.0 truck. My vent selector is stuck in the 'dash vent' position. I can't switch it to defrost, floor, or anything else. This past winter I noticed that heat would blow well but only through the dash vents. Now that summer is well underway I noticed that the AC blows through the dash vents also, but it doesn't blow very cold. I checked the freon, topped it off (didn't overfill), and still have the same issue. I checked the fuses and all are good also.
Of course, moving the selector to Max AC doesn't work either. Does this all point to the blend door motor? I hope not as the reading I have done means that this is one tough project to tackle.
Phaeton :: How To Engage Gear Lever Into N Position With No Power
Left the car for a couple of days outside... and tried to start it latter at -38 C. No matter how convincing I was - the engine wouldn't run. Well, now both batteries are dead... I have no luck in engaging the gear lever into N position so we can tow it into a flatbad truck... any one knows how to do it with no power? Also is there a way to manually open up a trunk of the car?
There is seems to be some weird electrical issue... while car just sits in a parking lot - batteries are drained out of juice... if its driven even for a small period of time - everything seems to be ok. Thats a first real let down from this car.
Saab - 9-3 :: Key Won't Move In Ignition From Locked Position At All
I have a 2002 Saab 9-3. I tried starting it this morning but the key won't move from the locked position at all! What should I do? The steering wheel doesn't seem to be locked and I had the battery changed not to long ago.
View 5 RepliesSanta FE SM (2001-06) :: Key Stuck In Ignition On Accessories Position
I have a 2001 Santa Fe, and the key is stuck in the ignition. I can't even get it to turn to the Lock position, so it's stuck in accessories. Since I haven't had the funds to do so, I haven't gotten it checked out yet, and it's started to drain my battery. I have to jump it every single morning, so I'm wondering if there's anything I can do until I can gather up the money to fix it.
I have tried moving the steering wheel and shifting it all over the place and spraying DW-40 in there and a whole bunch of other things I've seen work for people on a bunch of different forums, but nothing works. I don't know if this matters, but before it got stuck, it would sometimes be hard to pull out or push the key into the ignition.
Ford Excursion :: Ignition Switch Stuck In Off Position
None of my 4 keys will operate my ignition switch.
It's stuck in off position. Steering wheel is not locked and I have pulled pretty hard on it to see if I could get the ignition switch to turn.
I have a new switch on the way but I have to get the old one out and don't know how to get old one out if I cannot turn the switch to on position.
Phaeton :: Sunshade Sometimes Gets Stuck In The Up Position
I have noticed that my rear sunshade sometimes gets stuck in the "up" position and will not come back down until I turn the the car off and re-start it. Some days it works every time, and on other days, it seems to have a mind of its own.
View 18 RepliesSaturn - Outlook :: 2007 XR Key Will Not Turn To Off / Stuck In ACC Position In Ignition
The key will not turn to off, stuck in acc. I have no power to the windows, sunroof, seat and seat heaters, and no brake lights, and the mirrors have no power either. I took the car to the local GM dealer who told me the ignition was not in any recall and found that the Body Control Module was bad and needed replacement.
View 5 Replies1997 Bravada Won't Start - Key Stuck In Ignition In Accessory Position
I have a 97 Bravada. Recently the check engine light came on and then went off. I didn't think anything of it at the time till the other day I drove it to work and back fine without any issues, then the next morning I tried starting it and nothing happened. No cranking, no interior lights, no sounds.
I tried jumping it thinking the battery was dead but that didn't work. Now my key is stuck in the ignition in the accessory position. It will not turn all the way back to release the key.
Cavalier :: 96 - Key Started To Randomly Get Stuck In The Middle Ignition Position
Quite awhile ago my key started to randomly get stuck in the middle ignition position but it was happening very rarely and some gentle jiggling was letting me take it out easily. Well a few days ago that went from very rarely to each and every time I start the car.
Now its a tossup whenever I go somewhere whether the key will pop out like it should or I'll have to fiddle with it for anywhere up to ten minutes.
The car never has a problem starting, its only when I have arrived somewhere and need to take the key out that is an issue. I've managed to remove it every time so far but it has taken a fair amount of WD-40, jiggling the bejeezus out of the key and steering wheel and plenty of patience.
Santa FE SM (2001-06) :: 2003 - Ignition Stuck In Start Position
I have a 2003 2.4L 5 speed manual Santa Fe. I was parking my vehicle and removed my key as usual and realized that the car was still running. I put it into reverse rolled back and back into 1st to roll forward just to make sure I wasn't dreaming. I ended up pulling the fuel pump fuse and disconnecting the battery to turn it off.
When I replaced the fuse and reconnected the battery I was able to bump start the vehicle without the key in the car and drive it all the way home with no problem. I took apart all the plastic pieces around the Ignition and attempted to remove the cylinder but was unable to locate any sort of small button or pin to push on to remove it. Where is the release button?
What are my options here? Do I replace the cylinder first or get a new key, or is there something else that I should check first before I take it in.
Chevrolet - Cavalier :: 2001 - Cannot Turn Ignition Off / Key Stuck To On Position
It's a 2001 Chevy cavalier. The key is stuck and won't turn the car off. Already have tried shaking the wheel and wd-40. The wipers won't work and the gauges won't turn on until I jiggle the key.
View 4 RepliesFord Ranger / B-Series :: 1996 XLT - Ignition Key Stuck In Off Position
My ignition key is stuck / locked in the off position. The first time this happened I jiggled the key while moving the wheel back and forth and it turned. The next time in the truck nothing worked. I let it roll back a bit then tried, pushed the clutch in and put it in neutral, etc it did not move. (Just had the clutch and clutch hydraulics replaced.) The wheel is locked. The key removes from the cylinder.
I know it is easy to replace the Ignition Lock Cylinder when you can turn the key in the run position. How to remove it when locked in off?
Phaeton :: Ashtray Stuck In Closed Position
I know this is a minor issue as problems go, but i put coins in my ash trays and just as i placed some coins in the driver ashtray i think one or two of them fell behind the tray and when I placed the tray closed, it closed and will not open. The more i pushed it the more it went in. How do I open this without damaging the wood.
View 1 Replies