Golf V R32 :: Slight Grinding / Vibration Noise On Takeoff?
I've recently been hearing a grinding/vibration noise on takeoff. I only hear it pretty much as soon as my foot comes off the brake, when the car is in drive, and the car gets its first bit of forward engagement/movement. It seems to only happen when the DSG engages in drive, before I put my foot on the gas pedal.
The closest thing I can say it sounds like is an exhaust rattle, but way less violent/not metal on metal sounding.
Golf IV / Jetta IV :: Slight Grinding Noise On Startup
I've noticed recently that on startup I'll hear a minor grinding noise after the engine has kicked over. Seems to happen more when the car is really cold.
View 24 RepliesGolf/GTI VI :: Slight Grinding When Shifting Into 4th Gear
Just recently, my car 6 speed has started acting up and it's got me worried. First, and most notably, when I go to shift into 4th gear, there is a slight grinding noise and its a little tough to shift into 4th. Once it is in 4th gear, though, it shifts and drives fine with no other grinding noise. A buddy of mine says it might be the synchros, but what that means or how I can fix it.
Also, it has been having a rough idle on startup for a while now. It will idle at around 1,200 RPMs for a bit when I start it up, and it will kind of backfire out the exhaust a bit, kind of like it's a misfiring coilpack or something, but will usually go away after I drive for a bit.
Driving my car right now isn't very fun when I am only worrying about what's wrong with it, so I really want to get it fixed sooner rather than later, before these develop into larger problems.
Prius (2004-09) :: Slight Clunk Noise From Inside The Rear - Hatch Weight?
Hearing a slight clunk noise inside the back of thier gen 2? I've taken apart all the paneling used foam tape to secure things and took apart the spare tire area etc and the clunk persists. It seems to vary intensity every time I close the rear hatch.
View 4 RepliesIS F (2008-2014) :: Rattling Noise From Suspension / Clunk Or Slight Jerk When Shift Into First Gear
I recently got my 09 ISF and had a few questions pertaining to some noises I'm hearing. Of course I'm hearing the ticking from the motor but until it causes any issues I can live with it.. My real questions deal with
A: When I go over a bump such as a pot hole cover or something that makes my suspension articulate quickly at low speed, I hear a rattling noise from what seems like the suspension / hub. If it makes any difference in on 2012 shocks and soft springs. (my extended warranty is kicking in soon so I hope that it doesn't play a roll in it as I'm sure they will be quick to deny it)
B: When I am coming to a stop or slowing down and the car shifts into first on its own (I think only in manual mode) there is a clunk / slight jerk sometimes... It may be coming from the rear end? Is it some type of locking or unlocking that's going on?
Prius (2004-09) :: Slight Clunk Noise Inside Every Time Close The Rear Hatch
Have a slight clunk noise inside the back of their gen 2? I've taken apart all the paneling used foam tape to secure things and took apart the spare tire area etc and the clunk persists. It seems to vary intensity every time I close the rear hatch. I now suspect this thingy I found mounted in the center of the rear hatch under the plastic...
View 6 RepliesGTI 337/20th Anniversary :: Slight Grinding Noise In Neutral - Clutch Went Out
I was driving down the street and i noticed i couldnt get it in first gear, almost like a wall blocking it. and then i put it into 2nd gear and i started rolling... i turned my car off and when i started it back up, it had a slight grinding noise (in neutral). i put it in first gear, took out the clutch and i wasnt going anywhere... same with 2nd gear...
so i towed my car to the shop, they said my clutch went out and i "lost first and REVERSE gear".... is that possible?!
Toyota - Corolla :: 2004 - Slight Grinding Noise From Front Right
I have an '04 Corolla with 206k with a slight grinding noise from the right front when I make a left turn. Is it the outer CV joint? The noise sounds like the tire is rubbing against a splash guard but it's not.
View 3 RepliesFord Excursion :: Grinding / Clunk Noise And General Loose Feeling From Front End
But I'm still getting a grinding/clunk noise and general loose feeling from the front end. The only play I can feel is when I grab the u-joint/knuckle and pull up and down on it. I also noticed the seal at the end of the axle shaft tube is not there on 1 side... would this lack of seal cause the looseness?
View 9 RepliesSonata NF (2006-10) :: Slight Grinding Noise Coming From AC Pulley Area
I have a very slight grinding noise coming from the PS pulley area. Its possibly bearing noise although its hard to say. Is there a specific torque requirement. Any good parts...
View 1 RepliesPrius (2004-09) :: 2008 - Braking System Makes Slight Grinding Noise While Getting Below Around 10 Mph?
Just purchased a used 2008 prius with 80,000 miles on it. Braking system makes slight grinding noises when getting below around 10mph. I know the brakes are different, so I'm not sure if this is normal or if it means my brake pads need replacing? Car didn't come with an owners manual .
View 6 RepliesElantra XD (2001-06) :: 2004 - Transmission Making Slight Grinding Noise When Putting Into Reverse Only
No codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.
View 1 RepliesChevrolet - Tahoe :: 1996 - Lock Or Seize During Cranking / Slight Grinding Noise When Normally Starting
Have a 1996 Chevy Tahoe (305) Engine having engine cranking problems. It makes a slight grinding noise when normally starting. But sometimes it the noise is loud and seems to lock or seize during cranking. I tried shimming it without success, the gear even stuck in the flywheel. I had the starter rebuilt when the bendix stopped engaging the flywheel. I bought this PU second hand and the flywheel cover had been removed as if this truck has had existing starter problems. Also the flywheel teeth look ok.
View 3 RepliesFord Transmission :: 2001 F250 - Vibration And Grinding Noise When Drive Over A Slight Dip In The Road
2001 F250 7.3L 280k miles. Truck is new to me in the last 6 weeks. Was driving out to Glenwood Springs last night and I got a weird rear end vibration between 79 and 81 mph - couldn't say if it's a new vibration as haven't had the truck long enough. It's sort of still there over 81 but less obvious than bang on 80. Whilst the vibration was there I caught a slight dip in the road that caused a grinding noise to accompany the vibration - I'm guessing because something's was getting extra loading on the upside of the dip.
I'm away from home until Monday so my options are a bit limited, however while crawling around in the dark last night pushing and shoving stuff to see if anything was loose I noticed a couple of things:
Minor leak from pinion seal - but it has flung some spots of oil. Drive shaft 'center bearing'(? U shaped attachment on drive shaft to chassis with rubber bearing?) has play I can push the drive shaft at least a 1/4" with my hand and it seems a little sloppy but I'm no mechanic.
I'm going to check transmission fluid level today and top up if required and check the magnets, such that I can limp home as necessary avoiding 80 and get the diff checked and pinion seal replaced. Does the drive shaft bearing need changing or should it have that much play? I'm assuming it's LSD on the rear?
Ford Super Duty (1999-2016) :: Grinding Noise And Clunk Felt In Brake Pedal Upon Stopping
I have a 2005 F-250 4x4 and recently i noticed a grinding noise while driving and then when I come to a stop I hear a clunk and the grinding stops. It sounded like it came from the driver side wheel so I changed the wheel bearing assembly. About 3 days later it started again. Now it sounds like it's coming from both sides. I am at a loss. The hubs are unlocked. It's hard to describe the sound but to me it sounds like 2 gears with a large chain rotating on them. I hope that made sense. The clunk can be felt in the brake pedal.
View 2 RepliesFord Super Duty (1999-2016) :: Grinding Noise At Slow Speeds - Clunk When Coming To A Stop?
Every once in a while, while driving my 06 350 SRW at slow speeds, I hear a grinding noise coming from the left side of the truck. It is almost like a winding grinding noise if that makes sense. It will grind slow to a stop, and then I hear a clunk.
This is a very intermittent problem. The tires are completely shot on the truck, and I thought that would be it, but considering it is intermittent and the clunk I hear as I come to a stop I figured it could be it.
Ford 7.3L Power Stroke (1999-2003) :: 2001 - Slight Whine / Grinding Noise Only In First And Reverse
I have a 2001 f 350 7.3 diesel r 400 tranny 320000 miles. . Im having transmission issues. It makes a slight whine/ grinding noise only in first And reverse. And it surges. Sometimes its fine though to. Check engine light came on. Only codes i get are #4 glow plug out and a low boost pressure. Checked boost before fixin Running fine at the normal about 20 psi. ive read a bad or dirty map or iat sensor can cause transmission issues along with the low boost error code. But in my experience and some reading it sounds like a stall converter.
View 9 RepliesMercury - Cougar :: 2000 - Transmission Started To Make Clunk Noise Inside And Slipping
I have a 2000 mercury cougar 2.5 liter. I bought the car without doing much research. now that i have the car did research and found out all the great problems that this car has. My transmission started to make a clunk clunk noise inside and it started to slip. At first it would go on all gears. then very rapidly started to slip in all gears. In matter of hours went from being good to being crap. i had to accelerate the car to 3000rpm or higher to make the car start moving. So i bought a transmission from a junkyard. I install it and did not work. The car did not move on any direction. I pull it out and look at it and found the small shaft that goes from the torque converter to the gear body was broken. I end up getting another transmission from the junkyard. I check it and everything looked good. I install it and got everything back together and that work on reverse but no forward. To get it on reverse I had to accelerate the car to 3000rpm. I being told that if I change the solenoid inside the transmission might fix the problem. It could be the transmission module that is burned out.
View 1 RepliesLexus IS 2014+ :: Slight Binding / Grinding Feeling Or Faint Noise When Front Wheels Are At Full Lock
So I'm new to the all time awd car thing. I came from a 4x4 truck which 4x4 was never engaged on pavement or in tight cornering. When maneuvering my is250 awd in tight spots ie. parking lots and the front wheels are at full lock in either forward or reverse there is a slight binding/grinding feeling or faint noise. Is this normal on an awd car or Lexus specific??? Did a quick search and didn't find much about this issue. I'm pretty sure its not tire rub.....stock set up.
View 10 Replies