Sonata I45 (YF - 2011+) :: Clicking Noise After Brakes Applied
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 RepliesSonata NF (2006-10) :: Noise Like Grinding Sound When Brakes Applied To Stop
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
Sonata I45 (LF 2015+) :: Brakes Making High Pitched Noise When Applied And Backing Up
With only 1,800 miles on my 2016 Sonata Limited, the brakes make a high-pitched noise when applied and backing up. I noticed yesterday the noise has also started as I brake for red lights.
View 5 RepliesChevrolet - Malibu :: 2008 - Clunking Noise When Brakes Applied And Died?
I have a 2008 Chevy Malibu. Lately when the engine is cold I will get to the end of the street and when I apply the brakes the car will make a clunking noise and a couple of times it has actually died and I have to restart the car. I only experience this the first thing in the morning, after that the car seems fine. I cannot tell if it is the brakes causing the problem or the transmission.
View 5 RepliesHyundai - Sonata :: 2003 - Grinding Noise While Turning Left
I drive a 2003 Hyundai Sonata. I currently have a slight grinding noise (or maybe more of a low growling) when I make left turns. This happened in the not-so-distant past and it was an issue with the power steering hoses (one had rusted through), so we (and by "we," I mean my fantastic father) changed it out. I thought this time it may just be low power steering fluid, but after checking it, I can say it's not low. I'd think if a hose was the culprit again, the fluid would be low. What we should look into?
View 1 RepliesSonata I45 (YF - 2011+) :: One Brake Light Goes Out When Brakes Applied?
So I was told I had a brake light out? Went and bought new bulb and replaced. Turn on headlights and the single filament lights. so when brakes are applied the second filament should light up that give the brighter affect.
Well when brakes applied the bulb goes out completely? Take foot off brake and the single filament comes back on. The other tail light operates as it should. Even used bulb from working tail light with same results.
Sonata I45 (YF - 2011+) :: Engine Quits When Brakes Applied
Car started fine but stalled on first brake application with the skid-control light illuminated, restarted fine but stalled again on next brake application (skid-control light stayed on). Decided to head for the dealer which was only a few blocks away, drove there knowing that it may stall when brakes were applied (engine would start, idle and operate when driving but the problem would only occur on brake application.... approx when the transmission would down shift to third or second gear). My last stop before turning into the dealer's parking lot, the engine quit and refused to restart.... finally came back to life after about 5mins and was able to complete my somewhat dangerous trip (whole journey was on very quiet back streets). At first I thought it could be related to the infamous brake switch but the service rep informed me that they couldn't communicate with any control module with the scan tool. Now I sit and wait, hopefully they will call with some good news soon.
View 9 RepliesSonata NF (2006-10) :: 2009 - Loud Creak Whenever Brakes Applied
A couple of months ago the front driver side of my Sonata started creaking whenever I applied the break. I took it to a local mechanic as well as Hyundai service and after a couple of thousand dollars, it still makes the noise . Both upper and bottom control arms were changed, rotors, pads, brakes, bearings, strut mount, and some other minor stuff that I can't recall...its loud and ANNOYING....
View 3 RepliesSonata NF (2006-10) :: Vibration When Brakes Applied / Front Tire Does Not Hold Air
I bought a brand new 2010 Sonata in April 2010. So far I only have 2500 miles on it. The problems I am having are:
1. When I apply the brakes, there is some vibrating sounds coming...
2. The passenger side front tire does not hold air more than 25-26 psi.. If I raise it to 34 or even 32 psi, it drops down to 26 psi within a week and then stops leaking...
Sonata NF (2006-10) :: 2007 - Brakes Pulsating (when Applied) At Highway Speeds
I recently bought a 2007 Sonata V6, and the brakes pulsate (when applied) at highway speeds, so I am looking to replace the front rotors & pads. I have been told that the OEM rotors/pads aren't great & that as a result many owners have a brake pulsating/vibration issue.
View 9 RepliesPassat (B6) :: 2008 - Grinding Sound When Brakes Applied
2008 Passat Komfort Wagon with 34,500 miles. Started to get grinding sound when I applied brakes, which diminishes as I drive. Thought it was rust, but sound is very loud and sounds just like pads are gone and digging into rotors. The brake warning light is not on.
Dealer told me rear caliper was closing unevenly and recommended service---not covered by warranty of course. When I picked-up car same noise as before. The service manager told be that the car was just washed and the rust built up in the last hour---I could believe some built-up, but the sounds made my teeth ache. When we went for a test drive the noise got quiter, but was still apparent. The SM told me this is a "normal" noise. I have had many cars with disc brakes, dating back to a 1960 Jaguar; none have made this "normal" sound.
Subaru - Brakes - Steering - Outback :: 2008 - Whining Noise In Engine / Clunking While Turning?
My outback has 57k miles on it and already needs the front struts and rack replaced (diagnosed today at the Subaru dealership). The car has been making a whining noise in the engine and has been clunking when making turns for the past week. I have also noticed it hasn't been taking bumps as smoothly. They told me that both ends of the rack are leaking and both front struts are leaking. My husband did admit to hitting the curb on the driver side front tire pretty hard while making a u-turn about a month ago, but all other driving is pretty standard. Yes, we drive on dirt roads in the mountains a few times a year for hiking, but don't drive in a manner that I consider wrong. Did the u-turn incident cause this? (hard to believe that would affect both sides of the rack and struts).
View 2 RepliesLexus GS 2006-11 :: 2008 E-Brake Loose - Car Not Stopping When Brakes Applied
My 2008 gs 350 E-brake or parking brake isn't as tight anymore on a hill it doesn't stop my car when applied when parked how to adjust this? I rather not go to the dealer if its a simple fix?
View 5 RepliesDodge :: 2008 - Rear Passenger Wheel Squealing When Brakes Applied
I have been doing my own brakes for years. I have had some that were not easy to keep from squealing but this one has me wanting to get rid of the car. We have a 2008 Dodge Magnum R/T package. Roughly 38K miles on the car. When the car reached around 10K miles the rear passenger wheel would squeal when you applied the brake. Rotor surface was smooth as glass. I took off the rear rotors only and had them turned. Problem went away for about 5K miles. Then the fronts started squealing.
I replaced the fronts because hte factory did not leave any material to be turned and noted that Dodge glued the pads to the calipers like they would never need to come off. Problem went away for a little while. Then it came back with a vengeance. I replaced the pad material on the fronts with ThermoQuiet pads from Raybestos. Problem is coming back again and now I cannot tell which end of the car it is even coming from because it it so loud. My wife drives this car very carefully. My thought is she is polishing the rotors too smooth and this is our source of noise.
We are at the point of squealing again and I am at my wits end with this. If I light foot it, no noise. If I stop like I think it should be stopped, not killing it, the noise is there. If I stop very quickly about 3 to 5 times in a row the noise is gone for a little while until the pads cool and then it is back even if I am on the same journey.
Hyundai - Sonata :: Radiator Fan Not Turning On At Temp Or With AC
2006 Hyundai Sonata Radiator fan is not turning on at temp or with AC. Fan works with 12 volts and a good ground at the connector. The car side of the connector has 14.5 volts on the positive side and 12.5 volts on the negative side with car running and AC on. Why is there 12.5 volts on the negative side and more importantly. how to resolve?
View 5 RepliesSonata NF (2006-10) :: Turning Off Alarm In 2007 Hyundai
So my battery is dead dead.... Looking to charge it, but of course, the alarm goes off. How do I turn it off?
View 2 RepliesHyundai - Sonata :: Screeching When Turning Coming From Radio Speakers?
I have an annoying screeching sound when turning my 2011 Sonata right or left. When I shut off the radio to hear the noise better it goes away...is something causing interference with the radio?
View 10 RepliesPrius (Gen 1) :: Pulsing Raspy Noise When Brakes Are Applied?
Our gen 1 has developed a (currently minor) noise issue when braking. I'd like to sort it out before it becomes serious.
The brakes are still strong, and the regenerative system appears to be working. When the brakes are applied (even gently) there is a pulsing raspy sound, seems like it is coming from the front, driver's side. It is more rapid at higher speeds, and louder during rapid deceleration. I guess I'd call it 'grinding', although this is much less unpleasant than the classic 'grinding brakes' I've heard on other cars.
In any other car I would figure a warped rotor or worn out brake pad. But I had imagined that the regenerative system handled light braking, and conventional brakes took over beyond a certain threshold. Now I'm hoping they work in tandem, even on gentle braking and this is just a boring, simple pad issue.
Buick - Century :: Noise First Time When Brakes Are Applied Each Day
Does this mean I need to see a mechanic. My car is a 97 buick century, 94kmiles. Rear brakes were replaced at 83k and front brakes were replaced at 80k. A few months ago, the noise began and has persisted once a day when brakes are applied first time of the day.
View 5 Replies