Prius (Gen 3) :: Grinding Noise From Front End When Applied Brakes At U Turn
Coming to a left turn signal I was anticipating it turning red on me, and I drove into the turn lane briskly 30mph and then applied brakes as I made a u-turn. It sounded like a cross between dragging the front air dam and metal on metal brake grinding as I made the turn. Stopped immediately and did not scrap the air dam and all front end components checked out, okay. Car is driving just fine now, has only done this once.
View 18 RepliesPrius (Gen 2) :: Single Clicking Noise When Brakes Applied At Slower Speeds
When I gently apply the brakes at slower speeds there is a single "click" noise. This happens every time. I took it to the dealer. They said it was normal. I am just trying to find out if indeed it is. Do other people get this click when they apply the brakes.
View 19 RepliesBuick - Century :: Noise First Time When Brakes Are Applied Each Day
Does this mean I need to see a mechanic. My car is a 97 buick century, 94kmiles. Rear brakes were replaced at 83k and front brakes were replaced at 80k. A few months ago, the noise began and has persisted once a day when brakes are applied first time of the day.
View 5 RepliesGolf/GTI VI :: Grind Noise When Applied Brakes On The Freeway
So I drove 400 miles today and when I was just about home I heard a grind when I applied the brakes on the freeway. Well I did a walk around the car to check all the pads and noticed my rear pads are almost gone. I'm not used to having the rear brakes implemented in so much of my daily driving, with the TCS and all.
To make it easy I'd like to keep all four corners on the same brake setup, I'm just not sure what is ideal on this car. I know OEM is gonna be said, but I upgraded my front pads to Hawk HPS'.
Tiguan :: Brakes Making Grinding Noise When Applied
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 RepliesSonata I45 (YF - 2011+) :: Clicking Noise After Brakes Applied
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 RepliesHyundai - Sonata :: 2008 - Noise When Turning With Brakes Applied
I have 2008 Hyundai Sonata. I hear some noise from front wheels when i turn to right or left with breaks applied. There is no any noise when turning without break. the cv joint has been replaced but no any result. Still there is noise.
View 8 RepliesPrius (Gen 3) :: 2011 Sometimes Lurches Forward When Brakes Applied
I've had my 2011 Prius II for two months, and I love it. One little thing bugs me, however. I have noticed that sometimes when I apply the brakes, the car lurches forward a little bit. But I keep the brake pedal on, and the car does stop. Is there something wrong with my brakes, or is this something that has to do with the regenerative braking?
View 19 RepliesPrius (2010-12) :: Lurches Forward While Brakes Are Applied
I have a 2012 Prius with 15000 miles on it. In the year I have had it, I have had this problem a few times. On rare occasions while I am braking the car seems to lurch forward. In particular I have noticed it while braking and hitting a bump. The problem is that when this happens the car seems to jump forward while the brakes are being applied. My foot is on the brake when it happens, but I am not braking suddenly. That rules out any anti-lock braking. I have had the dealer look at it but since it didn't happen on their test drive they couldn't figure anything out. They did open a case on it in case anything comes up.
View 9 RepliesPrius (2004-09) :: Jerky Stop When Brakes Applied
Just had a couple questions, The first one is in regards to the brakes on my '09. I've read that the brakes themselves don't actually kick in until you are going 7 mph or less. Anyways, when I am coming to a stop it is not necessarily smooth. I try my best to apply even pressure to the brake, but I basically come to a jerky stop. Is this common in a Prius? I bought my car certified pre-owned last month and I know the brakes were one of the checklist items.
View 2 RepliesCorolla / Matrix 2009-13 :: Right Side Make Lot Of Noise When Brakes Applied
I have problem with left front brakes corolla. When I changed the router it was fine, but after few month, during down hill when I apply brake, right side make lot of noise. I cleaned pads and pin are good. It happens only on right side, down hill is problem.
View 2 RepliesPassat (B6) :: Constant Whine Noise While Driving When Brakes Fully Applied
I am new and just picked up a used 2008 Passat yesterday. It has 42k miles and what I had thought in perfect condition. I wanted to see what was going on before I took it into the dealership to get repaired. When driving I hear a constant whine / (like water is on in a house) type noise. Its noticeable all the time except when the brake is fully applied. It comes back once the brake is depressed and in park. I thought at first maybe it was just a brake pad rubbing but the constant noise in Park confirms its something else.
View 2 RepliesToyota - Echo :: 2003 - Knocking Creaking Noise When Brakes Applied
I have a 2003 Toyota Echo. About 6 months ago it starting making a knocking noise when I applied the brakes. I thought it was my differential (it isn't) because it is a used transmission. That's not it. My mechanics were stumped, of course it never seems to make the noise when they have my car. They also checked the rotors, and I maintain my brakes.They replaced a wheel bearing on the left front wheel, the noise stopped for two weeks then started up again. Only when I use the brakes do I hear it, and I hear it more often than not.
There also seems to be a bit of a creaking noise with it. It does it more in stop and go traffic, and the car usually has to be a little warm before it gets noisy. They ended up replacing a rear drum thinking the noise transferred to the front, didn't work. What could this be? it's pretty loud and disconcerting when I'm driving. It only happens when I use the brake (more so slower speeds) so what is left besides the wheel and the brakes? My mechanic said the noise stopped when they replaced the wheel bearing because they took the wheels off, and that somehow fixed it temporarily.
Touareg :: 2005 V8 Making Squeal Noise While Driving That Actually Goes Away When Brakes Applied
Guys, my 2005 V8 is giving me the annoying sign (making a squeal noise while driving that actually goes away when I apply the brakes) that my pads are wearing out. "Just brakes" quote me $89 to change the pads. That sounds too good to be true.
View 5 RepliesSonata NF (2006-10) :: Noise Like Grinding Sound When Brakes Applied To Stop
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
Passat (B5) :: 2003 - Brakes Makes A Squealing Noise With No Pressure Applied
So I have a 2003 Passat wagon. While driving down the road with no brake pressure applied the front right brake makes a squealing noise. As if the caliper doesn't release pressure....what should I do? Any hints?
View 6 RepliesChevrolet - Malibu :: 2008 - Clunking Noise When Brakes Applied And Died?
I have a 2008 Chevy Malibu. Lately when the engine is cold I will get to the end of the street and when I apply the brakes the car will make a clunking noise and a couple of times it has actually died and I have to restart the car. I only experience this the first thing in the morning, after that the car seems fine. I cannot tell if it is the brakes causing the problem or the transmission.
View 5 RepliesPassat (B7) :: Clunk Or Pop Noise From Left Front Wheel When Brakes Applied
I have started hearing a noise with my brakes. First thing in the morning when I back up and apply the brakes, I get a clunk or pop noise from the left front wheel. It will pop again once I move forward and hit the brakes. It only does the noise one time when I first apply the brakes in either direction. Once the brakes have been used out on the road and are warm, there is no noise when changing directions. I've had this noise in another car I used to have and it was caused by the aftermarket brake pads not being exactly large enough and there was slight pad shifting in the caliper. Being this is a new car and has the OEM pads, I would hope there would be no pad shifting or movement in the calipers.
View 17 RepliesCadillac :: 1950 - Front Right Makes A Grinding Noise While Brakes Applied?
1950 cadillac - standard drums on all 4 corners.
I put new wheel cylinders on each drum, and replaced the drivers front hose, as it was clogged. The passenger side I left because it works and doesnt leak. I've cleaned all the brake surfaces, shoes and drums, and bled everything.
When I brake, and only when I brake, the front right makes a grinding noise and the car pulls to the right.
I tried tightening the star wheel today to bring the shoes inward in hopes that would equalize brake pressure up front, but when trying again today, I got that grinding sound still.
There is no scoring or gouges on the shoes, drum, and the inner and outer ball bearings seem fine - round chrome balls with no discoloration, no gouges on the spindles. Granted I don't drive this far at all, especially now that I have this grinding.
How can I really tell if its the ball bearings? It only makes the grind when I am on the brakes.