Sonata NF (2006-10) :: 2009 - Loud Creak Whenever Brakes Applied
A couple of months ago the front driver side of my Sonata started creaking whenever I applied the break. I took it to a local mechanic as well as Hyundai service and after a couple of thousand dollars, it still makes the noise . Both upper and bottom control arms were changed, rotors, pads, brakes, bearings, strut mount, and some other minor stuff that I can't recall...its loud and ANNOYING....
View 3 RepliesSonata NF (2006-10) :: Noise Like Grinding Sound When Brakes Applied To Stop
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
Sonata NF (2006-10) :: 2007 - Brakes Pulsating (when Applied) At Highway Speeds
I recently bought a 2007 Sonata V6, and the brakes pulsate (when applied) at highway speeds, so I am looking to replace the front rotors & pads. I have been told that the OEM rotors/pads aren't great & that as a result many owners have a brake pulsating/vibration issue.
View 9 RepliesFord F-150 (2009-2014) :: Bad Vibration When Brakes Were Applied
I have a 2012 FX4, 5.0. The dealer tuned the front rotors and replaced the pads at 19k because of a bad vibration when brakes were applied. Now at 45k, the same thing is starting to happen again. I am pretty sure it is not my driving because my 2001 F150 4x4 had 162,000 miles on it and never had a rotor off of it or turned and was on the 3rd set of pads when I traded it on the 2012.
View 14 RepliesFord - F250 :: 2001 - Shake And Vibration When Brakes Applied
My F-250 7.3 liter diesel is eating up front tires. I have tried new upper and lower ball joints, new shocks, alignment, and new tires (again). Tire wear is on the outside right and inside left. At times when the brakes are applied it causes a shake and vibration. One mechanic though I should get the leaf springs redone.
View 4 RepliesFord Brakes/Suspension :: 2006 2WD - Excessive Tire Noise Coming From Right Front Mostly
I have a 06' Ranger 2WD with General Grabber tires that have about 30,000 miles on them and still show significant tread remaining.
Within the last 2 months, I have experienced excessive tire noise - like I am driving a Humvee or something. Also, when I turned right or left the tires would make even MORE noise - it seemed to be coming from the right front tire mostly. 2 weeks ago I had the tires rotated and the sound seems to have reduced while turning but I still have the howling Humvee noise while driving down the road. There is no vibration coming from the wheel, so I don't think it's a balancing issue. Could it be the bearings?
I also checked the PSI all around and one tire does have a slow leak but I try to keep to topped off.
Sonata NF (2006-10) :: Clunk When Front Tire Hits A Dip
06 Sonata GLS V-6 ... While driving and you hit a dip in the road I get a clunk. It only happens when the tire has to drop suddenly. When it bumps up it's quiet. I live 1 1/2 hours from a reputable repair place, over 2 1/2 hours from a Hyundai dealer.
View 2 RepliesFord 6.0L Power Stroke Diesel :: Vibration Noise When Brakes Applied
I have a 2007 Ford F-250 6.0L that's making a vibration noise when I come to a stoplight with my foot on the brake, just idling. I just recently replaced the front brake pads this past weekend. I looked under the hood and visually checked for any obvious things that could be making the noise and did not find any, I did notice my power steering pump is damp with fluid. Now this noise only occurs when my foot is on the brake, anytime my foot is off the brake, it goes away.
I checked brake fluid level and power steering pump fluid level, both are fine except power steering fluid looks like chocolate milk. I don't know if the power steering pump would be the cause of this, but I'm going to replace it because it's leaking and I'm guessing the fluid for the power steering is way overdue. I've only owned this truck since March of this year and it has 128,000 miles on it. Hopefully this video link to youtube works, the sound in the video is the same noise that I'm hearing from the truck. Where this noise is coming from.
Vibration noise powerstroke - YouTube....
Sonata I45 (YF - 2011+) :: One Brake Light Goes Out When Brakes Applied?
So I was told I had a brake light out? Went and bought new bulb and replaced. Turn on headlights and the single filament lights. so when brakes are applied the second filament should light up that give the brighter affect.
Well when brakes applied the bulb goes out completely? Take foot off brake and the single filament comes back on. The other tail light operates as it should. Even used bulb from working tail light with same results.
Sonata I45 (YF - 2011+) :: Engine Quits When Brakes Applied
Car started fine but stalled on first brake application with the skid-control light illuminated, restarted fine but stalled again on next brake application (skid-control light stayed on). Decided to head for the dealer which was only a few blocks away, drove there knowing that it may stall when brakes were applied (engine would start, idle and operate when driving but the problem would only occur on brake application.... approx when the transmission would down shift to third or second gear). My last stop before turning into the dealer's parking lot, the engine quit and refused to restart.... finally came back to life after about 5mins and was able to complete my somewhat dangerous trip (whole journey was on very quiet back streets). At first I thought it could be related to the infamous brake switch but the service rep informed me that they couldn't communicate with any control module with the scan tool. Now I sit and wait, hopefully they will call with some good news soon.
View 9 RepliesSonata I45 (YF - 2011+) :: Clicking Noise After Brakes Applied
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 RepliesHyundai - Sonata :: 2008 - Noise When Turning With Brakes Applied
I have 2008 Hyundai Sonata. I hear some noise from front wheels when i turn to right or left with breaks applied. There is no any noise when turning without break. the cv joint has been replaced but no any result. Still there is noise.
View 8 RepliesFord Super Duty (1999-2016) :: 2003 F350 - Vibration / Shaking When Brakes Applied
I have a '03 F350 that I can't seem to solve the brakes vibrating when applied. Replaced front rotors a couple weeks ago. I still have a vibration when I apply the brakes. What am I missing? I didn't replace the back rotors, but maybe I should have. On the passenger front, the inside pad was almost gone and the outside pad was in good shape. I greased the pins before I replaced the pads the last time, but the inside still wore much faster. I also blew out the rear brake line last week and spent Saturday bending a new line and replacing that so the brakes were bled when I had to replace that. I don't feel the pulsing in the pedal, but the truck shakes pretty good when I hit the brakes. What else should I be checking if the rotors are new and the pads are new and the pins have been lubed and the brakes have been bled?
View 6 RepliesSonata NF (2006-10) :: Front Brakes Clicking Sound
I just replaced rotors and pads on my 2007 Sonata. I got top of the line premium rotors and ceramic pads from Napa. Cleaned the oil off the rotors and gave them a light sanding before installing, made sure that the caliper bolts moved freely and the caliper pistons were not seized and also used new hardware kit (springs?) that came with the pads.
Everything seems to be ok, except for a clicking sound that occurs on hard breaking as the car is coming to a stop. I think its caused by the pads moving within its mounts (I did notice it was very easy to slide these pads into the mountings, more so than in previous pad replacements).
Reading from other posts I think this is still safe, but the clicking does bother me, should I use pad adhesive to stick the pads to the caliper?
Sonata I45 (LF 2015+) :: Brakes Making High Pitched Noise When Applied And Backing Up
With only 1,800 miles on my 2016 Sonata Limited, the brakes make a high-pitched noise when applied and backing up. I noticed yesterday the noise has also started as I brake for red lights.
View 5 RepliesSonata NF (2006-10) :: Front Brakes Only Squeal When Applying While In Reverse
2006 Sonata V6. Front brakes only squeal when applying them while in reverse. Happens all the time......cold/warm start, cool/hot weather, dry/humid air. Squeal is extremely loud. I have searched and found similar but nothing exactly like this. Pads and rotors are fairly new and I have removed them and reinstalled and regreased twice. I am using ceramic pads and have never used them before. Is this common with them?
View 8 RepliesSonata NF (2006-10) :: GLS With New Front Brakes And Rotors Still Squealing / Grinding
I took my 2010 Sonata GLS (86K miles) into the shop last Thursday for an alignment and new front brakes since the old ones were on the wear indicators and doing some squealing/squeaking on soft left turns. Got a call from the mechanic who said the rotors were also shot, so I had them replaced as well.
On my normal commute on Monday and Tuesday this week (approx 10 miles, 95% highway), I noticed that when the car was moving at 15mph or less in a straight line both front wheels were making a noticeable high-pitched squeal/squeak, which went away with increased speed and when braking. I figured it might be a break-in issue but when it hadn't improved by yesterday I made an appointment to have the car checked out by the mechanic again today.
Got the car back today and the same sound is still happening, though now it's in the 60mph range and seems to come and go regardless of wheel direction. The mechanic said he took the brakes apart, found no issues but cleaned and lubed everything as a precaution.
I'm starting to wonder if its the bearings that are shot, but the sound hasn't remained constant as I would expect with a bearing issue. All the parts used are under warranty, so the next step I have available here is to have the brakes and rotors replaced.
Lexus RX 2004-09 :: Intermittent Front End Shimmy When Brakes Applied
2005 Lexus RX330. 98K miles. 2 year intermittent problem. When apply brakes the front end shimmies until car completely stopped then go again & all is well until at some future time it happens again. Dealer checked twice & private repair checked also. Nothing found. Tires re-balanced & rotated several times. Newer tires with no issues. This is an INTERMITTENT problem. The rotors have been, new pads & spring installed.
View 10 RepliesPrius (Gen 3) :: Grinding Noise From Front End When Applied Brakes At U Turn
Coming to a left turn signal I was anticipating it turning red on me, and I drove into the turn lane briskly 30mph and then applied brakes as I made a u-turn. It sounded like a cross between dragging the front air dam and metal on metal brake grinding as I made the turn. Stopped immediately and did not scrap the air dam and all front end components checked out, okay. Car is driving just fine now, has only done this once.
View 18 Replies