IS F (2008-2014) :: PPE Headers Install - Rubbing / Grinding Sound While Taking Right Turns
I had my local race shop install my new PPE headers and how I have a rubbing and grinding sound while taking right turns. They have had the car for a few extra days and they say they cant seem to find the cause of the problem. It rattles on a pot hole, it grinds on right turns and sometimes vibrates on highway cruise control driving.
View 14 RepliesFord - Explorer :: 2013 - Grinding / Rubbing Noise In The Middle Of The Turn
My new 2013 Ford Explorer Limited (5000 miles) recently started making a grinding/rubbing noise with a slight to significant braking action in the middle of turns (typically left turns, at moderate to slow speed, e.g., at stoplights) when my foot is on the accelerator, not the brake. Lasts about 1 second, happens once a day or so, typically when the car is cold. The dealer was flummoxed, tried replacing the steering gear, but the same thing happened as soon as I drove out of the lot. Apparently no codes showing on brakes or ABS.
View 2 RepliesFord Ranger / B-Series :: Grinding / Rubbing Noise In Left Turn Only
I recently acquired a B4000(for a steal!), had it almost a month now and im starting to notice a few problems, all driveline related (I think).
1. Have a "grinding/rubbing" noise in a LEFT turn only. It is a 4x4 and I haven't turned a bolt on it yet, save for very minor stuff. Since this particular model has some costly parts, I'm trying to prevent buying unnecessary parts! I have a set of 31 x 10.50 on it, and even though there is some minor tire rub, im 90% certain this is not the case.
2. Has a somewhat "hard" shift when going into O/D(I think), doesn't do this all the time, I wonder if problem #2 and #3 are related.
3. Appears to be about 1in slack in the rear driveline, wondering if it is the rearend, and specifically the spider gears or pinion?
4. Also seems to be just a LITTLE slack in the front left CV axel, is this something I should be worried about? the front right is good and tight, Tcase shifts like its suppose to.
Ford - Explorer :: 2003 XLT - Rubbing Or Light Grinding Sound When Put In Park
I got a strange one. 03 expl 4x4 xlt, started making a weird sound, almost like a rubbing, or a light grinding, comparable to the sound and seat of the pants feel you would get if say you ran out of good brake lining and were creeping the car forward at half mph while dragging the breaks slightly but (except it is when you are stopped and in P). Break pads are fine, just when you come to a stop and put it in park. lasts for about 1-3 seconds. No tranny slippage or other issues yet, all seems to be working. I don't use 4x4 hardly at all but not in last 6 months since there is no snow. Since it is so short I cannot pop the hood to track it down. Torque converter? Fan clutch?
View 3 RepliesFord F-150 (2009-2014) :: 2010 - Rubbing / Grinding Noise From Rear End
Just got a 2010 lariat supercrew...I put 1900 miles on it so far. When slowly letting off the accelerator (doing between 20-30 mph and between 1000-1500 rpm) there is a distinct rubbing sound for about 1-2 seconds...it is now sounding more like grinding now...took it to the shop today...(they couldn't duplicate (because service rep documented 60 mph instead of the 20-30 mph...went back at the end of the day to ride with the tech, and i was able to duplicate so now they have something to work with....also the noise happens mostly when the path of travel is either level road or slight to great incline..it has not happened on a down slope....
View 14 RepliesFord - F150 :: 2003 - Grabbing / Grinding - Metal Rubbing Sound And Shakes In Braking
I have 2003 F150 SuperCrew 5.4L XLT. For past month or so, have been hearing metal rubbing sound and had shakes in braking - as well as a "grabbing and pulling" sound near brake pedal - very aggravating to say the least. Weird thing is the grabbing and pulling sound only happens under 10 miles an hour or coming to a complete stop. (The grabbing sort of sounds like the sound the ABS makes when hit really hard)
Yesterday I had brakes and rotors replaced - mechanic said front rotors were beyond turning - very bad. 135,000 miles on truck. Felt more comfortable until I pulled out of shop and when I applied brakes, had the same grabbing/grinding sound, but no pulling. Went back to mechanic and had him ride with me to hear sound, and he is stumped.
Knew it was safe(r) to drive since new pads/rotors installed, but when I got up to 55mph and barely touched the brakes, the steering wheel began to shake violently - but no sound/grabbing from brake pedal area like I get when I am 10mph or under. Really at a loss right now.. What's going on?
Truck is a 2WD, also hear some thump thump thump sounds from front left tire, which are only one year old, but tire man said that was from suspension arm or something - nothing to worry about he says.
Some people have said "bearing" or "hub" but when brakes were replaced, the bearings were repacked...is this the same thing? Is the current problem safe to drive with? I do not take vehicle out of the county - just to work and back and hunting on weekends.
Golf V R32 :: Rubbing Or Grinding Sound Under About 20 Mph
It started a couple months back, under about 20 mph I feel/hear a rubbing or grinding sound. Appears to be coming from the front end, I put I on a rack and drove it but couldn't isolate a cause. I rotated the tires, replaced the brakes to be sure there was no warping. Everything looks good, but something clearly isn't.
View 2 RepliesFord Super Duty (1999-2016) :: Intermittent Grinding / Rubbing Sound Coming From The Wheel
I have a 2000 F-250 Crew Cab with Lariate Trim package (not sure how that could be relevant to the issue, but it might be?) and auto locking Hubs. Recently, the truck has taken to making an intermittent grinding/Rubbing sound that comes seems to come from the wheels. I can not locate the sound exactly since it only happens when I'm Driving, I have never heard the sound at any speed lower than 20 mph or when the 4x4 is engaged either manually through he hubs or the selector in the cab when the hubs are in auto. All this leads me to think that I need to replace the autolocking hubs, but i'd like a second opinion (or even third) before I go to the trouble of replacing them.
View 1 RepliesBmw :: Rubbing / Grinding Noise From Rear Right Wheel
I just recently I have been experiencing a rubbing/grinding noise from the rear right wheel, also it has made a clonking noise like a flat tyre but it isn't, I can hear the noise from about 25/30 mph when I go faster or slower i cant hear the noise.
View 2 RepliesFord Excursion :: Rear Hatch Rubbing Barn Doors?
The rear hatch on our ex, is starting to dig into the fiberglass of the barn doors. Paint is already gone, just white fiberglass. This wasn't an issue was first, however we have been opening and closing it quite a bit more than we used to. How to resolve this issue?
View 14 RepliesFord Excursion :: Louder Roar Coming From Rear End When Taking Foot Off The Accelerator Without Pressing Brake
After putting my front end back together except new springs, new shocks, and new track bar, just to give everyone a little history of what I've done to it. I've had it for 8 months and maybe put 1000 miles if that because of working out of town a lot and the front end torn apart. I've noticed a louder roar coming from the rear end when taking my foot off the accelerator without pressing the brake. It feels like the tow button is engaged, but isnt. I have no issues with handling besides knowing it still needs alignment. I'm taking it to the dealership tomorrow for a 4 wheel alignment. It sounds and feels like I'm riding on mud terrain tires.
View 14 RepliesFord Excursion :: Tire Rubbing Sound On Slightest Bit Of Turning Effort?
So I just completed my hydroboost install and fixed exhaust manifolds. After this install the below problem started.
ISSUE: While going slow and straight no problems. Slightest bit of turning effort left or right makes a sound like a tire rubbing on leaf springs. I can also feel the vibration. It happens in drive while moving or in neutral while moving. Happens wither hubs in auto or locked. Happens in 2wd or 4wd. It's not the steering pump cause it wines a tad now when brakes applied and I turn steering wheel. So I know what that sounds like. Expected that.
Jacked it up and checked for any movement in steering or ball joints and found nothing.
X does not make the sound above 15 mph. It's annoying....sounds and feels exactly like tire lugs hitting the leaf springs but they are not.
Toyota - Sienna :: 2008 - Slight Grinding Or Rubbing Sound When Braking
I have an 08 Toyota Sienna and yesterday I started to notice a very slight grinding or rubbing sound when I apply the brakes coming from the passenger side front wheel. I can only hear the grinding or rubbing sound when I am going very slowly (like the last 20 feet when approaching a stop sign). The sound pulses slightly like two surfaces that are not parallel are rubbing. There is no pulsation or wobble felt in the brake pedal. I'm thinking it's time to get the rotors turned, but it could also be the brake pads.
View 5 RepliesFord Excursion :: 2000 - Left Front Wheel Is Making A Rubbing Sound?
I have a 2000 Excursion 2wd. The left front wheel or something up front is making a rubbing sound when I turn to the right. Checked the brakes, they looked fine. Pulled front rotor off and replaced the wheel bearing just incase. Still making that same noise? I can't see any sign of something rubbing either on the frame, brakes lines, or control bars?
View 3 RepliesSanta Fe (DM - 2013+) :: Rubbing / Faint Grinding Sound Emanating From Right Front Corner
A few days ago I purchased a brand-new 2015 Santa Fe Sport 2.0T LTD, with about 80 miles on the odometer. During the test-drive, I noticed a rubbing/faint grinding sound which emanated from the right front corner, and only lasted a second or two. I was driving straight ahead at about 30mph on a relatively smooth paved road at the time.
The dealer told me they were aware of the noise, and claimed a small stone was to blame. (it had been test driven a number of times). I was assured that the problem would be fixed when I picked up the car.
On the drive home from the purchase, it did it again, and has done it every day that I've driven it. (about 150 miles on it now). Are these wheels susceptible to having stones lodged in them?? (assuming that's actually what's causing the noise).
Elantra MD (2010-15) :: Loud Rubbing / Grinding Sound From Front Wheel Area While Turning
Early this week my car started making a loud knocking/rubbing sound (Kind of in between when your brakes are ground down to the rotor and a knocking pattern).
FIRST, it started only when I turned slightly left or left.... NOW, it's doing it as I go straight and when I turn to the right as well... oddly enough it's not as bad when going left anymore...
What this could be?? And if it's an easy DIY fix..... (maybe a link on how) and how much the part(s) might be?? I've taken video (for sound as I drive)...but not sure if I can upload it (size limit).
Ford 6.0L Power Stroke Diesel :: Rubbing Sound Can Be Heard Through The Turn On Truck
6.0L Forum - I've noticed an unusual sound on my truck. Upon driving if I make a turn more than 15 degrees a "rubbing" sound can be heard through the turn, no "knocking" is not present. Once the steering wheel is straight the sound changes to a "whir". If I turn less than 15 degrees a noticeable sound can not be heard. As the RPM's vary, the sound will also vary. If I get out of the truck and listen for this sound in the engine bay I can not hear it. The sound is only distinct within the cab. It sounds like a weak motor trying to move something or a pump running low, my guess in the dark.
I've checked the oil level - good
I've checked the transmission fluid level - good
I've checked the power steering fluid level - good
I've checked the brake fluid - good
I have read that a master cylinder could wear and create a rubbing/unusual sound. What else should I check for? The truck has 238,000 miles.
Ford Excursion :: Grinding Sound While Turning?
When turning right, either sharply or just during a long gradual turn in the road, I hear a grinding or running sound consistent with RPM coming from the rear - I think the right rear. It driving flat, no sound. If turning left, no sound. To me, it seems if the right rear is unloaded a bit weight wise, the sound occurs.
I'm thinking wheel bearing. Hoping not differential, but it really does seem to come from right rear not center of rear. Only if turning right and moving weight to left side.
Ford Excursion :: Grinding Sound While Driving Along At A Moderate Speed In 2WD
I can't isolate whether this is in the transfer case or the front axle.
While driving along at a moderate speed in 2WD the truck GRADUALLY began making a grinding sound, similar to riding on grooved pavement or over a steel bridge. It stops IMMEDIATELY when switched to 4WD.
I can ride for 10 miles before the growling begins. When switched back to 2WD the noise returns gradually usually after a minute or so.
The frequency of the sound is faster than the rotation of a driveshaft and it continues right down to a very low speed at just about the same intensity.
I've read a few posts on here that suggest spindle bearings, but the problem came on very abruptly and usually bearing problems, from my experience start small and get worse. Last week I changed brake pads and rotors.