Phaeton :: Noise From Right Rear That Sound Like Something Winding Up And Down
Friday when driving home I kept hearing a weird sound from the right rear that sound like another engine running while going 30 to 70 MPH. The noice sounded like something being winding up and down. Take your foot off the accelerator and the noise was still there. Not sure if its the Tranny or Differental or some bearing.
Took it by the dealer on Saturday and the Service writer could not figure it out. They plan on looking it over on Monday or Tuesday. What I might find on strange noise. The car just turned 47,000 miles so its still under warranty.
Golf/GTI VII :: Turbo Winding And Slight Blow Off Sound?
I got my APR ECU & APR Intake done at the same time about a month ago. After both the upgrades I hear the turbo winding and a slight blow off sound more between shifts. Is this due to intake or ecu tune? My brother drove my car yesterday and asked me however I told him I'm not sure...
View 1 RepliesChevrolet - Silverado :: 2004 - Rear Brakes Make Strange Winding Sound When Coming To A Full Stop
2004 Chevrolet Silverado 1500 4WD.... Rear brakes make strange winding sound when coming to a full stop, noise only apparent under 5MPH. They have been completely done over. Rear end issue? Changes gears fine, brakes work ok.
View 1 RepliesSonata NF (2006-10) :: 2009 - Rubbing Sound From Right Rear
My 2009 Sonata has developed a 'rubbing' sound that seems to be coming from the right rear wheel. The brakes are new, the rotors are fine, there are no marks on the tire or wheel. This sound only shows up when I apply the brakes and generally at slowing speeds. If I press the brake pedal down hard the sound doesn't emit. We have checked suspension, brakes, rotors, tire and wheel.
View 2 RepliesAurora :: 2001 - Rubbing Sound From Rear When Brakes Are Applied
I have recently had the rear brakes on 2001 Aurora replaced. When car is driven about 20 minutes, there is a rubbing sound from the rear when the brakes are applied. I have taken the car back to the shop and they said for some reason the new pads were worn and put new pads on thinking it was bad pads. The noise continues. Is there anything special that must be done on this car when the rear brakes are serviced? Are there special type of brake pads that must be used for rear disc brakes? I am just going to sell the car if I can't figure out how to fix this problem soon.
View 6 RepliesFord Excursion :: Rubbing / Grinding Sound From Rear End When Taking Off From A Turn
I have noticed this rubbing, not quite grinding sound/vibration when I take off and turn. For instance pulling out of a parking lot and turning either left or right. Truck will do it only after it's been driven a while. I originally thought it was just the limited slip ratcheting but recently just changed the rear axle fluid adding Amsoil this time. I did not add any friction modifier because I didn't think the Amsoil needed it. So after going on a 500 mile trip I find it is still doing it. The truck sits at the stock ride height and has stock size wheels and tires on it. What it could be ? It only happens in the turn, not while driving straight. It still sounds like the differential but just want to be sure.
View 7 RepliesGolf V R32 :: Rubbing Or Grinding Sound Under About 20 Mph
It started a couple months back, under about 20 mph I feel/hear a rubbing or grinding sound. Appears to be coming from the front end, I put I on a rack and drove it but couldn't isolate a cause. I rotated the tires, replaced the brakes to be sure there was no warping. Everything looks good, but something clearly isn't.
View 2 RepliesGolf VI R :: Rear Diff Rubbing Through Exhaust
So I put the R up in the lift today to look for a rattle underneath and I ran into this..
View 7 RepliesGolf IV R32 :: Loud Humming Sound Like The Brakes Are Rubbing
When I am in reverse sometimes the left rear makes a loud humming sound like the brakes are rubbing or something. What do you think this is???
View 3 RepliesMazda - Mazda3 :: 2005 - Winding Sound At Highway Speed
For the last few weeks my car has been making a winding sound at highway speeds. It sounds as if it is winding out at high rpms but it isn't. When I let off the gas, the sound doesn't decrease until the car begins to slow significantly. It also seems not to make the sound if I am going around a right hand curve. The car is a 2005 5-speed mazda 3.
What the problem might be? And is it safe to drive 600 miles back home before having it checked out. With the holiday, I don't have many options.
Golf VI R :: 2013 With 30K Miles - Whirring / Rubbing Sound During Deceleration
Started getting a whirring / rubbing sound during deceleration and took it into dealer for diagnostics. They said driveshaft needs replacement. Fortunately they are covering under warranty but it's got me concerned about longevity.
I've got an APR Stage 1 ECU upgrade but otherwise stock. Not a track car and i'm not moonlighting at the drag strip dropping the clutch at 5000 RPMs to try and make into the 11's so am baffled by the issue.
Golf/GTI VI :: Rubbing Sound / Deep Squeaking From Strut Mounts
So everything is tight and aligned and all good, but I'm getting this deep squeaking rub noise coming from my front upper strut mounts, but all the bolts are tight, yet it looks like the metal ring inside the strut tower moves a little up and down when you rock the car a bit. And I can feel the rubbing vibration and movement of the mount when I put my hand on/in the strut tower while the car is rocked.
View 1 RepliesGolf IV / Jetta IV :: Low Rubbing Sound Specifically When Turning Or Banking Right
So I've had a low rubbing sound specifically when I'm turning or banking right. I don't want to put much more money into this mk4 because I'm planning on getting a new car in the next 12 months. How do I know which bearing needs replacing?
View 2 RepliesGolf IV R32 :: Noise From Rear Diff Like Something Rubbing Or Tire Skidding
Fixed my AWD. Needed a new Haldex pump. Did a fluid change and new Haldex filter. All using factory stuff.
AWD works great now. The problem though is when im making tight slow speed turns. I.E. backing out of a parking stall. I get a noise from the rear diff like something rubbing, or a tire skidding.
Is this normal? I bought my car from the dealership without my AWD working and just got it fixed, so I really didn't know what an AWD R32 was like.
Golf/GTI VI :: Rubbing / Humming Sound Occurs Below 10MPH And Increases Above 60MPH
So I have a 2014 VW GTI 4DR 6speed with 25,000 miles on her now and I am getting this weird noise from what i believe is the front end right wheel?
The noise is similar to a rubbing / humming sound that occurs below 10MPH and then increases with repetition at say above 60MPH. I notice a little harder of a rubbing when wheel is turned at say when i pull out from a stop sign!
ALL that i have done was put on hubcentric spacers and that i pulled off to see if noise stopped but it didn't! Could the supplied bolts be to long? I had removed dust caps on rear for clean fitment and sanded any imperfections on all hubs.
The noise isn't loud at all but is definitely noticeable with radio off and windows up!
Could this be a wheel balance issue? Tie rod or arm? Bent RIM?
Golf IV R32 :: Strange Vibration And Rubbing Sound When Driving At Slow Speeds?
Just had a hub get stripped a few weeks back and had to replace the whole hub assembly. Now just a few weeks later, I started developing this strange rubbing, almost scraping sound when backing of the garage in reverse and the diving speeds of like 5-10 mph. It has to be wheel related becuase the sound goes in and out as the wheel goes around.
Put the car up on jack stands , checked fender plastic underneath the wheel wells, dchecked the dust sheild on the rotors, checked the tires out, even spun the rotor around with my hand and I couldn't replicate the sound?
Just Started about 5 days ago and was only noticeable at slow speeds every other day, then today it seemed worse and I can almost hear it when driving 25-35 mph and I'm also starting to feel it in the steering and body of the car as a vibration.
I just want to get this car back running smooth... Just put new suspension on as well, new strut bearings, but I had to reuse the strut mounts because the dealership was out of mounts. Don't think the suspension has anything to do with it, but you never know. How to upload a video... I can see if I can somehow record the sound.
Golf/GTI VII :: Ticking And Coin Rubbing Together Sound When Accelerating Until About 2200 Revs
Recently bought a 2015 Golf Tsi. i have done around 4000 miles. there has been a ticking and a "coin rubbing together" sound when accelerating until about 2200 revs. dealer could not find the solution... the car has been very jolty, and at very low idle speeds, very rough and stuttery. The video shows the ticking. Could it be an exhaust/fuel injector problem? [URL] .....
View 3 RepliesPassat (B5) :: 1999 - Engine Makes A Pretty Cool Sound Like A Turbo Winding
I have a 1999 passat 1.8t with 197k miles. When I drive if you listen really closely the engine makes a pretty cool sound like a turbo winding. It's a really really low whooooooo on the first and second gear. You cant hear it unless you have the windows down and there's like no other cars. Is this normal? My friend said the turbo might be going bad ?
View 5 RepliesGolf IV / Jetta IV :: Clunking / Rubbing Sound On Right Passenger Side Especially When Turning Left
I have the most terrible clunking/rubbing sound on my right passenger side, especially when I'm turning left. When I drive straight it sounds like the wheel is hopping even when going over minuscule imperfections in the road. I also get a terrible rub when going over speed bumps or into grooves and dips in the road.
I've searched and searched but cannot come up with a answer towards rectifying the issue. My car hasn't been lowered; I'm running the stop 337 suspension. I've replaced the following within the past two years:
-control arm bushings
-ball joints
-tie rod ends
-upper strut bushings and bearings
-passenger side axle
-dog bone mount
-engine mount
-tranny mount
Most recently:
-front struts
-sway bar end-links
-driver's side axle
It seems to like everything should be solid considering I've done all of this crap. I don't understand why I'm having this issue and why it sounds like it is getting worse and worse.