Avalon 2005-12 :: CEL Error Code P0440 Error Code / Charcoal Canister Replacement
So of course it has to happen 3 weeks after my warranty expires. My CEL comes on and I have it read and the result is P0440. I find out that my wife has a habit of topping off the gas tank and so I am thinking that she has probably ruined the charcoal canister. It is something easy to replace?
I have an 06 limited edition... Yes, she will not be topping off any gas tank anymore.
Volvo :: Getting P0442 Code Periodically - Wrong Evap Canister?
I've been getting a P0442 periodically from my 97 850 wagon (base, no turbo). I've replaced the gas cap, the electrical part of the ignition switch, and all the deteriorated rubber vacuum-hose couplings I can find under the hood, but I'm still getting the code. I want to inspect the hose couplings at the evap canister, but there doesn't appear to be any way of getting to them other than removing the canister from under the car. Is there any other access to these?
Also, I've got VIDA running on my PC, and even though I've given it the VIN, it shows me the wrong evap canister in the parts diagrams. It shows the cylindrical canister, but my 850 has the rectangular canister. Where I can view accurate diagrams showing the evap components in this car?
Ford Ranger / B-Series :: 2003 V6 - Code P1450 - Location Of EVAP Canister And CV Solenoid
A buddy of mine has a 2003 Ford Ranger Edge V6 3.0L, he got the code P1450 the other day and asked me to look at it. Got all the info on what it could be but where ex actually is the EVAP canister and CV solenoid located? And what is the problem?
View 1 RepliesFord - Explorer :: 1999 - Code P1451 EVAP System Canister Vent Solenoid Circuit Malfunction
I have a 1999 Ford Explorer with the V-6 SOHC that is stuttering and stalling when I try to accelerate. A very slight acceleration will get the vehicle moving, but anything coming close to normal gas pedal pressure causes immediate stuttering and/or stalling. Check Engine light came on when problem started yesterday.
Where is the EVAP System Canister Vent Solenoid? I bought a code reader after beating my head against the truck all afternoon and got code "P1451 EVAP System Canister Vent Solenoid Circuit Malfunction". My Haynes book says on the left side frame rail... can't find anything along there that looks like it (based on picture from Rock Auto for replacement part) and found some people online talking about it being in the engine compartment on the passenger side...
Just crawled all over the truck and I think I found the charcoal canister, but couldn't trace it back to the vent solenoid... There was something right next to the canister, but again, it looked nothing like the replacement part listed on Rock Auto...
Camry :: 2004 - Charcoal Canister Malfunction
I have a 2004 Camry that has had ongoing issues with the Charcoal Canister over the past 3 years. The first time we came across this issue the car threw codes that indicated the Charcoal Canister had to be replaced. Our mechanic said it had to be done and there were no after market parts for this canister. We paid the $800 for parts and labour and had it replaced. Then 13 months later the car began throwing codes again. I had the car looked at again I was told the Canister would need to be replaced... They felt it was likely caused from the intake filter housing cracking. Each time our car does this the codes can be cleared for a bit but the car takes forever to fill and slowly over time you can no longer fill the car as there is so much pressure. This time I bought a used part and replaced the canister. This has happened again..
So we have now replaced this filter 3 times in three years. Can I ask how this canister continues to get gummed up? We live on dusty roads in the country but none of my other Toyota's have had any issues with this. How these canisters are getting gummed up? Is there any way for me to change this Canister myself if I buy them used? I saw in a video on this forum where the user shows putting the car up on a hoist and lowering the exhaust to get to the canister. Do you have to have a hoist? I am wondering if I can achieve this with the car on a blocks? My original mechanic said the rear suspension needs to be taken apart to access the canister? Can I ask where the dust is being drawn from to clock this filter to begin with? I have also been told you can try blowing out the lines? How to attempt this?
Ford Wiring/Electrical :: P1451 Code - EVAP Control System Canister Vent Solenoid Circuit Malfunction
I'm not too knowledgeable about wiring and electrical systems. I'm getting a P1451 code (EVAP Control System Canister Vent Solenoid Circuit Malfunction) on my 99 4.2. I've read that it could be a bad solenoid, bad wiring, or a blown fuse. So far I've;
- checked (and changed) the related fuse
- checked the wiring for damage at the connector
- checked voltage at the connector (12 volts)
- checked the resistance at the solenoid (around 60 ohms)
- actuated the solenoid with a 9V battery (can hear it opening and closing)
I haven't had a chance to check the wiring all the way back up the frame to yet, but I noticed that the ground at the trailer wiring harness has broken off the frame. Would this potentially cause a fault in the upstream wiring? I'm going to slap a new connector on and bolt it back down anyway, but as it's Labour (Labor) Day I'll have to wait for the stores to be open tomorrow.
Prius (2004-09) :: CEL Came On, Charcoal Canister Pump Needed To Be Replaced
I just took the car to the dealer, for a recurring Check Engine light, and after changing the gas cover 2 months ago, now they tell me that it needs to replace the Charcoal Canister pump . I have a 2008 Prius, bought used 18 months ago, with approx. 70k miles
View 4 RepliesToyota - Corolla :: Check Engine Light Stays On - Charcoal Canister?
1998 Corolla LD ... Diagnostic tests show that my check engine light stays on due to a charcoal canister. Is this an expensive repair?
View 7 RepliesSubaru - Outback :: 1999 - Evaporative / Charcoal Canister Port Blocked?
I drive a 1999 Subaru Legacy Outback.I had a cracked evap canister, so I went to the junkyard and grabbed another. I installed it, but had problems filling the gas tank. It would fill a few seconds, then shut off. So, I got home, pulled the evap canister, and blew through each of the three ports. Two of them had air flow in and out to each other, the third was blocked. Checking the ops diagram, looks like that port runs to the intake manifold. Should it be blocked (has a check valve or something), or should it have airflow?
View 2 RepliesFord - Excursion :: 2011 - Excessive Vapor Smell From Charcoal Canister
I have a 2001 Ford Excursion 6.8L V10. It runs like a champ, gets really good mileage for what it is, but there a strong fuel vapor smell coming from the charcoal vapor canister under the hood. You can smell it outside the truck and the smell gets pulled in through the vents - have to use Max AC recirc.
After checking and testing, I can confirm that the fuel vapor smell is coming from the charcoal canister and not anywhere else on the engine. The smell gets worse as the tank drains: Full Tank - Almost No Smell; Half Tank - Strong Smell; 1/4 Tank - Very Strong Smell.
Here is all that we have tried.-Replaced Fuel Cap (Genuine Ford)-Visually inspected the Evap Lines - Look Good-Visually inspected Fuel Line and Fuel Filter - Look Good-Checked the Fuel System for Leaks - None-Pressure Tested the Fuel System - No Leaks-Ran Multiple Smoke Tests on Evap System - No Leaks-Checked the Computer for Codes - No Codes-Replaced the Charcoal Vapor Canister (Genuine Ford)
We are totally stumped. I searched all the forums and can find issues with plugs, fuel injector o-rings, and leaks, but this has all be checked.
Azera TG (2006-11) :: Error Code P2422 Related To EVAP System
I have a 2006 Hyundai Azera that is coming up with the error code P2422. I have figured out that the code relates to the EVAP system. I have cleared the code a few times but it always comes back within a few kilometers. Also I have started to notice at some gas stations that the gas stops pumping around every $5 i put in the tank. This only happens at some gas stations but not all that i go to.
View 3 RepliesAccent LC (2000-05) :: Error Code P0442 Indicating A Leak In Evap Emissions
This began as a troubleshooting exercise for a P0442 code (2002 model) indicating a leak in the evap emissions system. Often caused by simple things like a loose/poorly sealing filler cap. Not this time
It's a neat design, tucked away up in the fender well. Even sports a very effective stone guard (plastic shield) which hides all that tubing from view. But the shield also traps all the road salt and mud and packs it into the crevices between the tubes where it stays from one winter till the next. Even a powerful car wash probably can't dislodge the caked on mess once solidified.
Prius (2004-09) :: Multiple EVAP Codes - Canister On Top Of Gas Tank Is Bad
I took my 2008 prius with 183,000 miles in last week to have recall work done on it. they did the following:
1. Accelerator pedal recall
2. Steering shaft recall
3. Hybrid Electric water pump recall
The following day when I start my prius my check engine light comes on so I figure it was something they did on the recall work. I do have a scangauge, and the only code that showed on it was a P1304. I took it back to dealer today, and was told that it had multiple EVAP codes, and that the canister on top of gas tank is bad, and will need to be replaced. They said it was full of gas. They asked me if I stopped fueling car when pump shut off? I told them I always go to next whole dollar. They said to always stop as soon as pump shuts off(but on some pumps they shut off like crazy when pumping gas), I told them to just clear codes, and I would get back with them if I decide to have canister changed. So far check engine light has stayed off ( dealer is about 100 miles away)
Ford - Windstar :: Location Of EVAP Canister Purge Solenoid?
Where the EVAP canister purge solenoid is located on a 1999 Ford Windstar with the 3.8 engine?? I replaced the vent valve that is located on the canister itself but cannot locate the purge solenoid valve.
View 2 RepliesFord - Explorer :: 1994 - Missing Connector For EVAP Canister
I'm converting the automatic in my 94 explorer to a M5OD-R1 five speed transmission. I got the manual wire harness from the donor truck and it plugs into the existing connectors, but it's missing a connector for the evap canister. Should I just use the automatic harness and modify it to bypass the clutch safety switch and wire a switch for backup lights? Or use the manual harness and wire the evap canister to the ecm? I'm not much of an electrician, just trying to find the correct way to do this so the truck runs good.
View 3 RepliesSanta FE SM (2001-06) :: 2004 - Check Engine Light Is On / EVAP Canister Solenoid
I have a 2004 Santa Fe 2.4L the check engine light is on and says about the evap canister solenoid. I am trying to located it but I can't find it. So, where would it be located at so I can take it apart and where is the Canister located as well...
View 1 RepliesSebring - Chrysler :: Blower Motor Will Not Stop / Error Code PO4091
Blower motor will not stop after engine is turned off. Is this a relay switch issue? Motor will run at very high speed. After a few minutes it would intermittently turn on and off. Battery was discharged two days ago. I forget how to test these relay switch, been a while since I've used my old DMM. Anyway, I've got an error code PO4091 (secondary air inj sys insufficient flow, bank 1). I lost the info on the two other error codes, but I will dig it up later and see if at all related.
Off topic. Found a vacuum line broken, reinserted the remainder of the tubing, so good for now on that end. It's by the TEE next to the battery. No wonder this one was stalling around 600 RPM and on low speeds around 600 RPM. New coils wires and spark plugs. Runs smoother now.
Passat (B5) :: MIL Came On - Code P0455 / EVAP Emission Control System Leak?
New owner of a 2003 1.8TPassat (29,000mi) as of the last 2 weeks and have just had my MIL come on. Scanned it at home with my Actron CP9125 scanner and got this code (P0455) which reads in the scanners manual as "EVAP Emission Control System Leak (Large)". Didn't know if this was a generic description of the code or VW has a more specific definition. What precisely this is in reference to, gas cap, vacuum hose????? Or what VW's actual description of this code is?
View 3 RepliesPassat (B6) :: Evap Small Leak Intermittent Code P0442 Strikes Again
I've gotten the P0442 "small leak - intermittent" code and "service now" warnings on my 2007 2.0T Passat. I have also occasionally gotten the "check gas cap" warning and icon on the dash, but it always goes away quickly. The car runs fine. The VCDS scan shows as follows:
Address 01: Engine Labels: 06F-907-115-AXX.lbl
Part No SW: 3C0 907 115 S HW: 8P0 907 115 B
Component: 2.0l R4/4V TFSI 0020
Revision: --H14--- Serial number: VWZCZ000000000
Coding: 0404010A19070160
Shop #: WSC 24125 444 85663
VCID: 3041CBF8A31AF19890B
1 Fault Found:
001090 - EVAP Emission Control Sys
P0442 - 001 - Small Leak - Intermittent
[Code] ....
If I clear this code, it comes back within a day or two of driving, but not immediately. I have already replaced the gas cap and N80 valve. The other component I'm aware of possibly failing is the check valve. It's just downstream of the N80 valve, circled in red here:.
I put a vacuum on this part, and it had a very slow leak, losing about 3psi (starting from 20psi) every minute. That seems too small a leak for this to be a problem? Is this thing supposed to be absolutely air tight? Since this part is more expensive ($80) and bit more hassle to replace than the N80 valve, I'd like to know more about this before I just blindly replace it.
If this check valve isn't the problem, then what to check? Although the car runs fine, I need an inspection and would prefer to not have to clear the codes and hope for the best just before taking it in.