GTI 337/20th Anniversary :: Bolt Pattern For The Rims?
what is the bolt pattern for the rims of a gti 20th anniversary??
View 1 RepliesFord - Explorer :: 1979 - Bolt Pattern Same In F And E Series Seats?
I have a 79 f100 that I am putting 96' explorer seats in. Got the tracks all made, decided to have the seats re done as a cat pissed on them.
went to talk to the guy doing the seats today and he can get new foam and won't make new foam. So my question which seats whether it be from an F series or E series has the same bolt pattern as the 96' style seats. so I don't have to make new brackets. Will the fox body mustang seats work as well?
Ford Escape / Hybrid :: 2007 - No Shift Into 2nd And 4th - Transmission Bolt Pattern
I have a 2007 Mercury Mariner with a 3.0 Liter V6 engine AWD. The transmission is giving me a problem. No shift into 2nd and 4th. Solenoid or band broken I think. Is the bolt hole pattern to attach the tranny to the engine different between the 3.0 V6 and the 2.3 I4?
View 3 RepliesFord Super Duty (1999-2016) :: Triton Engine Bolt Pattern
Need to know if the 5.4 and 6.8 use the same bell housing pattern?
View 5 RepliesPassat (B5) :: Bolt Loose On The Tie Rod
Have 2001 B5 2.8 4Mo. I have the bolt loose on the tie rod. I have the nut loose on the pinch bolt. I have the lock nut loose on the linkage. The tie rod will slip out 1/4 inch but will not come out of the way. I have hammered the crap out of it. Still no go.
View 6 RepliesPassat (B5) :: How To Remove Restraining Bolt For Tie Rod
First of all... do I need to remove both, the restraining bolt AND nut to remove the tie rod end... if yes, than this bolt seized, the nut is easy but even if I punch the bolt it wont move... ??
View 4 RepliesPassat (B5) :: Changing Sway Bar - Can't Get The Bolt Out
I did change my motor mounts this weekend but when I tried to remove the sway bar,one of the nuts jammed on the bolt. Let me explain:The nut unscrewed well until the lasts mm, and then, the bolt head came loose, so it was spining freely with no way to remove it but cutting it, the bolt seems to be BUILT IN the alum. bracket that supports the engine mount. Question: can I change this bolt or is it really built in the bracket? I searched on ETKA but it just shows the nut and I can't find the bolt that I need.
View 1 RepliesPassat (B5) :: Can't Remove Sway Bar Link Bolt Out
Car: 02 Passat GLX 4motion V6 AWD
I'm in process of replacing the rear strut and I can't remove the way bar link bolt out. It is really tight into the inner rubber and it won't buzz. The bolt sits in a way that I can't use a hammer.
Passat (B6) :: Bolt Failure On Oil Pump Assembly?
Bolt failure on oil pump assembly in 2.0t FSI engine
View 9 RepliesPassat (B6) :: What Is The Part Number For Torque Insert Stretch Bolt
As the title implies I need the part # for the OEM VW Stretch bolt that holds the Torque Arm insert in place. I've had the mount on my car for a few months now and I've grown tired of it.
I re-used the OEM bolt the first time and I think I'm better off replacing it as it may not be wise to unbolt it and re-torque it for a third time. Looking for the part # for the stretch bolt? I believe it's 21mm.
Passat (B6) :: Replacing Brake Lines - Banjo Bolt Torque Setting
Going to replace brake lines tomorrow and would like to confirm the torque spec on the actual banjo bolt as not to break them but also don't want to leave them too loose...
View 3 RepliesPassat (B5) :: How To Get Passenger Side Engine Mount Bolt To Stop Spinning
So I just replaced my oil pump and i am reassembling my front end and I just cant get my passenger side engine mount bolt to stop spinning so i can get the nut on (the mount underneath the car) , I have no clue how to stop the spinning
View 1 RepliesPassat (B6) :: Changing Lower Control Arms / Driver Side Bolt Is Hitting Transmission Oil Pan
I changed the Passenger side with no problem , the driver side bolt is hitting the transmission oil pan. I am thinking of loosening the mounts and try to jack the pan up to get that 1 clearance or worst case drain the transmission take the pan off remove the bolt and put in fluid in. If I drop the the transmission pan is there a filter in there? also how much transmission fluid does it hold.
[IMG] ....
Camry :: Tire Rotation Pattern
I found this thread in the Corolla forums and was curious as to what pattern people use here since I will be rotating the tires on my '07 Camry myself for the first time. The manual says to use Pattern D for non-directional tires, but my Civic manual and a few other cars I have looked up suggest using Pattern C, which make more sense to me as it would seem to provide more even wear on both sides of the tire by crossing them to opposite sides of the car.
View 5 RepliesPhaeton :: Low Beam Pattern Is Messed Up
I hit a bird at highway speed a few weeks ago, and the impact was enough to knock out the sidelight bulb. I thought the rest of the headlamp had survived OK, but now the evenings have turned dark I notice that the low beam pattern on that headlamp is completely messed up.
For those of you that have delved into the headlamp assemblies, is it possible for some part to have become dislodged such that the bulb is no longer correctly aligned with the lens?
I suspect I'm going to have to take off the bumper and dismantle the headlamp, but it would be nice to know what I might expect to find. If I find the low beam assembly damaged. I have the bi-xenons, so I'm aware from previous threads that getting the low beam out of the headlamp is a bear!
IS F (2008-2014) :: New Headlight - Beam Pattern Not Right
So I finally got my car back after being repaired from the fender bender I was in, and I had to get a new right headlight but I just noticed that the beam pattern isn't right. I just picked up the car and brought it home so I'm not sure if this is a characteristic of a new headlight and bulb. I feel like they put in the wrong bulb or they didn't install it correctly?
View 4 RepliesBuick - Parkavenue :: Stalls With No Obvious Pattern
I own a 1999 Buick Park Avenue - that stalls. There is no pattern to the stalling.It stalls when I start driving, after I have been driving for a long period or when I just begin driving. It stalls when I turn a corner or on the highway, when I am at a stop sign or a red light. It is baffling. My mechanic has tried a number of solutions, including replacing the crankshaft sensor, however, it still stalls.
View 2 RepliesAvalon 2005-12 :: Cross X Tire Rotation Pattern
Cross X tire rotation pattern on Avalon as opposed to just rotating from front to rear?
View 2 RepliesCorolla / Matrix 2009-13 :: Tire Rotation Pattern
The 2010 Corolla Manual illustrates on page 329 pattern "D" as if to suggest we have "same size directional" tires. It is my understanding directional tires will have an arrow on the sidewall. If it doesn't have an arrow, it's non-directional and it doesn't matter which way it rotates. I don't see an arrow on my tires. Which of the following patterns are you using?
View 13 Replies